Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹2.1 L
Closing Date
30 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Vadodara Division: Electrical works in connection with various works under Plan Heads 16 and 53 at Bayad, Bharuch, Vishwamitri and Palej stations.
BRC-EL-P-13-26-27
BRC-EL-P-13-26-27
Open
Works - General
6 Months
Vadodara, Gujarat
₹0
₹2.1 L
30 Jul 2026
7 Jul 2026
16 Jul 2026
156 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | Below/Par | ||
| — | — | — | 89,62,718 | ||
| — | 256.00 | — | — | ||
| Wiring of light/fan/exhaust fan points in concealed manner with modular accessories - The price shall cover for concealed wiring of light/fan/exhaust fan point with 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with 1.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire with all accessories in concealed type of wiring in medium grade PVC conduit and accessories of Precision/Modi/Prestoplast/Gerard make. The accessories shall be of modular type of C&S/MK/North West/L&T/Crabtree/Siemens/Anchor/Legrand/ Havells/Luminous make. | — | — | — | 1,04,448 | |
| — | 36.00 | — | — | ||
| Providing plug point 6 Amp in concealed manner on existing board with modular accessories - The price shall cover for providing plug point with modular type universal socket and switch, 6 Amp, 230 Volt, AC on existing board in concealed manner. The accessories shall be of modular type of C&S/ MK/North West/L&T/Crabtree/Siemens/Anchor/Legrand/Havells/Luminous make. | — | — | — | 3,492 | |
| — | 4.00 | — | — | ||
| Providing plug point 16 Amp in concealed manner on separate board with modular accessories - The price shall cover for providing power plug point with modular type universal socket and switch, 16 Amp, 230 Volt, AC on separate board with modular accessories in concealed manner. The accessories shall be of modular type of C&S/MK/North West/L&T/Crabtree/Siemens/Anchor/Legrand/ Havells/Luminous make. The price shall also cover for concealed wiring of plug point with 2.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with 1.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire with all accessories in concealed type of wiring in medium grade PVC conduit and accessories of Precision/Modi/Prestoplast/Gerard make. | — | — | — | 1,784 | |
| — | 38.00 | — | — | ||
| Providing board with two switches and two socket, 6 Amps in concealed manner with modular accessories - The price shall cover for providing multi-plug point board (switch, 6 Amp - 2 Nos and universal socket, 6 Amp - 2 Nos) with modular type universal five-pin socket and switch, 6 Amp, 230 Volt, AC with modular accessories in concealed manner. The accessories shall be of modular type of C&S/ MK/North West/L&T/Crabtree/Siemens/Anchor/Legrand/Havells/Luminous make. The price shall also cover for concealed wiring of board with 1.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with 1.0 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire with all accessories in concealed type of wiring in medium grade PVC conduit and accessories of Precision/Modi/ Prestoplast/Gerard make. | — | — | — | 9,006 | |
| — | 40.00 | — | — | ||
| Providing board with four switches and four sockets, 6 Amp in concealed manner with modular accessories - The price shall cover for providing multi-plug point board (switch, 6 Amp - 4 Nos and universal socket, 6 Amp - 4 Nos) with modular type universal five-pin socket and switch, 6 Amp, 230 Volt, AC with modular accessories in concealed manner. The accessories shall be of modular type of C&S/ MK/North West/L&T/Crabtree/Siemens/Anchor/Legrand/Havells/Luminous make. The price shall also cover for concealed wiring of board with 1.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with 1.0 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire with all accessories in concealed type of wiring in medium grade PVC conduit and accessories of Precision/Modi/ Prestoplast/Gerard make. | — | — | — | 18,040 | |
| — | 560.00 | — | — | ||
| Concealed wiring of sub-main with 2.5 sq. mm in PVC conduit - The price shall cover for concealed wiring of sub main with two-wire single core 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and one wire of 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in concealed manner as per site requirement in PVC conduit. | — | — | — | 49,840 | |
| — | 440.00 | — | — | ||
| Concealed wiring of sub-main with 2.5 sq. mm copper wire, single-core in existing PVC conduit - The price shall cover for wiring of two wire sub-main with 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in existing PVC casing-capping or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions. | — | — | — | 33,440 | |
| — | 304.00 | — | — | ||
| Concealed wiring of sub-main with 4.0 sq. mm in PVC conduit - The price shall cover for concealed wiring of sub main with two-wire single core 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and one wire of 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in concealed manner as per site requirement in PVC conduit. | — | — | — | 33,136 | |
| — | 260.00 | — | — | ||
| Concealed wiring of sub-main with 4.0 sq. mm copper wire, single-core in existing PVC conduit - The price shall cover for wiring of two wire sub-main with 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in existing PVC casing-capping or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions. | — | — | — | 24,440 | |
| — | 300.00 | — | — | ||
| Concealed wiring of sub-main with 6.0 sq. mm in PVC conduit - The price shall cover for concealed wiring of sub main with two-wire single core 6.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and one wire of 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in concealed manner as per site requirement in PVC conduit. | — | — | — | 49,500 | |
| — | 256.00 | — | — | ||
| Concealed wiring of sub-main with 6.0 sq. mm copper wire, single-core in existing PVC conduit - The price shall cover for wiring of two wire sub-main with 6.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in existing PVC casing-capping or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions. | — | — | — | 32,768 | |
| — | 128.00 | — | — | ||
| Wiring of light/fan/exhaust fan points in PVC casing-capping/conduit - The price shall cover for wiring of light/fan/exhaust fan point with 1.5 sq. mm, multi-stranded, PVC insulated, unsheathed FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to relevant and latest IS and 1.0 sq. mm, single-core, multi-stranded, PVC insulated, unsheathed FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to relevant and latest IS in medium grade PVC casing-capping double lock type, ISI marked of make Modi/Precision/Gerard/Prestoplast or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions with surface mounted molded polypropylene switch board with modular cover plate of suitable size including switches/angular holders/ceiling rose. Space shall be kept on board to accommodate modular electronic fan regulator. Molded polypropylene switch board shall be as per IS: 14772. The accessories shall be of modular type of C&S/MK/ North West/L&T/Crabtree/Siemens/Anchor/Legrand/Havells/Luminous make. | — | — | — | 46,720 | |
| — | 6.00 | — | — | ||
| Providing board with two switches and two sockets, 6 Amp - The price shall cover for wiring of multi-plug point (switch, 6 Amp, 230 Volt AC, 50 Hz - 2 Nos and socket, 6 Amp, 6 Amp, 230 Volt AC, 50 Hz - 2 Nos) on separate surface mounted polypropylene switch board with modular cover plate of suitable module with 1.5 sq. mm multi-stranded, PVC insulated, unsheathed FRLS copper conductor and 1.0 sq. mm multi-stranded, PVC insulated, unsheathed FRLS copper conductor in green colour as earthing wire of 1100 Volt grade, ISI marked, conforming to relevant and latest IS in medium grade PVC casing capping double lock type, ISI marked, make Modi/Precision/Gerard/Prestoplast or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/ Modi/Gerard as per site conditions at an approximate distance up to 3.0 meter or as per site requirement. The accessories shall be of modular type of C&S/MK/North West/L&T/Crabtree/Siemens/Anchor/Legrand/Havells/Luminous make. Molded polypropylene switch board shall be as per IS: 14772. | — | — | — | 1,452 | |
| — | 44.00 | — | — | ||
| Providing electronic fan regulator, modular type - The price shall cover for supply, fixing, testing and commissioning of hum-free modular type electronic fan regulator suitable for 80/100-Watt ceiling fan of step type with 'OFF' position, surface/flush type on existing board and its connection from existing supply. Miniature switch type regulators shall not be accepted. The regulator shall be of Anchor-Roma/Cona/ Leader/Crabtree/Legrand/C&S/HPL/Indo Asian/Havells/Standard/Bentec/Elleys/Precision make. | — | — | — | 12,276 | |
| — | 50.00 | — | — | ||
| Wiring of sub-main with copper wire, single-core, 2.5 sq. mm in casing-capping/conduit - The price shall cover for wiring of two wire sub- main with 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in medium grade PVC casing capping of not less than 25 mm size, double lock type, ISI marked of make Prestoplast/Precision/Modi/Gerard or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions. | — | — | — | 5,550 | |
| — | 250.00 | — | — | ||
| Wiring of sub-main with copper wire, single-core, 4.0 sq. mm - 5 Nos and 2.5 sq. mm - 1 No in PVC conduit/casing-capping with junction box - The price shall cover for wiring of five wire sub-main with 4.0 sq mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with five wires of 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and one wire of 2.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in green colour as earthing wire in medium grade PVC casing capping of not less than 25 mm size, double lock type, ISI marked of make Prestoplast/Precision/Modi/ Gerard or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/ Precision/Modi/Gerard with heavy duty PVC junction box as per site conditions. | — | — | — | 47,250 | |
| — | 12.00 | — | — | ||
| Providing PVC junction box with eight-way connector - The price shall cover for supply and fixing of PVC junction box with eight way connector of reputed make and quality, ISI marked in existing sub-main and its connection from existing sub-main with 1.5 sq. mm multi-stranded, PVC insulated, unsheathed FRLS copper conductor and 1.0 sq. mm multi-stranded, PVC insulated, unsheathed FRLS copper conductor in green colour as earthing wire of 1100 Volt grade, ISI marked, conforming to relevant and latest IS. | — | — | — | 6,312 | |
| — | 44.00 | — | — | ||
| Fixing, testing and commissioning of ceiling fan - The price shall cover for fixing, testing and commissioning of ceiling fan on existing hook and its connection by FRPVC insulated, flexible copper cord, 1100 Volt grade, 24/0.20mm from existing ceiling rose with earth connection. A suitable suspension clamp made from G.I. flat of 40 x 6 mm with MS 'S' shaped hook of diameter not less than 10 mm shall be provided as per site requirement if fan hook is not available and is included in the scope of work. The ceiling fans shall be supplied by railways at site in-charge's office/store. | — | — | — | 7,612 | |
| — | 30.00 | — | — | ||
| Supply, fixing, testing and commissioning of BLDC ceiling fan, decorative type with three blades - The price shall cover for supply of Brushless DC ceiling fan of 1400 mm sweep confirming to IS: 374 (2019) latest complete with top and bottom canopies, 300/600/900 mm down rod, shackles, nuts, bolts, clamps and all other accessories as per site requirement. The fan shall be supplied with remote control unit and shall be ISI marked and of reputed make of ATOMBERG/HAVELLS/ORIENT/CROMPTON/USHA or any other make approved by Sr. DEE (Power) Vadodara confirming to the IS mentioned above. The price shall also cover for fixing, testing and commissioning of ceiling fan on existing hook and its connection by FRPVC insulated, flexible copper cord, 1100 Volt grade, 24/0.20 mm from existing ceiling rose with earth connection. A suitable suspension clamp made from G.I. flat of 40 x 6 mm with MS 'S' shaped hook of diameter not less than 10 mm shall be provided as per site requirement if fan hook is not available and this is included in the scope of work. The colour of the BLDC fan shall be in sync with the room ambience and shall be got approved from site engineer before supply. | — | — | — | 96,780 | |
| — | 36.00 | — | — | ||
| Providing heavy-duty Exhaust fan 300 mm sweep/heavy duty with louver/bird guard - The price shall cover for supply of heavy duty, industrial Exhaust Fan of metal body, 300 mm sweep with bird guard operating on 230 Volt, 50 Hz AC supply complete with all accessories of make Crompton Greaves/ GEC/Almonard/Usha/Bajaj. The price shall also cover for fixing, testing and commissioning of the Exhaust Fan on existing pocket with rake bolts/Anchor fasteners of suitable size as per site condition, and its connection from existing ceiling rose with three-core, 24/0.20 mm size, FRPVC insulated, flexible copper wire of 1100 Volt grade. | — | — | — | 52,596 | |
| — | 17.00 | — | — | ||
| Providing decorative wall bracket fan, 400 mm sweep - The price shall cover for supply of decorative wall mounted bracket fan, 400 mm sweep, operating on 230 Volt, 50 Hz AC supply, oscillating type, 90° swing with three-speed regulator, three aerodynamically balanced blades made of aluminium and base made of MS pipe/plate. The decorative wall bracket shall be of Crompton Greaves/Usha/Orient/Bajaj/ GEC/Almonard make. The price shall also cover for fixing, testing and commissioning of bracket fan on wall by suitable size of MS clamps and its connection from existing socket/supply point as per site requirement. The wall bracket fan shall be got approved from site engineer before supply. | — | — | — | 32,674 | |
| — | 12.00 | — | — | ||
| Providing energy efficient, BLDC pedestal fan, 400 mm sweep - The price shall cover for supply of energy efficient, BLDC pedestal fan, 400 mm sweep, operating on 230 Volt, 50 Hz AC supply. The pedestal fan should offer high air delivery (75 CMM), speed of 1500 RPM, low noise level ( 57dB) and aerodynamically balanced blades. The fan should be supplied with IR remote control for effortless control, allowing to adjust speed, activate boost mode, set timers, enable sleep mode with a single click or enable oscillation/swing mode. The remote control shall be universal across all the pedestal fans and not needed to be paired, allowing easy operation. The fan should feature 90 degree swing (controlled by remote control/button) to ensure higher coverage across the room. Additionally, it should be manually tilted up to 30 degree allowing directing the airflow precisely for maximum comfort. The pedestal fan shall be of ATOMBERG/HAVELLS/ORIENT/CROMPTON/USHA or any other make approved by Sr. DEE (Power) Vadodara. | — | — | — | 45,552 | |
| — | 12.00 | — | — | ||
| Providing MCB and starter with three-pin plug point for Air Conditioner unit in concealed manner with modular accessories - The price shall cover for supply, erection, testing and commissioning of power unit for Air Conditioner in enclosure with MCB DP 20/25 Amp, 3 KA breaking capacity, DOL starter of 16 - 25 Amp capacity suitable for 1.5/2.0 TR A.C. unit, one No 16/20/25 Amp socket and three-pin plug top, 16/25 Amp of ANCHOR- ROMA/CRABTREE/NORTH-WEST make with concealed wiring of sub main with two-wire single core 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and one wire of 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire in concealed manner at an approximate distance up to 3 meter as per site requirement in PVC conduit. The enclosure shall be of modular type and its colour of should be in sync with the decor of the room and as decided by site engineer. | — | — | — | 14,292 | |
| — | 120.00 | — | — | ||
| Providing copper piping for suction and discharge lines of Air Conditioner unit - The price shall cover for supply, fixing, testing and commissioning of refrigerant copper piping suitable for R-22, R-134 A, R-407 refrigerant and conforming to IS: 10773/2006 (latest) from indoor unit to outdoor unit. The copper piping shall be insulated with polyurethane foam tubing duly covered with weather protection. The copper refrigerant pipe shall be suitable for bearing 350 PSI pressure and the thickness should be 19 SWG and diameter should be suitable for handling of refrigerant for capacity 3.5 TR of refrigerant quantity without creating any extra pressure due to quantity of refrigerant and as per manufacturer's recommendations. The exposed copper piping shall be suitably concealed as per site requirement. | — | — | — | 39,360 | |
| — | 120.00 | — | — | ||
| Providing four-core, multi-stranded, flexible copper cable, 2.5 sq. mm from indoor to outdoor unit of Split Air Conditioner - The price shall cover for supply, laying, testing and commissioning of PVC insulated, multi-stranded, four-core, copper conductor cable, 2.5 sq. mm, 1100 Volt grade, ISI marked, conforming to IS: 694 or latest. The cable shall be of Johnson/Neocab/Nicco/Finolex/R.R. Kabel/ Asian/Ecotek/L&T/Havells/Polycab/Avocab/APAR make. The cable shall be connected from the indoor and outdoor units of split A.C. along with 8 SWG earth wire in PVC sleeve of good quality for earthing the equipment from existing nearby earth point/electrode. The copper wire and earth wire shall be laid in PVC conduit of suitable size and properly fixed. | — | — | — | 21,120 | |
| — | 120.00 | — | — | ||
| Providing rigid PVC drain pipe - The price shall cover for supply and fixing of rigid uPVC pipe medium grade of required diameter from indoor unit to main drain hole for draining of condensed water from cooling coil (Indoor unit) to main drain discharge point. | — | — | — | 5,040 | |
| — | 12.00 | — | — | ||
| Providing MS stand for outdoor unit of Split Air Conditioner - The price shall cover for fabrication, supply, fixing and commissioning of MS angle frame/stand made from MS angle for outdoor unit of split AC. The size of angle shall be 40 x 40 x 6 mm painted with two coats of red oxide primer and finished with one coat of black enamel paint. The angle stand shall be fixed at site with anchor bolts. Necessary civil works involved are included in the scope of work. | — | — | — | 5,688 | |
| — | 100.00 | — | — | ||
| Supply and laying of flexible copper cable, three-core 1.5 sq mm - The price shall cover for supply and laying of XLPE sheathed and insulated, LTUG cable, three-core, 1.5 sq. mm, stranded Copper conductor, 1100 Volt grade conforming to IS: 7098 Part I (latest), ISI marked of Johnson/Neocab/ Nicco/Finolex/R R Kabel/Asian/Ecotek/L&T/Havells/Polycab/Avocab/APAR make. A copy of test certificate shall be submitted along with the cable. | — | — | — | 9,400 | |
| — | 400.00 | — | — | ||
| Supply and laying of flexible copper cable, three-core 4.0 sq mm - The price shall cover for supply and laying of XLPE sheathed and insulated, LTUG cable, three-core, 4.0 sq. mm, stranded Copper conductor, 1100 Volt grade conforming to IS: 7098 Part I (latest), ISI marked of Johnson/Neocab/ Nicco/Finolex/R R Kabel/Asian/Ecotek/L&T/Havells/Polycab/Avocab/APAR make. A copy of test certificate shall be submitted along with the cable. | — | — | — | 92,400 | |
| — | 5.00 | — | — | ||
| Providing lighting control board with MCB DP, 32 Amp - 1 No, Time Switch, 16 Amp - 1 No and Single-Phase Contactor, 32 Amp - 1 No - The price shall cover for supply, fixing, testing and commissioning of lighting control board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The board shall be equipped with MCB DP, 10 KA breaking capacity, 32 Amp rating - 1 No, Time switch, 16 Amp - 1 No and Single phase contactor of rating 32 Amp - 1 No. The MCB shall be of ABB/L&T/HPL/GE/ MDS/Siemens/BCH/C&S/CGL/Schneider/Havells make, the contactor shall be of L&T/BCH/C&S/CGL/ Schneider/Siemens make and Digital Time Switch "CRONO" of L&T make or similar of Siemens/Minilec make. The board shall be completely wired with multi-stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages. | — | — | — | 21,600 | |
| — | 3.00 | — | — | ||
| Providing Distribution Board with incomer MCB DP, 16/32 Amp - 1 No, RCBO, two-pole, 25 Amp - 1 No and outgoing MCB SP, 6/10/16 Amp - 6 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The DB shall be equipped with incomer MCB DP 16/32 Amp - 1 No, RCBO, two-pole, 30 mA sensitivity, 25 Amp - 1 No and outgoing MCB SP, 6/10/16 Amp - 4 Nos. The MCBs/RCBOs shall be of ABB/L&T/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL/Havells make. The board shall be completely wired with multi- stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages. The Distribution Board shall be suitable for surface/recessed installation. | — | — | — | 15,453 | |
