Loading
Loading…
Loading…
| Sl No | Description | Qty | Unit | SELVAM A L1 | RAJAN K L2 |
|---|---|---|---|---|---|
| 1.00Anganavady Maintenance | |||||
| 1.00 | 50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 0.98 | cum | 6,512.6 ₹6,388.86 Lowest | 6,577.73 ₹6,452.75 |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 30.64 | sqm | 339.63 ₹10,407.96 Lowest | 343.03 ₹10,512.15 |
| 1.00 | OD501380/2025-2026:Filling with Quarry Muck
Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade | 0.8 | cum | 906.44 ₹725.15 Lowest | 915.5 ₹732.4 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.8 | cum | 8,483.41 ₹6,786.73 Lowest | 8,568.24 ₹6,854.59 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 205.69 | kg | 212.12 ₹43,631.39 Lowest | 214.24 ₹44,067.45 |
| 1.01 | OD501279/2025-2026:Providing and fixing precoated galvanised iron profile sheets(size,shape pitch of comigation as approved by Engineer in charge 0.35mm(+0.05%) total coated thicknesswith Zinc coating l20gmsper sqm as per IS -277 in 240mpa steel grade 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns .Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12m or as desired by Engineer in charge . The sheet shall be fixed using self drilling
/self tapping screws of size (5.5x55mm) with EPDM seat,comp1ete upto any pitch in horizontal/verticalor curved surface ,excluding the cost of purlins ,rafters,and trusses and
including cutting to size and shape wherever required. | 24.96 | sqm | 469.86 ₹11,727.71 Lowest | 474.56 ₹11,845.02 |
| 1.01 | OD517428/2025-2026:Supplying and fixing half split PVC gutter 160 mm size with MS flats 200x5 mm size@60 cm
c/c fixing on roof members (purlin or rafters),bolts ,nuts and washers etc.including making
necessary connections with rain water pipes complete | 10.4 | metre | 465.6 ₹4,842.24 Lowest | 470.26 ₹4,890.7 |
Tender Value
₹84,510
EMD Value
₹2,113
Closing Date
19 Mar 2026, 6:00 pmClosed
AE
LID EW PUTHUPPADY GP
CIVIL WORK
2026_LSGD_846247_1
599/2025/AE/LSGD/PDY
Open Tender
Civil Works - Roads
Item Rate
180 days
PUTHUPPADY GP
Please refer Tender documents.
8 documents required · 8 mandatory
₹555
Yes
₹2,113
Yes
16 Oct 2026
11 Mar 2026
23 Mar 2026
11 Mar 2026
19 Mar 2026
11 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Anganavady Maintenance | |||||
| 1.001 | 50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 0.98 | cum | - | - |
| 1.002 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 30.65 | sqm | - | - |
| 1.003 | OD501380/2025-2026:Filling with Quarry Muck
Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade | 0.8 | cum | - | - |
| 1.004 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.8 | cum | - | - |
| 1.005 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 205.69 | kg | - | - |
| 1.006 | OD501279/2025-2026:Providing and fixing precoated galvanised iron profile sheets(size,shape pitch of comigation as approved by Engineer in charge 0.35mm(+0.05%) total coated thicknesswith Zinc coating l20gmsper sqm as per IS -277 in 240mpa steel grade 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns .Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12m or as desired by Engineer in charge . The sheet shall be fixed using self drilling
/self tapping screws of size (5.5x55mm) with EPDM seat,comp1ete upto any pitch in horizontal/verticalor curved surface ,excluding the cost of purlins ,rafters,and trusses and
including cutting to size and shape wherever required. | 24.96 | sqm | - | - |
| 1.007 | OD517428/2025-2026:Supplying and fixing half split PVC gutter 160 mm size with MS flats 200x5 mm size@60 cm
c/c fixing on roof members (purlin or rafters),bolts ,nuts and washers etc.including making
necessary connections with rain water pipes complete | 10.4 | metre | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1429575.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.06 MB
599SBD.pdf
Tender Documents • 1.66 MB
BOQ_1429575.xls
BOQ • 0.22 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .