PROVISION OF 04 GUARD ROOMS WITH TOILET FACILITIES AT AF STN HIGHGROUND

Amount

Building Work

Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed. Note : Rate quoted by contractor shall be deemed to include necessary scaffolding etc.

Material and labour for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and directed. Note: The rate quoted by contractor shall be deemed to include cost of necessary scaffolding.

Material and labour for rendering 10 mm thick in cement mortar (1:3), on ceiling, finished even smooth without using extra cement , complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:4), in two layers, using water proofing compound as per manufacturer's instructions, on brick/concrete surfaces of walls, finished even fair , complete all as specified and directed. Note :- 1. Supply only water proofing compound will be measured and paid for separately.

Supply only integral water proofing compound, complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of 1st quality oil bound distemper (oil emulsion) over and including 1mm thick Birla/JK wall care putty, complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having Volatile Organic Compounds less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistant, dirt resistant exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm of surfaces, complete all as specified and directed. Note: Weather proof exterior emulsion paint and primer shall be of same manufacturer.

Material and labour for preparation of newly plastered surfaces of ceiling and applying two coats of 1st quality oil bound distemper (oil emulsion) over and including 1mm thick Birla/JK wall care putty, complete all as specified and directed.

Material and labour for complete removal of existing treatment on wall and applying two coats of 1st quality oil bound distemper (oil emulsion) over and including 1mm thick Birla/JK wall care putty, complete all as specified and directed.

Material and Labour for complete removal of existing treatment and applying two or more coats of 100% Premium acrylic emulsion paint having Volatile Organic Compounds less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistant, dirt resistant exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm of surfaces, complete all as specified and directed. Note: Weather proof exterior emulsion paint and primer shall be of same manufacturer.

Material and labour for complete removal of existing treatment on ceiling and applying two coats of 1st quality oil bound distemper (oil emulsion) over and including 1mm thick Birla/JK wall care putty, complete all as specified and directed.

Supply and fixing in repairs Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms), complete all as specified and directed.

Supply and fixing in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), complete all as specified and directed.

Supply and fixing in repairs urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms), complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame), not exceeding 1.5 Sqm each and removal, including making good the disturbed surface in CM(1:4) and finishing as per existing specifications and removal of debris outside MOD land, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame), exceeding 1.5 sqm but not exceeding 4 sqm each and removal, including making good the disturbed surface in CM(1:4) and finishing as per existing specifications and removal of debris outside MOD land, complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed

Taking down shutters of any description not exceeding 1.0 Sqm each, from chowkhats/frames and removal to store for reuse or credit, complete all specified and directed

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, from chowkhats/frames and easing, adjusting, resecuring and refixing in the same opening, complete all specified and directed

Easing, adjusting, resecuring shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, without taking down from chowkhats/frames, complete all specified and directed

Material and labour for cutting holes in brick wall built in cement mortar for taking out/ inserting hold fasts , and making good disturbed portion in cement mortar (1:3) or cement concrete 1:2:4 type B-1 as required, depth of embedded portion of hold fasts measured from the face of the jamb into the wall exceeding half brick but not exceeding one brick thick , and removal of rubbish outside defence land complete all as specified and directed.

Supply and fixing factory made pressed steel frames for doors with two rebates, of size 125mmx60mm, made out of 1.25mm thick sheet, including necessary fixing lugs, hinges, lock strike plate, etc,including back filling of PCC1:3:6 type C-0, and one shop cot of primer, complete all as specified and directed.

Supply and fixing factory made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face , supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

Supply and fixing factory made 2nd class hardwood, glazed and skeleton shutters, 35mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed. Note:- Wire cloth shall be mesured and paid separately.

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing in SSR Part-II, in opening, complete all as specified and directed.

Supply and fixing in the frame at site, factory made solid PVC panel door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing in SSR Part-II, complete all as specified and directed.

Supply and fixing Factory made box type steel window with pintol hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handles and with glazing bars, dovetailed or welded in glazed shutter and without glazing bars for wire gauged shutter , including provision of grill, all as per drawing and with one shop coat of zinc chromate primer, complete all as specified and shown on Drawing No CEAF/STD-184-2012 Sheets 1/3, 2/3 & 3/3. Note:- Sheet glass and wire cloth will be measured and paid separately.

Supply and fixing factory made box type steel secion ventilators, fixed type with glazing bars and with one shop coat of zinc cromate primer complete all as specified and and directed.