| — | 4.00 | — | — | ||
| Providing Distribution Board with incomer MCB DP, 16/32 Amp - 1 No, RCBO, two-pole, 25 Amp - 1 No and outgoing MCB DP, 6/10/16 Amp - 4 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The DB shall be equipped with incomer MCB DP 16/32 Amp - 1 No, RCBO, two-pole, 30 mA sensitivity, 25 Amp - 1 No and outgoing MCB DP, 6/10/16 Amp - 4 Nos. The MCBs/RCBOs shall be of ABB/L&T/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL/Havells make. The board shall be completely wired with multi- stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages. The Distribution Board shall be suitable for surface/recessed installation. | — | — | — | 21,332 | |
| — | 12.00 | — | — | ||
| Supply, fixing, testing and commissioning of three-phase, 415 Volt, complete with MCCB, three-pole, 63 Amp, heavy duty plug-socket, 63 Amp, MCB DP, 20 Amp and ray roll plug and socket, 20 Amp in MS outdoor type enclosure for pre cooling point - The price shall cover for supply of three- phase power plug and socket as per below mentioned specifications - (i) Three-phase, 415 Volt power plug and five-pin socket, 63 Amp of BCH make, Cat. No. DS6A7A1 or similar model of L&T/SIEMENS/HPL --- 1 No (ii) Single phase, 230 Volt power plug and three-pin socket, 20 Amp of BCH make, Cat. No. MPSEU202 or similar model of L&T/SIEMENS/HPL --- 1No (iii) MCCB, four-pole, 63 Amp, with thermal-magnetic release range 50 - 63 Amp, Ics = 100% Icu having 35 KA breaking capacity and conforming to IS/IEC 60947-2 with adjustable overload and short circuit settings and inbuilt instantaneous protection. The MCCB shall be supplied with spreader terminals and rotary handle. The MCCB shall be of ABB/L&T/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL/ Havells make --- 1 No (iv) MCB DP, 10 KA breaking capacity, 20 Amp of ABB/L&T/HPL/GE/MDS/Siemens/BCH/C&S/CGL/ Schneider/Havells make --- 1 No (v) Outdoor type enclosure fabricated from 18 SWG CRCA sheet steel, powder coated with grey enamel, wall/pillar mounted, dust and vermin proof, water resistant confirming to relevant IS. The enclosure shall fabricated for three-phase, four-wire, 440 Volt AC, 50 Hz supply system. (vi) The enclosure shall be internally wired by suitable size FRPVC insulated, single core flexible copper multi-stranded wires with crimped copper lugs. The price shall also cover for fixing testing and commissioning of the enclosure securely on cover shed pillars/rails/wall with necessary M.S. clamps, nuts, bolts etc. The drawing, design of plug socket, switchgears with make and model shall be got approved from site-engineer before fabrication and supply. | — | — | — | 1,18,776 | |
| — | 1.00 | — | — | ||
| Providing Distribution Board with incomer MCB TPN, 63 Amp - 1 No and outgoing MCB DP, 10/16/32 Amp - 6 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The DB shall be equipped with incomer MCB TPN, 63 Amp - 1 No and outgoing MCB DP, 10/16/32 Amp - 6 Nos. The MCBs shall be of ABB/L&T/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL/Havells make. The board shall be completely wired with multi-stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages. The Distribution Board shall be suitable for surface/recessed installation. | — | — | — | 11,591 | |
| — | 3.00 | — | — | ||
| Providing Distribution Board with incomer MCB TPN, 32 Amp - 1 No and outgoing MCB DP, 16/25/32 Amp - 8 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The DB shall be equipped with incomer MCB TPN, 32 Amp - 1 No and outgoing MCB DP, 16/25/32 Amp - 8 Nos. The MCBs shall be of ABB/L&T/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL/Havells make. The board shall be completely wired with multi-stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages. The Distribution Board shall be suitable for surface/recessed installation. | — | — | — | 36,900 | |
| — | 1.00 | — | — | ||
| Providing Distribution Board with incomer MCB TPN, 63 Amp - 1 No, RCBO, four-pole, 63 Amp - 1 No and outgoing MCB DP, 16/32 Amp - 8 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The DB shall be equipped with incomer MCB TPN, 63 Amp - 1 No, RCBO, four-pole, 30 mA sensitivity, 63 Amp - 1 No and outgoing MCB DP, 16/32 Amp - 8 Nos. The MCBs/RCBOs shall be of ABB/L&T/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL/Havells make. The board shall be completely wired with multi- stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages. The Distribution Board shall be suitable for surface/recessed installation. | — | — | — | 14,629 | |
| — | 9.00 | — | — | ||
| Providing Distribution Board with incomer MCB TPN, 32 Amp - 2 Nos, RCBO, four-pole, 32 Amp - 1 No and outgoing MCB DP, 10/16 Amp - 8 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated, double door, MCB distribution board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The DB shall be equipped with incomer MCB TPN, 32 Amp - 2 Nos, RCBO, four-pole, 30 mA sensitivity, 32 Amp - 1 No and outgoing MCB DP, 10/16 Amp - 8 Nos. The MCBs/RCBOs shall be of ABB/L&T/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL/Havells make. The board shall be completely wired with multi- stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages. The Distribution Board shall be suitable for surface/recessed installation. | — | — | — | 1,77,849 | |
| — | 1.00 | — | — | ||
| Providing auto changeover panel, 40 Amp capacity with three incoming supplies and one outgoing supply in SS enclosure - The price shall cover for design, fabrication, supply, installation, testing and commissioning of auto changeover panel with three incoming and one outgoing supplies fabricated from 18 SWG CRCA sheet steel, powder coated with grey enamel, wall mounted, dust and vermin proof with locking arrangement confirming to relevant IS and complete with MCBs, contactors, relays, indication lamps etc. The auto changeover panel shall be of two-pole, 40 Amp capacity. The auto change over panel shall be utilized for changeover of supply from any of the three sources to select one source. The auto change over panel shall be provided with four numbers of multi LED indication lamps with control fuses for the three incoming and one outgoing supplies for indication. The incoming supplies shall be (i) DG Set Supply, (ii) Local Supply and (iii) Traction Supply (ATS). The outgoing supply shall be used for UTS (Unreserved Ticketing System). Normally, the local supply shall be the prime source. If local supply fails, then DG Set supply shall be selected. If both local and DG Set supplies fail then Traction supply shall be selected. On restoration of local supply, the entire load of UTS shall be automatically switched over to local supply. The changeover panel shall be consist of - (a) Incoming - MCB DP, 10 KA breaking capacity, 40 Amp of ABB/L&T/HPL/GE/MDS/Siemens/BCH/ C&S/CGL/Schneider/Havells make --- 3 Nos (b) Outgoing - MCB DP, 10 KA breaking capacity, 40 Amp of ABB/L&T/HPL/GE/MDS/Siemens/BCH/ C&S/CGL/Schneider/Havells make --- 1 No (c) Single phase contactor of rating 40 Amp and relays as required for smooth and trouble free operation of the auto changeover panel. The contactors and relays shall be of L&T/BCH/C&S/CGL/Schneider/ Siemens make. Laminated circuit diagram shall be pasted on inside panel cover. The connection to the changeover panel terminals shall be given through PVC insulated, FRLS, flexible, multi-strength, single core, copper conductor of suitable size through the MCBs. The drawing and design of the panel shall be submitted by the contractor and got approved by site engineer before fabrication. | — | — | — | 36,995 | |
| — | 2.00 | — | — | ||
| Providing Distribution Panel, outdoor type, double-door, wall/floor mounted with incomer MCCB, four-pole, 125 Amp - 2 Nos and outgoing MCCB, four-pole, 63 Amp - 6 Nos, MCB, TPN, 32 Amp - 6 Nos with multifunctional energy meter, indication lamp, earthing terminals and all accessories - The price shall cover for fabrication, supply, fixing, testing and commissioning of outdoor type LT distribution board fabricated from 18 SWG CRCA sheet steel, powder coated with grey enamel, double door, floor mounted, dust and vermin proof, water resistant, outdoor type confirming to relevant IS and complete with MCCBs and MCBs. The board shall fabricated for three-phase, four-wire, 440 Volt AC, 50 Hz supply system and shall consist of the following switchgears/ accessories - (a) Incomer - MCCB, four-pole, 125 Amp, with thermal-magnetic release range 100 - 125 Amp, Ics = 100% Icu having 35 KA breaking capacity and conforming to IS/IEC 60947-2 with adjustable overload and short circuit settings and inbuilt instantaneous protection. The MCCB shall be supplied with spreader terminals and rotary handle. The MCCB shall be of ABB/L&T/GE/MDS/Siemens/BCH/C&S/HPL/Schneider/ Havells make --- 2 Nos (b) Outgoing - MCCB, four-pole, 63 Amp, with thermal-magnetic release range 50 - 63 Amp, Ics = 100% Icu having 35 KA breaking capacity and conforming to IS/IEC 60947-2 with adjustable overload and short circuit settings and inbuilt instantaneous protection. The MCCB shall be supplied with spreader terminals and rotary handle. The MCCB shall be of ABB/L&T/GE/MDS/Siemens/BCH/C&S/HPL/Schneider/Havells make --- 6 Nos MCB TPN, 10 KA breaking capacity, 32 Amp of ABB/L&T/GE/MDS/Siemens/BCH/C&S/HPL/ Schneider/CGL/Havells make ---- 6 Nos (c) Digital multifunction meter for measurement of Voltage, Current, Frequency, KW, PF, KVAR, KVA, KVAH, KWH, KVARH with required capacity of CT. The multifunctional meter shall be of L&T/Siemens/ Schneider/HPL/Secure Meters Ltd/Anchor/Panasonic/El measure make --- 1 No (d) Bus bar for main circuit and neutral shall have uniform cross section and made from electrolytic tinned copper as per relevant standards with colour coded, heat shrinkable, PVC insulated and having current density of 1.6 Amp/ sq. mm cross sectional area --- 1 set (e) Multi LED type indication lamp for three-phases (Red, Yellow and Blue) with protection fuses -- - 1 Set (f) Cable glands of required sizes --- LOT (g) Two earth terminals of 12 mm diameter G.I. nut/bolt with washers shall be provided in the LT panel and all sheet steel section shall be electrically connected with a separate G.I. earth strip of 50 x 6 mm size across the panel at bottom. (h) Metallic Caution Board in three languages riveted to the panel board --- 2 Nos | — | — | — | 2,51,726 | |
| — | 1.00 | — | — | ||
| Providing Distribution Board, double-door, wall/floor mounted with incomer MCCB, four-pole, 250 Amp - 1 No and outgoing MCCB, four-pole, 200 Amp - 2 Nos, MCCB, four-pole, 125 Amp - 3 Nos and MCCB, four-pole, 63 Amp - 3 Nos with multifunctional energy meter, indication lamp and all accessories - The price shall cover for fabrication, supply, fixing, testing and commissioning of outdoor type LT distribution board fabricated from 18 SWG CRCA sheet steel, powder coated with grey enamel, double door, floor mounted, dust and vermin proof, water resistant, outdoor type confirming to relevant IS and complete with MCCBs and MCBs. The board shall fabricated for three-phase, four-wire, 440 Volt AC, 50 Hz supply system and shall consist of the switchgears/accessories as given in the detailed technical specifications in Annexure-XXI of tender document. | — | — | — | 1,43,263 | |
| — | 2.00 | — | — | ||
| Providing online UPS, 2.0 KVA cap with 120 minutes backup - Supply, fixing, testing and commissioning of Online UPS, 3.0 KVA capacity with isolation transformer and 120 minutes backup complete with all accessories, IGBT PWM based system suitable for single phase, 230 Volt 50 Hz AC input and single phase 230 Volt, sine wave, 50 Hz AC output, floor mounting type with indicative backup time of 120 minutes with minimum 6400 VAH, SMF VRLA batteries. Specifications are as under - Capacity - 3.0 KVA Input Voltage - 160 - 260 Volt, Single-phase, 50 Hz AC PF - Minimum 0.9 at full load Overall efficiency - 90% at Rated Load Overload capacity - Deliver a minimum overload at 125% for 10 minutes and 150% for 30 seconds. Operating temperature - 0 to 40 deg C Total harmonic distortion - Maximum 3% for linear loads and 5% for non-linear loads Crest factor - 3.1 Noise level - Maximum 55 db Battery - SMF type battery, 42 AH, 12 Volt - 8 Nos Make - HBL/Amara Raja/Exide/CSB/Panasonic/Hitachi/Yuasa Warranty - Minimum five (5) years for UPS and two (2) years for batteries | — | — | — | 1,80,386 | |
| — | 236.00 | — | — | ||
| Supply and erection of M.S. "I" beam of size 150 x 75 mm - The price shall cover for supply and fixing of M.S. "I" beam of size 150 x 75 mm confirming to IS-808, type - MB 150, 4.54 kg/feet in 2.0 meter length. The material is to be supplied at site of work and continuously welded to the rail poles for laying of battery charging cables. | — | — | — | 15,576 | |
| — | 240.00 | — | — | ||
| Fabrication, supply and fixing of outdoor type M.S. box of size 250 mm x 150 mm x 100 mm fabricated from M.S. sheet of 16 SWG thickness with standard angles, channels etc. suitable for housing LED fitting, 12 Watt. The front of the box should be covered with wired mesh - The price shall cover for fabrication, supply and fixing of M.S. Box of size 250 mm x 150 mm x 100 mm fabricated from M.S. Sheet of 16 SWG thickness for housing of LED fitting. The box shall be suitable for outdoor application with standard angles, channels etc. The front of the box shall be covered with SS 202 wire mesh grill. The M.S. box should have hinged opening for access to LED fitting. The complete box should be painted with two coats of red oxide paint and finished with one coat of Siemens grey paint. | — | — | — | 3,75,840 | |
| — | 4.00 | — | — | ||
