PROVN OF CHAIN LINK FENCING AROUND MT AND JCOs MESS OF 5017 BN (MT) AND PROVN OF CLOTH LINING FOR 48 MD QTRS IN NEW COLONY AT MIL STN KANCHRAPARA UNDER GE BARRACKPORE

Amount

Excavating in post holes (or similar holes) in soft /loose soil each not exceeding 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good the surface complete all as specified and directed.

Removing surplus excavated materials to a distance exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting points in soft/loose soil complete all as specified and directed.

Surface dressing in soft /loose soil not exceeding 15 cm deep complete all as specified and directed.

M&L for broken bricks hardcore of gauge not exceeding 63mm, deposited spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for RCC (1:1.5:3) type A-1 (Nominal Mix) (using 20mm graded stone aggregate) as in precast post, fencing post, straining or terminal post, struts etc for fencing, average sectional area exceeding 100 Sqm and not exceeding 250 Sqm with or without chamfered angles and flat, splayed, rounded or mitred top complete all as specified and directed.

Fixing only galvanised iron chain link fencing including line wires, any mesh, size and type to any type of standards, rails, staining bolts, etc. and fixed with 10 mm dia MS round bars and straining including provision of binding wire for securing chain link fencing as per relevant IS specification and as approved complete all as specified and directed. (Note: 10 mm dia MS round bar shall be measured and paid separately under Item No.8.00 here-in before as "supply only")

Supply only MS round bars 10mm dia for securing chain link fencing fixed to RCC fencing posts as per Fe-410-W (Gde- E-250) quality 'A' or Fe-290 (Gde E-165) complete all as spcrified and directed. (Note: Meterials to be used in item No.7.00 here-in-before)

Supply only galvanised iron (200-220 GSM) chain link of 75x75mm mesh and 4mm dia wire complete all as specified and directed. (Note: Meterials to be used in item No.7.00 here-in-before)

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate), as in sub base, plinth protection etc complete all as specified and directed.

M&L for TMT bars 10 mm dia and over cut to length bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F of angle iron posts and struts in fencing including embedding in concrete, cutting tops to shape as directed, drilling holes, notching for wire etc including MS flat iron fillets and MS Nut and bolts, (for securing wire meh etc) including all necessary drilling, bolting, welding or riveting etc and similar work conforming fo Fe-290-Gde-E-165 complete all as spcrified and directed.

S&F for mild steel screw bolts (machine made) 11 to 15mm with hexagonal or square head at one end and screwed the other end, or screwed both ends, each screw end to be fitted with two washers and one hexagonal or square nut, length of bolts not exceeding 15cm and dia of neck 12mm complete all as specified and directed.

S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. after and including taking down old unserviceable galvanised steel barbed wire complete all as specified and directed. (Note: Each line of wire to be measured).

S&F for MS rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including where required drilling, fittings, riveting or welding connecting with fish plate, gusset plates etc of Fe-410-W (Gde E-250) quality 'A', including preparation of surface and painted one coat shop coat of zinc chrome primer at Contractor's workshop before fabrication complete all as specified and directed. (Note : (a) Quoted rate shall be inclusive of fixing lining wire and stainless steel eye bolt. (b) Cloth line wire and Stainless Steel eye bolts shall be measured and paid under relevant 'Supply only' item Nos. 17.00 & 18.00 here-in after).

Supply only high strength stainless steel (SS-304 or above grade) full thread bent eye bolts, 8mm dia thick with eye 10mm dia and 120mm long with one nut and steel washer complete all as specified and directed. (Note : Material to be used in item No. 16.00 here-in-before).

Supply only PVC coated (minimum 2mm coating as per IS-4826) 4mm dia GI wire confirming to IS-280 complete all as specified and directed. (Note : Material to be used in item No. 16.00 here-in-before).

M&L for laquer coated chequered cement concrete tiles 30cm x 30cm x 25mm thick (glossy type), set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer after preparation of new or previously untreated steel surfaces of any description over 10cm width or girth complete all as specified and directed.

M&L for applying three coat of white wash after preparation of new plastered or unplastered or concrete surface complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer after preparation of new steel surfaces of any description not exceeding 10cm width or girth complete all as specified and directed.

M&L for preparation of surface of new steel and iron work of any description, not otherwise described, and treated with tar or coal tar black paint treating ends of posts etc., are tarred exceeding 0.5Sqm each complete all as specified and directed.

M/s S K SHARMA (BID ID -3127712)

R.S. COMPANY (BID ID -3126526)

M/S. M. S. CONSTRUCTION (BID ID -3126955)

INDUSTRIAL CONSTRUCTION (BID ID -3127708)

M/S H.P Singha (BID ID -3127490)

DEYS ENTERPRISE (BID ID -3127715)

azad enterprise (BID ID -3127803)