Supply and fixing sheet glass 4mm thick, ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 sq. m in each pane, including one coat of syntetic enamel paint to match to existing surfaces,complete all as specified and directed.

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.

Supply and fixing 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed.

Supply and fixing 200 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and directed.

Supply and fixing 150mm long, extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and directed.

Supply and fixing Aluminium alloy, anodised, sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 12mm dia, complete all as specified and directed.

Supply and fixing 300mm long ordinary rat tail rod pattern MS door springs including roller and roller plate, complete all as specified and directed.

Supply and fixing 140 mm door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring fixed in door, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land complete all as specified and directed.

Material and labour for Non skid jointless coloured ceramic tiles 7 to 8 mm thick (square/rectangular ) area each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in C:M 1:4 complete all as specified and directed.

Material and labour for first quality glazed printed pattern coloured glazed ceramic tiles 450mmx300mmx7mm thick fixed in pattern to wall (combination of dark & light colour with border) as in skirting, dado, set and jointed in neat cement slurry, over and including 10 mm thick rendering of cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified.

Material and labour for light shade/double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm,as in skirting, dado and risers to steps etc.set and jointed in neat cement slurry, over and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles. complete all as specified and directed.

Material and labour for light shade/double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm,laid over and including 15mm thick screed bedding in cement mortar 1:4 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of cement concrete ( unreinforced) of any description and in any position not otherwise specially provided for including removal of debries out of defence land complete all as specified and directed

Material and labour for 75mm thick Plain cement concrete (1:3:6), Type C-2, using 40 mm graded stone aggregate as in plinth protection, finished the surface even and fair, complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed..

Material and labour for 20mm thick Granite black/brown in colour (of any type), (table rubbed and polished), machine cut, as on cooking platforms, window cills, steps and like, set in neat grey cement slurry @ 3Kg/Sqm, laid over and including 15mm thick bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Material and labour for 20 mm thick Granite black/brown in colour (of any type), (table rubbed and polished), machine cut, set in neat grey cement slurry @ 3Kg/Sqm, in skirting/ dado laid over cement plaster in CM 1:4 , 10 mm thick and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, moulding and polishing complete all as specified and directed by Engineer-in-Charge.

Material and Labour for machine cut Kota stone slab flooring 20-25mm thick including white marble strip 50 to 75mm wide and 20 to 25mm thick laid in the pattern as approved by GE, over 15 mm thick cement mortar (1:4) screed bedding base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab rubbing and polishing complete all as specified and directed.

Material & Labour for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid and jointed with neat cement slurry, over and including 10mm thick rendering of Cement Mortar (1:4) including pointing in white cement with pigment to match the shade of stone slabs, complete all as specified and directed.

Supply and Fixing in repairs Brass chromium plated shower rose 125 mm size with or without swivel joints, fancy type with CP arm concealed type with CP cup including fixing to steel pipe or union 15mm bore complete all as specified.

Supply and fixing stop valve, cast copper alloy, fancy type, long shank and cup (concealed), chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore, fixed as in repair, including removal of old to store for reuse or for credit, complete all as specified and directed.

Supply and fixing in repairs vitreous china wash down water closet (pedestal pattern) white pedestal pan and trap, including connection to drain ( or out going pipe ) and to flushing pipe, antisyphonage pipe, with plastic water closet seat cover white , closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc, including flush pipe, complete all as specified and directed.

Supply and fixing bib tap, cast copper alloy, fancy type, chromium plated, with capstan head, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm bore dia, fixed as in repair, including removal of old to store for reuse or for credit, complete all as specified and directed.

Material and Labour for Cutting chases in brick work, pinning in making good to facings where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills etc and cutting chases for concealed water tubing and making good, cutting not exceeding 10 cm in girth and removal of rubbbish outside MOD land, complete all as specified and directed.

Taking up or down existing steel water tubing and connections, 15mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.

Supply and fixing galvanized steel water tubes 15mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed.

Taking up or down existing steel water tubing and connections, 20 mm bore for re-fixing or removing from site to store for reuse or credit, including taking down standard fittings, complete all as specified and directed.

Supply and fixing galvanized steel water tubes 20 mm bore, medium grade, with all standard fittings such as bends, elbows, tees etc, concealed/on surface, fixed to walls and ceiling or laid in floors, complete all as specified and directed.

Supply and fixing cast iron bends 100mm bore, diminishing pieces or tapers ISI marked, as in repairs, complete all as specified and directed.