| Supply, fixing, testing and commissioning of step-down transformer, 3.0 KVA, three-phase, 415/110 Volt AC complete with connection - The price shall cover for supply, erection, testing and commissioning of 5.0 KVA, 440/100-120 Volt, 50 Hz step-down transformer housed in MS box. The step-down transformer shall be suitable for outdoor installation and weather proof design. The transformer should be copper wound with tapping for 110 to 120 Volt on low voltage side. Each tapping shall be provided with MCB TPN, 63 Amp on incoming side and three nos of MCB DP, 40 Amp on outgoing side. Suitable size of MS angle frame shall be provided for erection of the step-down transformer. The step-down transformer shall be of TRIO or any other make approved by Railway. | — | — | — | 39,952 | |
| — | 52.00 | — | — | ||
| Fabrication, supply, fixing and commissioning of 110 Volt battery charging terminals to be mounted on rail poles - The price shall cover for fabrication, supply, fixing and commissioning of 110 Volt battery charging terminals and design shall be as per sample drawing available in Sr. DEE (Power) Vadodara office. Only two cables shall be tapped from the outgoing terminal of the battery charger and looping of the charging terminals should be in alignment. The looping shall take place at the charging terminals only. Cables shall be terminated/looped at the charging terminals with crimped sockets, nuts, bolts, washers etc. and proper capacity of DC MCB shall be provided on positive and negative terminals. The battery charging terminals shall be securely mounted on rail poles. The 110 Volt charging terminals shall be painted with yellow enamel paint. The cable shall be properly clamped to the pipe. 110 Volt DC and symbol for '+' and '-' for identification of polarity shall be painted on the charging terminal. | — | — | — | 66,092 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of battery charging rectifier set for input of 415 Volt, three phase, 50 Hz AC and output 110 to 150 Volt, DC at 200 Amp, cell capacity - 120 AH for TL coaches - The price shall cover for supply, installation, testing and commissioning of battery charging rectifier set for input of 415 Volt, three-phase, 50 Hz AC and output 110 to 150 Volt, DC at 200 Amp, cell capacity 120 AH for TL coaches as per the specifications given in Annexure-XXI of tender document. | — | — | — | 6,77,102 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of three phase, energy efficient, star rated, vertical submersible pump set of capacity 10.0 HP with discharge of approximately 430 LPM at a head of approximately 78 meters at duty point - The price shall cover for supply of energy efficient, star- rated, vertical submersible pump set of capacity 10.0 HP with delivery of approximately 430 LPM at a speed of 2880 RPM and at a total head (inclusive of all losses) of 62 meters (at duty point) for clean drinking water. The pump shall conform to IS: 14220- 1994 or latest and should be guaranteed for the pump discharge for the range of head between -25% and +10% of the specified head. The submersible pump motor shall be continuously rated for operation on 415 Volt, 50 Hz, three-phase AC supply. The motor shall be squirrel cage induction type with winding of 'wet' type and should conform strictly to clause 6.4 of IS: 14220 - 1994 or latest. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/CRI/ Waterman/Uneel/Kirloskar/Jeet/Shakti make. | — | — | — | 90,884 | |
| — | 2.00 | — | — | ||
| Supply installation, testing and commissioning of three phase, energy efficient, star rated, horizontal, mono block submersible pump set of capacity 15.0 HP with discharge of approximately 1000 to 1500 LPM at a head of approximately 36 to 40 meters at duty point - The price shall cover for supply of energy efficient, mono-block, horizontal, submersible, star-rated pump set of capacity 15.0 HP with delivery of approximately 1500 LPM at a speed of 2880 RPM and at a total head (inclusive of all losses) of 40 meters (at duty point) for clean drinking water. The pump shall conform to IS: 14220 - 1994 or latest and should be guaranteed for the pump discharge for the range of head between -25% and +10% of the specified head. The submersible pump motor shall be continuously rated for operation on 415 Volt, 50 Hz, three-phase AC supply. The motor shall be squirrel cage induction type with winding of 'wet' type and should conform strictly to clause 6.4 of IS: 14220- 1994 or latest. The motor should be of adequate capacity to provide pumping discharge within the range of -25% to +10% of specified head. The pump set shall be of Johnson/Falcon/Duke/CGL/KSB/CRI/ Waterman/Uneel/Kirloskar/Jeet/Shakti make. The price shall also cover for installation, testing and commissioning of the pump at the required location with all the associated standard accessories such as uPVC pipe, adaptors, pump guard, inner/outer jig, lowering fixture, non-return valve, sluice valve, H.D. 90° bend, pressure gauge of suitable capacity with siphon, stop cock, bend and coupler, M.S. supporting clamps etc. for successful commissioning of the pump. | — | — | — | 94,266 | |
| — | 90.00 | — | — | ||
| Providing uPVC, non-corrosive, hi-tech, high tensile column pipe of 75 mm diameter - The price shall cover for supply, erection, testing and commissioning of uPVC Column pipe having nominal bore of 75 mm diameter, socket type, heavy grade, non-corrosive, Hi-tech, Hi-tensile of approximate length 3 meters (10 feet) with coupling at one end with square thread, 'O' ring with SS key locking facility. The uPVC pipe shall be of GODAVARI/CAPTAIN/DUKE/JEET/VIVON/FINOLEX/ASHRIVAD/SUPREME/FALCON make. Note - One set of the following accessories shall be supplied by the contractor for maintenance of the pumps, suitable for 75 mm diameter uPVC column pipes - 1. Bottom adapter/connector - 1 No 2. Top adapter/connector- 1 No 3. Pump guard- 2 Nos 4. Inner jig- 1 No 5. Outer jig- 1 No 6. Lowering Fixture- 1 No | — | — | — | 62,010 | |
| — | 1134.00 | — | — | ||
| Digging of cable trench 450/600 mm wide and 900 mm deep in all types of soil including hard, rocky etc. - The price shall cover for digging of 450/600 mm wide and 900 mm deep trench in all types of soil including soft, rocky as per cable route plan and filling back the trench after laying of cables. This also includes clearing of roots of trees and bushes and other temporary obstructions on the selected route. | — | — | — | 1,40,616 | |
| — | 2350.00 | — | — | ||
| Digging of cable trench 100 mm wide and 200 mm deep in concrete/tar road/platform and refilling to its original position after laying of cable in HDPE pipe, 50 mm diameter - The price shall cover for digging of cable trench of size 100 x 200 mm deep in concrete/tar road/platform surface and its refilling/ plastering after laying of cable in 50 mm diameter HDPE pipe of Tijaria/Himalyan/Koncept/ Poddar/Unique/Dutron/Reliance/Baba/Shivam make in existing trench. Supply and laying of HDPE pipe, 50 mm diameter is included in the scope of work. | — | — | — | 9,54,100 | |
| — | 800.00 | — | — | ||
