SPECIAL REPAIRS TO VALLEY GUTTERS AND DOWN TAKE PIPE OF MULLA AQUATIC COMPLEX AND DRILL SHED AT INA EZHIMALA

Amount

Notes for all items of BOQ:- i) All debris, unserviceable items shall be removed from site and thrown away at dumping area inside INA area upto a distance of 3.00 Kms where directed. Loading, unloading, staking and transportation charges are included in relevent items of taking down or demolition / dismantling. ii) The work shall be executed on sloped roof/ flat roof upto a height of 30m. Contractor should ensure the safety of labour and should adhere to the safety precautions while working in elevated places/ roof tops. iii) Contractor need to visit the site before qouting the tender since the work is specialized.

Dismantling of plain or corrugated steel/PVC sheeting of any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in coping, roof kerbs etc complete all as specified and as directed.

S&F GI sheet / plate cut, welded and fixed as in roof covering/ cladding to wall, ridge etc fixed with self tapping screws, rivetting with existing roof sheets/ valley gutters, bolting on to parapet walls etc complete all as specified and as directed at any height. Note:- The quoted rates is deemed to be inclusive of necessary scoffolding also.

S&F MS steel work in tubular sections (circular/square/ rectangular) as in post, trusses, brackets, purlins, rafters, for making frames to fix welded mesh or any MS works as directed etc., conforming to IS 1161-1998 grade St-240 for hollow tubes including necessary welding etc, complete all as specified and as directed. Note:- The quoted rate is deemd to be inclusive of fixing the frames on to walls of any description including drilling, anchor fastening with minimum 100 mm long and 10 mm dia fasteners, concreting if necessary and making good of existing surface and touchups.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F granite finish aluminium composite panel 4mm thick matching with existing granite stone including necessary aluminium supports and fixing arrangements upto a height of 30 mtr complete all as specified and as directed. Note:- Rate of scaffolding/mechanical instruments like cranes to access the site upto 30 mtr height shall be inclusive in the quoted rates and no claim whatsoever is entertained on this account.

Demolition of plain cement concrete of any description and in any position including floor finishes of any description and material complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position including floor finishes of any description and material complete all as specified and as directed.

S&F for 150 mm dia PVC pipes to carry rainwater pipes from GI gutter including all fittings like bends, TEE, elbow, Y etc and necessary clamping and fixing arrangements complete all as specified and as directed by Engr in charge.

S&F for 110 mm dia PVC pipes to carry rainwater pipes from GI gutter including all fittings like bends, TEE, elbow, Y etc and necessary clamping and fixing arrangements complete all as specified and as directed by Engr in charge.

M&L for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on wall complete all as specified, as per manufacturer's instructions and as directed.

M&L for preparation of old treated surfaces and applying one coat of exterior emulsion weather proof Anti-fungal paint on wall including necessary scaffolding all as specified, as per manufacturer's instructions and as directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth upto a height of 9 metres and applying one coat of epoxy paint including necessary scaffolding complete all as specified and as directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets not exc 4kg per sqm complete all as specified and as directed.

S&F PVC COATED GI welded mesh fixed on to MS tubular frame. The GI wire used for making welded mesh shall not be less than 3 mm and the size of mesh opening shall not be more than 50 mm complete all as specified and as directed. Note:- The work shall be done upto a height of 20 mts. Quoted rate is deemed to be inclusive of scaffolding required.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or on the side of waist slab with suitable arrangement complete all as specified and as directed.

SANDR

KDR CONSTRUCTION