Supply and fixing 100 mm dia bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, as in repairs, complete all as specified.

Supply and fixing in repairs 75 mm cast iron floor trap,ISI marked, with mild steel CP grating including jointing to waste pipe, and set in cement concrete 1:2:4 as required, complete all as specified and directed.

Supply and fixing in repairs 75 mm cast iron nahani trap,ISI marked, with mild steel CP grating including jointing to waste pipe, and set in cement concrete 1:2:4 as required, complete all as specified and directed.

Supply and fixing in repairs 100 mm cast iron floor trap,ISI marked, with mild steel CP grating including jointing to waste pipe, and set in cement concrete 1:2:4 as required, complete all as specified and directed.

Supply and fixed in repair, angle stop valves, cast copper alloy, screwed down high pressure, fancy type with capstan head, chromium plated, screwed both ends for iron pipe or for unions, or for brass ferrule 15 mm bore, complete all as specified and directed.

Supply and fixing in repairs PVC connection 15 mm size of length 450 mm with PTMT nuts, complete all as specified and directed.

Supply and fixing 10 litre capacity virgin polypropylene (PVC) low level flushing cistern, ISI marked, white or coloured, valve less symphonic action type, with inlet, ball valve, float and handle, complete including PVC bend/ flush pipe, brackets and making all connections, fixed as in repairs and removal of old from site to store for reuse or credit, complete all as specified and dire

Supply and fixing in repair, vitereous china counter top (self rimming) wash hand basin, white in colour of size 630mm x 500mm including circular cutting and tucked in granite slab, including 15mm dia cast copper alloy chromium plated fancy type single lever basin mixer, 32mm dia brass CP waste fitting and connection to waste pipe and water pipe, complete all as specified and directed. Make: Hindware, Model : RHAPSODY, Cat No : 10045 or equivalent in Cera.

Supply and fixing in repairs brass chromium plated towel rail 600mm long (between flanges ) 20mm dia 'D' type , fixed to walls with screw and plastic cleats, complete all as specified and directed

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for, in ground floor, Ist floor, in isolated wall/windows, chajjas, balconies, precast cover slab etc and removing rubbish out sie MoD land, complete all as specified and directed.

Material and labour for RCC nominal mix (1:2:4), type B-1, using 20 mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like , complete all as specified and directed.

Material & labour for RCC (1:1.5:3) type A-1, using 20mm graded stone aggregate, as in chajjas, fins, louvers, roof projections, beam and lintel after removing loose concrete and preparation of roof surfaces by application of de-rusting chemical such as Dr fixit rust remover or equivalent and welding additional main bars/ distribution bars if found necessary by inserting to adequate depth in beam by drilling, pinning reinforcement old bars/new with including necessary sacafolding and form work as required upto the height 3.5 mtr, complete all as specified and directed. Note:- 1. Rates shall be deemed to include the cost for necessary scafolding etc. 2. Reinforcement will measured and paid separately. 3. Nitozinc primer (FOSROC or equivalent) @ 200ml per Sqm surface area of concrete will be paid in saparate item.

Material & labour for RCC (1:1.5:3) type A-1, using 20mm graded stone aggregate, as in chajjas, fins, louvers, roof projections, beam and lintel after removing loose concrete and preparation of roof surfaces by application of de-rusting chemical such as Dr fixit rust remover or equivalent and welding additional main bars/ distribution bars if found necessary by inserting to adequate depth in beam by drilling, pinning reinforcement old bars/new with including necessary sacafolding and form work as required upto the height exceeding 3.5 mtr and upto height of 7.50 mtr, complete all as specified and directed. Note:- 1. Rates shall be deemed to include the cost for necessary scafolding etc. 2. Reinforcement will measured and paid separately. 3. Nitozinc primer (FOSROC or equivalent) @ 200ml per Sqm surface area of concrete will be paid in saparate item.

Material and labour for TMT steel bars, 8 mm dia and over , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Supply only nitozinc anti crrosion primer of M/s FOSROC or equivalent as approved by GE, complete all as specified and as directed.

Cutting holes into or through brick/concrete walls built in cement mortar exceeding 150 Sqcm but not exceeding 400 Sqcm in superficial area and making good in cement mortar 1:3 to match with the existing finishes, complete all as specified and directed.

Material and labour for formwork for flat fair finished surfaces of concrete to sides and soffits of lintels, cantilevers, shelves including supports, overhangs, etc also splay between floors and beam, complete all as specified and directed.

Material & labour for Cleaning and preparation of roof/junction/crumple joints surfaces of RCC/Bricks tiles/Cement concrete and made free from dirt, foreign particles, laitance, followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surfaces caused by thermal expansion/ contraciton at junction/crumple joint. Cutting the "V" grooves with suitable cutter machine and filling with Repair Mortar/General Purpose Grout in the proportions as recommended by manufacturer, as per the requirement, making of gollas at all perimeter/corners/ crumple joints with Polymer Modified Mortar ( Cement : Sand 1:4 with 5% Acylic polymer by weight of cement), complete all as specified and directed. Make- SIKA/FOSROC/Asian Paints/Berger.

Material & labour for Cleaning and preparation of roof (RCC/Brick tiles/Cement concrete) surfaces and made free of dirt, foreign particles, laitance, followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expansion/contraction, and repairing the cracks after making “V” groove with suitable cutter machine, filled with Repair Morter/General Purpose Grout in the proportions as recommended by manufacturer, supplying and applying High performance Hybrid Polyurea waterproofing coating spray/hand applied liquid membrane with following specifications: (a) Elongation of range 400%-600% (b) Tensile strength of 8-12 N/mm2 (c) Crack bridging ability of 3.00- 4.00 mm (d) Hardness (Shore’A’, ASTM D2240) of range 50-70 The application shall include final base preparation, epoxy primer application in rato 1:1 (resin:hardner) with 100% water dilution and application of Hybrid ployurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50 mm. The application/treatment shall be carried out by authorised rep of approved specialist firm/manufacturer. Make- SIKA/FOSROC/Asian Paints/Berger. Note:- The defect liability period of water proofing treatment to RCC roof slab including sunken floors shall be 10 years and the contractor shall be responsible to keep the entire building(s) free from leakage/seepage for a period of 10 years after certified date of completion. The contractor may obtain a similar guarantee from the specialist firm engaged by him for the purpose.

All as per item No 1.79 here-in-before but on vertical surfaces, complete all as specified and directed.

Supply and fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, staging etc. and removal of rubbish outside MOD land, complete all as specified and directed.

Material and labourfor brickwork with using subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.

Material and labour for brickwork in half brick thick wall using subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4), complete all as specified and directed.

Dismantling existing water tanks of size exc 250 Litre but n.exc 500 litre capacity and removal from site to store for reuse or credit, complete all as specified and directed.

Dismantling existing water tanks of size exc 500 Litre but n.exc 1000 litre capacity and removal from site to store for reuse or credit, complete all as specified and directed.

Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500 litres capacity ‘triple layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed.

Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 1000 litres capacity ‘triple layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed.

Supply and fixing in repairs 20 mm ball valves (Minimum weight 210 gms) high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

Supply and fixing 110 mm PVC (SWR) pipes double socketed in any length with rubber ring joints, fixed to wall with suitable size of mild steel clamps and screws, including making good mouth of rain water pipe in cement mortar 1:3 or PCC 1:2:4 complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius with rubber rings, fixed to walls with suitable clamps as in rain water pipes of 110mm bore complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over and including a coat of pink primer, on new wooden surfaces over 10cm width or girth, including preparation of wooden surface, complete all as specified and directed.

Material and labourfor applying two coats of synthetic enamel paint on new already primed steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed.

Material and labour, applying two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed.

Material and labour for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections as approved, of approved make, conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM, rubber/ neoprene gasket etc. Aluminium sections shall be smooth, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed. Note:- Weigth of Aluminium section only shall be payable and the cost of other accessories mentioned in the description shall be deemed to be included in the quoted rate of this item.

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required, with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge., complete all as specified and as directed. Note:- Weigth of Aluminium section only shall be payable and the cost of other accessories mentioned in the description shall be deemed to be included in the quoted rate of this item.

Material and labour for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge, complete all as specified and directed.

Supply and fixing Door closer aluminium die cast body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed , complete all as specified and directed.

Supply and fixing Aluminium Mortice lock 4 levers, vertical type, size 100 mm, complete all as specified and directed.

Supply and fixing 12mm thick Veneered particle board, interior grade, solid core, medium density general purposes type with commercial face veneers type 'BB' complete all as specified and directed.

Material and labour for 5.5 mm thick Sheet glass, ordinary quality in squares not exceeding 0.5 Sq. M in each pane, complete all as specified and directed.

Dismantling (corrugated, semicorrugated etc) asbestos sheets in roof coverings, complete all as specified and directed.

Supply and Fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, of any colour (as approved by GE), having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Material and labour for mild steel as in framed work of doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing similar work conforming to Fe-290 Grade E-165,ncluding mild steel flat iron as in hold fast including cuting holes for inserting hold fast and PCC 1:2:4 type B-1 using 20 mm graded stone aggregateas in bed block of size 150mm x230 or 115 mm x 75 mm (06 Nos in each door )complete all as specified and directed

Supply and fixing roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. with rolled mild steel FE-290 Gde E-165, complete all as specified and directed.

Dismantiling structural steel work including doors, gates, railings, etc but excluding framed truss etc complete all as specified and directed. .

Dismantiling wall and ceiling boards of any descreption/ thickness including cover fillets, complete all as specified and directed.

Dismantiling wall and ceiling boards of any descreption/ thickness including cover fillets and ceiling frame of any description, complete all as specified and directed.

Supply and fixing anodised aluminium snap grid frame work 605 mm x 605 mm for false ceiling and hangers 6 mm dia GI (upto 1200 mm length) with level adjusting mechanism, fixed to roof slabs by means of ceilling cleats made out of GI flat 40 mm x 3 mm, 60 mm long and expansion hold fasteners 12.5 mm dia 40mm long, complete all as specified and directed.

Supply and fixing Perforated particle board/ tiles 12 mm thick for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid, complete all as specified and directed.

INTERNAL ELECRIFICATION WORK

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including GI earth wire on batten or in PVC conduit or in MS Conduit including fixtures and fittings such as switches, ceiling roses, pendants, fan regulators, sockets etc, removing materials to store for keeping in safe custody for reuse or for credit (credit for above items shall be made as per conditions separately) and making good disturbed surface of walls, floors, etc., complete all as specified and directed.

Material and labour for point wiring with single core multi stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed FRLS colour code cable of 1100 volts grade drawn through and including non metalic rigid PVC conduit medium duty of suitable size with all standard fittings such as Tee junction, bends etc, concealed in wall/fixed on ceiling including including modular cover plate and boxes for housing switches, fan regulators etc, including 1.5 Sqmm (nominal area) multi stranded copper conductor PVC insulated unsheathed FRLS colour code cable of 1100 volts grade for earth continuity, as for one light/exhaust fan/bell point or fan point (through regulator), controlled by one switch, complete all as specified and directed. Note(s) : (i) Rate quoted shall be deemed to include cutting chases for concealing conduit and making good in cement mortar (1:4) or PCC (1:2:4) as required. (ii). Switches and fan regulator etc., shall be measured and paid separately.

All as per item No 3.02 here-in-before but for 3/5 pin socket outlet 6 Amps multipurpose on independent board.

All as per item No 3.02 here-in-before but for 2/3 pin socket outlet 6 Amps on same board with other switches.

All as per item No 3.02 above but with 2.5 sqmm cable insulated for 3 pin 15 amp multipurpose socket outlet including 2.5 sqmm PVC insulated copper wire for earth continuity on independent board.

Supply and fixing switch modular type, single pole, one module, 6 Amps, 230volts, complete all as specified and directed.

Supply and fixing switch modular type, single pole, one module, 16 Amps, 230volts, complete all as specified and directed.

Supply and fixing modular socket outlet, 2/3 pins combined, 6 Amps, 2 module, 230 volts, complete all as specified and directed.

Supply and fixing modular socket outlet, 2/3 pin combined , 6/16 Amps, 2 module, 230 volts, complete all as specified and directed.

Supply and fixing ceiling rose, surface bakelite, polycarbonate / PVC isolated body, 65mmx50mm, two to three terminals, (ISI marked), complete all as specified and directed.

Supply and fixing modular type fan regulator, step type (4/5 steps),120 W, two module, suitable for 1200/1400 mm sweep ceiling fans including necessary connections, complete all as specified and directed.

Material and labour for Sub Main Wiring (in replacement) with four single core 10 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed colour code cables, drawn in and including non-metalic rigid PVC conduit, heavy duty of 25 mm dia, including standard fittings such as Tees, junction, bands etc., conduit concealed in wall & fixed on ceiling with suitable clamps with and including one run of continuous multi stranded copper conductor 10 Sqmm (nominal area) FRLS PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note(s): (i) Four runs of 10 Sqmm main cable + one run of 10 Sqmm cable for earth continuity and PVC conduit shall be measured as one unit/one Running Metre. (ii) Rate quoted shall be deemed to include cutting chases for concealing conduit and making good in cement mortar (1:4) or PCC (1:2:4) as required.

Material and labour for Sub Main Wiring (in replacement) with two single core 4 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed colour code cables, drawn in and including non-metalic rigid PVC conduit, heavy duty of 25 mm dia, including standard fittings such as Tees, junction, bands etc., conduit concealed in wall & fixed on ceiling with suitable clamps with and including one run of continuous multi stranded copper conductor 4 Sqmm (nominal area) FRLS PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note(s): (i) Two runs of 4 Sqmm main cable + one run of 4 Sqmm cable for earth continuity and PVC conduit shall be measured as one unit/one Running Metre. (ii) Rate quoted shall be deemed to include cutting chases for concealing conduit and making good in cement mortar (1:4) or PCC (1:2:4) as required.

Material and labour for Sub Main Wiring (in replacement) with two single core 6 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed colour code cables, drawn in and including non-metalic rigid PVC conduit, heavy duty of 25 mm dia, including standard fittings such as Tees, junction, bands etc., conduit concealed in wall & fixed on ceiling with suitable clamps with and including one run of continuous multi stranded copper conductor 6 Sqmm (nominal area) FRLS PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note(s): (i) Two runs of 6 Sqmm main cable + one run of 6 Sqmm cable for earth continuity and PVC conduit shall be measured as one unit/one Running Metre. (ii) Rate quoted shall be deemed to include cutting chases for concealing conduit and making good in cement mortar (1:4) or PCC (1:2:4) as required.

Supply and fixing in replacement sheet metal enclosure DB for Incoming MCCB, TPN 415 volt 6 ways with 200 Amp bus bar with IP43 protection and outgoing MCBs factory made double door, with 200 Amp bus bar complete in all aspects all as specified and directed .

Supply and fixing in replacement sheet metal enclosure, SPN, with a two pin socket and earth plug, with one MCB double pole & earth, 240 Volts, 32 Amps, 'B' curve, 10 KA, complete all as specified and directed

Supply and fixing in replacement MCBs Distribution board sheet metal enclosures, SPN 240 Volts, 04 ways with 200 amps rated bus bar, double door, with IP 43 protection, complete all as specified and directed.

Supply and fixing in replacement MCBs Distribution board sheet metal enclosures, SPN 240 Volts, 08 ways with 200 amps rated bus bar, double door, with IP 43 protection, complete all as specified and directed.

Supply and fixing in replacement MCCB 4 pole 100 Amps, 415 volts, thermal and fixed magnetic setting Ics=100% of Icu, conforming to IS/IEC:60497-2, complete all as specified and directed.

Supply and fixing in replacement MCB SP 06 to 32 Amps, 240volts, 'B' curve/ series, 10 KA, complete all as specified and directed.

Supply and fixing in replacement MCB SPN 40 to 63 Amps , 240 volts, 10 KA, 'C' curve/ series, complete all as specified and directed.

Supply and fixing in replacement MCB SP 63 Amps , 240 volts, 10 KA, 'C' curve/ series, complete all as specified and directed.

Supply and fixing in replacement LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. complete all as specified and directed.

Taking down and refixing LED tube light fittings after carrying out necessary repairs to wiring, connections, other minor defects etc, complete all as specified and directed.

Taking down and refixing LED 35/42 W light fittings after carrying out necessary repairs to wiring, connections, other minor defects etc including replacement of LED driver, complete all as specified and directed.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed .

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed

Supply and fixing in replacement LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Material and Labour for painting ceiling fans 1200/1400 mm sweep after taking down, with synthetic enamel paint by spraying, including filling cavities with fillter after cleaning all dust etc, re-writing the MES number in black paint in appropriate size and shape and refixing the same in position after painting, complete all as specified and directed.

Supply and fixing PVC non metallic rigid concealed conduit 32 mm, medium grade inclusive of junctions, bends, elbows, tees, reducers, bell mouth tube ends fixing accessories such as couplers lock nuts, saddles, pipe hooks etc including cutting chases for conduits, complete all as specified and directed.

Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completeall as specified and directed .

Note: The Total amount shall subject to adjustment of credit of Rs. 67,685.00 for old Materials as per Schedule of Credit.

M/S MATLOOB AHMED

Baba Engineers and Contractors

KRISHAN KUMAR CONTRACTOR