Repairs and facelift GMO Clt

Amount

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge.

a) With cement mortar 1:4 (1cement: 4 M sand).

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

a) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

a) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

a) 10 litre capacity - White

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

a) Circular shape 450 mm dia.

b) Rectangular shape 453x357 mm

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:

a) 15 mm nominal bore.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

a) 15 mm nominal bore.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

a) 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

a) 15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :

a) 15mm nominal bore

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

a) 15 mm nominal bore with 30 cm length.

a) 15 mm nominal bore with 45 cm length.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

a) Flexible pipe

i) 32 mm dia

ii)40 mm dia

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

a) One or more coats on old work

b) Two or more coats on old work.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

a) One or more coats on old work.

Erection of four legged ground based ( light weight) 40 m high communication tower after segregation/sorting of the tower materials as per erection drawings Tower materials will be supplied free of cost at specified place and transportation will be paid as per item No.22.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :

a) Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.

Melamine polishing on wood work (one or more coat).

Renewing glass panes, with wooden fillets wherever necessary:

a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

a) 25 mm nominal outer dia .Pipes.

b) 20 mm nominal outer dia. Pipes.

Repairs/Easening of wooden panelled door shutters of area up to 2 Sq.m including replacing hinges if necessary if found necessary etc. complete.

Repairs/'Easening of wooden glazed window/cup board shutters of area up to 1 Sq.m including necessary repairs to styles, renewing the fillets and providing necessary hooks if found necessary etc. complete.

Removal and refixing of aluminium windows including providing 75 mm size aluminium Hinges along with stay.The rate is inclusive of making necessary cuttings wherever required and replacing with new rubber gaskets alround the glass portions etc complete as directed by the Engineer Incharge.

Repairs to aluminium shutters including removing and refixing in position with new aluminium hinges of size 100 mm etc complete as directed by the Engineer incharge.

Repairs to aluminium shutters including removing and refixing in position with new aluminium hinges of size 100 mm and providing pivot and aluminium Handle etc complete as directed by the Engineer incharge.

Replacing the damaged wooden frames of doors and windows, using with best available first class country wood as directed by the Engineer Incharge

SHENITH P K