| Supply and laying of DWC pipe, 45/50 mm diameter - The price shall cover for supply of Double Wall Corrugated (DWC) HDPE pipe of 45/50 mm diameter of Tijaria/Himalyan/Koncept/Poddar/ Unique/Dutron/Reliance/Baba/Shivam make. DWC HDPE pipe shall have corrugation on outer wall but inner wall shall be plain conforming to IS: 14930 Part I and II amended from time to time. The pipes shall be "ISI" marked. Accessories like HDPE snap fit coupler with neoprene 'O' ring shall be part of supply to make the joints water/damp proof. The strength and stiffness class of the pipe shall be SN4 and SN8 respectively. The price shall also cover for laying the DWC pipes in the ground below the tracks/road by push through method at a depth below the formation level as indicated in the drawing supplied by railway. The term "formation" level means the earth surface just below the bedding of the ballast. In case of any hard/stony soil, contractor should adopt new technology method in push through method. Each length of the pipes shall be joined together properly using proper size of socket and aligned in a straight line, keeping an inclination to facilitate the draining of water. | — | — | — | 34,400 | |
| — | 800.00 | — | — | ||
| Supply and laying of DWC pipe, 63 mm diameter - The price shall cover for supply of Double Wall Corrugated (DWC) HDPE pipe of 63 mm diameter of Tijaria/Himalyan/Koncept/Poddar/Unique/ Dutron/Reliance/Baba/Shivam make. DWC HDPE pipe shall have corrugation on outer wall but inner wall shall be plain conforming to IS: 14930 Part I and II amended from time to time. The pipes shall be "ISI" marked. Accessories like HDPE snap fit coupler with neoprene 'O' ring shall be part of supply to make the joints water/damp proof. The strength and stiffness class of the pipe shall be SN4 and SN8 respectively. The price shall also cover for laying the DWC pipes in the ground below the tracks/road by push through method at a depth below the formation level as indicated in the drawing supplied by railway. The term "formation" level means the earth surface just below the bedding of the ballast. In case of any hard/stony soil, contractor should adopt new technology method in push through method. Each length of the pipes shall be joined together properly using proper size of socket and aligned in a straight line, keeping an inclination to facilitate the draining of water. | — | — | — | 67,200 | |
| — | 300.00 | — | — | ||
| Supply and laying of RCC half round pipe, 100 mm diameter - The price shall cover for supply of half round RCC pipes of 100 mm inner diameter and 1.0 meter in length as per the description given in Annexure-XXI of tender document. The internal surface shall have a smooth finish without any bulge or projections to avoid damage to the cable. The price shall also cover for laying of half round RCC pipes above the cables for mechanical protection on laid cables in the existing trench. After laying of RCC half round pipe, the trench shall be filled up with soil available thereby. | — | — | — | 16,500 | |
| — | 50.00 | — | — | ||
| Providing uPVC pipe, 50 mm diameter - The price shall cover for supply of uPVC pipe of 50 mm nominal bore diameter and working pressure of 14 kg/sq. cm along with coupling, elbow, tee etc. for protection of cable. The upright cable shall be encased in uPVC pipes for mechanical protection. The pipe shall be clamped with flat MS clamp at each location on upright cable length. uPVC Pipe shall be as per ASTM-D: 1785, Sch-80 of PARIXIT/SWASTIK/ASHIRWAD/ASTRAL/DOLPHIN/POLYTECH/DUKE/FALCON make. The price shall also cover for laying the uPVC pipes in ground/road and under the track by digging open trench method. Each length of the pipes shall be joined together using proper size of uPVC coupler and properly aligned in a straight line, keeping an inclination to facilitate the draining of water. | — | — | — | 8,800 | |
| — | 280.00 | — | — | ||
| Supply and fixing of PVC maxi trunking of size 100 x 50 mm - The price shall cover for supply, fixing, testing and commissioning of ISI marked PVC Maxi Trunking of size 100 x 50 mm with all accessories of make Precision/Gerard/Modi/Prestoplast. The PVC Maxi trunking shall be fixed at site by fabricated clamp of 18 SWG GI sheet at a distance not more than 1.5 meters by machine screw/GI nut bolts, washers etc. The existing power cables shall be laid in the PVC Maxi trunking properly dressed and secured by means of suitable clamps/fasteners etc. | — | — | — | 1,40,000 | |
| — | 170.00 | — | — | ||
| Supply and laying of HDPE pipe, 110 mm diameter by pushing method under track/road - The price shall cover for supply of HDPE (High Density Polyethylene) pipe of 110 mm nominal diameter as per IS 4984-1995 of make Tijaria/Himalyan/Koncept/Poddar/Unique/Dutron/Reliance/Baba/Shivam with accessories required for laying such as coupler, bend etc. as per description given in Annexure-XXI of tender document. The price shall also cover for laying the HDPE pipes in the ground below the tracks/road by push through method at a depth below the formation level as indicated in the drawing supplied by railway. The term "formation" level means the earth surface just below the bedding of the ballast. In case of any hard/stony soil, contractor should adopt new technology method in push through method. Each length of the pipes shall be joined together properly using proper size of socket and aligned in a straight line, keeping an inclination to facilitate the draining of water. | — | — | — | 2,18,960 | |
| — | 150.00 | — | — | ||
| Supply and erection of G.I. perforated cable tray of size 150 x 100 x 100 mm on MS frame with cover - The price shall cover for fabrication, supply and fixing of M.S. perforated cable tray, hot dip galvanized as per latest ISS/BSS of size 150 x 100 x 100 mm and 2.0 mm approximate thickness with appropriate cover of thickness 1.6 mm. The cable tray shall be fixed horizontally or vertically at site and the existing LT cables shall be laid/shifted in the cable tray by disconnecting from the panel/switch end and reconnecting as per site requirement duly tied with suitable clamps with GI nuts, bolts and washers in a safe and secure manner. The fixing clamps shall be fabricated from 50 x 50 x 6 mm MS angle or 50 x 6 mm MS flat duly painted and fixed at approximate distance of 1.5 to 2.0 meter apart with 2" long dowel/fisher rack bolts. The tray shall be fabricated in lengths of 2.0 m and couplers shall be provided at joints. The cable tray cover shall be fixed with GI screws. | — | — | — | 1,36,500 | |
| — | 1300.00 | — | — | ||
| Supply and erection of G.I. perforated cable tray of size 200 x 100 x 100 mm on MS frame with cover - The price shall cover for fabrication, supply and fixing of M.S. perforated cable tray, hot dip galvanized as per latest ISS/BSS of size 200 x 100 x 100 mm and 2.0 mm approximate thickness with appropriate cover of thickness 1.6 mm. The cable tray shall be fixed horizontally or vertically at site and the existing LT cables shall be laid/shifted in the cable tray by disconnecting from the panel/switch end and reconnecting as per site requirement duly tied with suitable clamps with GI nuts, bolts and washers in a safe and secure manner. The fixing clamps shall be fabricated from 50 x 50 x 6 mm MS angle or 50 x 6 mm MS flat duly painted and fixed at approximate distance of 1.5 to 2.0 meter apart with 2" long dowel/fisher rack bolts. The tray shall be fabricated in lengths of 2.0 m and couplers shall be provided at joints. The cable tray cover shall be fixed with GI screws. | — | — | — | 11,76,500 | |
| — | 4290.00 | — | — | ||
| Laying of cable in trench - The price shall cover for laying, testing and commissioning of LTUG armoured cable in existing trench/pipe and its connection at both ends. The cable shall be tested with 500 Volt Megger earth tester before laying it in the trench. The cable cores shall be tested for continuity, absence of cross phasing, Insulation Resistance between conductors to earth/armour and between conductors. The results should be recorded in presence of railways' representative. A composite cable layout plan on ferro-print or computerized print duly laminated in A-4 size should be submitted by the contractor to this office as well as site in-charge after laying of cable. Cables shall be supplied by railways at site engineer's stores. | — | — | — | 90,090 | |
| — | 5269.00 | — | — | ||
| Laying of cable on wall/cover shed/existing tray with MS clamp - The price shall cover for laying, testing and commissioning of LTUG armoured cable on wall/cover shed/in existing tray and its connection at both ends. The cable shall be tested with 500 Volt Megger before laying it in the tray. The cable cores shall be tested for continuity, absence of cross phasing, Insulation Resistance between conductors to earth/armour and between conductors. The results should be recorded in presence of railways' representative. A composite cable layout plan on ferro-print or computerized print duly laminated in A-4 size should be submitted by the contractor to site engineer and Divisional Office after laying of cable. | — | — | — | 1,73,877 | |
| — | 25.00 | — | — | ||
| Supply, fixing, testing and commissioning of 5.0 meter height G.I. street light octagonal pole, double arm complete with all accessories and foundation - The price shall cover for supply, erection and commissioning of 5.0 meter height double arm, G.I. street light octagonal pole as per the specifications mentioned in Annexure-XXI of tender document. | — | — | — | 3,86,625 | |
| — | 44.00 | — | — | ||
| — | 250.00 | — | — | ||
| — | 20.00 | — | — | ||
| — | 200.00 | — | — | ||
| — | 1430.00 | — | — | ||
| Providing GI earthing strip, 25 x 4 mm with PVC sleeve - The price shall cover for supply and laying of G.I. earthing strip of 25 x 4 mm size covered with black coloured PVC sleeve of superior quality from earth pit to control/distribution panel board. The earthing strip when laid on wall shall be fixed by means of suitable size of GI clamps and screws. | — | — | — | 1,22,980 | |
| — | 38.00 | — | — | ||
| Providing maintenance free earthing - The price shall cover for providing maintenance free earthing as per the following specifications - 1. High tensile-low carbon steel rod having diameter not less than 17 mm complying with requirements of BS 4360 Grade 43A or EN10025:2-004 S275JR, molecularly bonded by 99.99% pure high conductivity copper on outer surface with copper coating thickness of 250 micron or more, Length 3000 mm (minimum). Certificates from NABL approved labs shall be submitted with test results. 2. Copper earth bus-bar of size 250 mm x 50 mm x 6 mm having electrical conductivity of 101% IACS, minimum 99.9% copper content shall be exothermically welded to rod with 4 holes of 12 mm diameter (two on each side) for connecting earthing conductor. 3. Earth Enhancement compound should have characteristics as mentioned in the RDSO specifications. It should have low resistivity preferably below 0.2 Ohm-meter, supplied in sealed bags (minimum 75 kg per pit for 5' x 5' x 10' size pit and minimum 50 kg per pit for 300 mm bore type pit. The bags shall be marked with manufacturer's name or trade name, quality, Batch No. and date of manufacture. Certificates from NABL approved labs shall be submitted with test results, for at least following parameters - i) Composition of Earth Enhancement compound ii) Resistivity - < 2 Ohm-meter iii) pH value - > 7 but < 9 iv) Moisture retaining capacity - > 10% at 105 degrees Celsius v) Water solubility - < 5% 4. Backfill material - Good quality soil or excavated soil free from sand, gravel and stones shall be used for backfilling. 5. Earth pit of size 5 feet x 5 feet x 10 feet or min 300 mm bore up to 10 feet using earth auger shall be made. 6. Inspection chamber - A concrete box of 300 x 300 x 300 mm (inside dimensions) and 50 mm thickness of wall, with smooth cement plaster finish shall be provided on the top of the pit. A concrete lid, painted black, approximately 50 mm thick with pulling hooks shall be provided to cover the earth pit. PVC sleeve shall be provided in concrete wall to take out earthing connections. 7. On backside of the cover, date of the testing and average resistance value shall be written with yellow paint on black background. 8. Instead of copper bus- bar and strips mentioned in the drawing, a GI main bus-bar of minimum size 300 mm x 75 mm x 8 mm to be installed on nearby wall etc. It shall be connected to earthing with two GI strips of 50 mm x 6 mm size each, up to a distance of 10 meters from earth bus-bar (minimum 3 meters x 2 Nos GI strips to be supplied). 9. Earthing shall generally be carried out in accordance with the requirement of I.E. Rules, 1956, as amended from time to time and shall confirm to IS: 3043 of 1987 with latest amendment. 10. The earth value shall be measured and recorded at the site by painting on earth pit or nearest wall along with date of testing. It shall be less than 2 Ohms and neutral to earth voltage shall be less than 3 Volt. 11. Earthing performance after a year of installation shall be jointly checked and measured. It should be less than 2 Ohm. 12. General arrangement of the earth system shall be as per the drawing given in Annexure-XXI of tender document. | — | — | — | 3,88,170 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TechSpecsofEnergyEfficientLEDBasedLuminaire.pdf
ATTACHMENT
RailwayBoardsletterNo.2018_CE-I_CT_9dated04.06.18.pdf
ATTACHMENT
WesternRailwaysSpecificationsforACBLTPanelsMCCBandMCB.pdf
ATTACHMENT
2024_06_03InstructionforincorporatingtheJPOCircularetc_ProvisionsintheTenderDocumentforallworksrequiringdiggingworksclosetoRly1.pdf for cable
ATTACHMENT
BankGuaranteeverification.pdf
ATTACHMENT
TenderDocument-BRC-EL-P-13-26-27NEWGCC.pdf
ATTACHMENT
2024_06_03InstructionforincorporatingtheJPOCircularetc_ProvisionsintheTenderDocumentforallworksrequiringdiggingworksclosetoRly1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .