15th Finance Bord (2021-22) & (2022-23)

NAME OF WORK :- BID DOCUMENTS FOR PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY WORK AT

SOMNATH PARK HEADWORK SUMP WITH 3 YEARS OF O & M WORK AT KARJAN FOR KARJAN NAGARPALIKA.

RECAPTUALATION SHEET

SCHEDULE NO. NAME OF WORK AMOUNT IN RS. AMOUNT IN LAC.

PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING

SCHEDULE B-1 MACHINARY AT SOMNATH PARK HEADWORK SUMP, KARJAN 1790008.71

SCHEDULE C OPERATION AND MAINTENANCE FOR 3 YEARS 80550.42

Total Amount Rs.:- 1870559.13

Total Amount Rs.:- 1870559.13

Say Amount Rs.:- 1870560.00

I/We am/are willing to carry out the work @ _______% Above / Below___________Percentage (should be writen in figures and words)

of the Estimated rates mentioned above amount of my / our Tender works out as under.

ALL RATES ARE EXCLUDING GST, GST WILL BE PAID EXTRA

Estimated Amount Estimated Amount

Put to Tender Rs. Put to Tender Rs.

Add % Rs. Add % Rs.

Total Rs. Total Rs.

(In words) (In words)

Consulting Civil Engineer Municipal Engineer

Dharmesh Deshani OPC Pvt Ltd Karjan Nagarpalika

Ahmedabad Karjan

Karjan Nagarpalika

KARJAN NAGARPALIKA - KARJAN

DISTRICT : VADODARA

NAME OF WORK :- BID DOCUMENTS FOR PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY WORK AT

SOMNATH PARK HEADWORK SUMP WITH 3 YEARS OF O & M WORK AT KARJAN FOR KARJAN NAGARPALIKA.

PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY AT SOMNATH PARK HEADWORK SUMP, KARJAN

Sr. No. Description Quantity Unit Rate Amount

Providing submerged centrifugal pump sets (water immersed, dryair filled,

class "F" insulated TEWC motor integrally mounted on volute casing pump

sets for water duty, 3-phase, 50 ±3 % Hz, 415 ± 10 % V along with suitable

foundation / installation device with cable length from pumps to panels & of

1.00 following Material of Construction: Impeller : CF8M, Casing: C.I.FG 260, 44.00 kW 11634.00

Wearing Ring : SS, TC mechanical seal, CS / SS bearing, SS shaft with sleve, SS

strainer & MS motor body. (2w + 2s) (11 kW X 4 Nos)

RATING : upto 30.0 KW

2.00 Installation, testing & commissioning for pump sets 4.00 JOB 20948.00

MS PIPE :- Manufacture, Supply & Delivery of Electric Resistance welded ( Up

To 400 mm ) Submerged Arc Welded ( Above 400 mm) MS Pipe Having

Beveled ends Plate or Coil Confirming To IS-3589-2001 Or Its Latest

Revision/ amendment for following Thickness outside diameter at GWSSB

store or Site anywhere in Gujarat state Including all taxes, Insurance,

Transportation, Freight Charges Octroi , Inspection Charges , Loading

3.00 Unloading Conveyance To Departmental Stores , Stacking Etc All Complete. ( 20.00 RMT 3597.00

Rate for MS Pipe based on the ex. works price of HR Coil as Rs.58500.00

Per MT - without GST( Above 3.15 mm To 10 mm ) & Rs.59000.00 Per MT

Without GST ( Above 10 mm ) as on Jan-2023 ( WPI Index Of HR Coil Of Dec-

2022 is 144) - I/S Epoxy Painting (100 Micron ) & O/S Gunniting 25 mm-

323.9 mm dia 5.6 mm Thick Header Pipe

3.01 ---As above---168.3 mm dia 4.50 mm Thick For Delivery pipe 60.00 RMT 1550.00

MS PIPE :- Lowering, Laying, Jointing & Welding In Position to correct Line &

Level MS Pipe with Outer Gunniting & Inside Lining/ Epoxy Painting on

Pedestal or Chairs Upon Prepared Formation or Prepared bedding in

4.00 Trenches The Rates Include Conveyence From Store To Site Of Work loading 20.00 RMT 341.55

, Unloading , Joint Plastering, Hydrotesting Etc Complete.- 323.9 mm dia 4-7

mm Thick HEADER PIPE

4.01 ---As above---168.3 mm dia 4.50 mm Thick For Delivery pipe 60.00 RMT 207.00

MS Specials : MS SPECIAL PLAIN & SOCKET UP TO 300 mm dia

Providing and supplying ISI mark CI D/F Sluice valves , butterfly valves &

Reflux valves of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading,

6.00 unloading, conveyance to departmental stores, stacking etc. comp. Sluice 1.00 Nos 20384.00

valves as per IS - 780 & 2906 / 1984 P.N. 1.0 with hand wheel/cap operated

(PD Type Short Body

300 MM DIA. For Main Line

KARJAN NAGARPALIKA - KARJAN

DISTRICT : VADODARA

NAME OF WORK :- BID DOCUMENTS FOR PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY WORK AT

SOMNATH PARK HEADWORK SUMP WITH 3 YEARS OF O & M WORK AT KARJAN FOR KARJAN NAGARPALIKA.

PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY AT SOMNATH PARK HEADWORK SUMP, KARJAN

Sr. No. Description Quantity Unit Rate Amount

6.01 ---As above---150 MM DIA DELIVERY LINE 4.00 Nos 5848.00

Providing and supplying ISI Mark CI D/F Butterfly valves as per IS13095 (

Latest Edition ) Of Following class and diameter including all taxes , insurance

, transportation , freight charges , octroi, inspection charges , loading

unloading conveyance to departmental stores stacking etc complete.-

mm Dia Butter Fly Valve IS 13095 with PN 1.0 Header line

REFLUX VALVE Providing and supplying ISI Mark CI D/F Reflux valve as

per IS 5312(latest edition) of following class and diameter including all taxes

, insurance , transportation , freight charges , octroi, inspection charges

loading , unloading conveyance to departmental stores stacking etc

complete- 150 mm Dia. Reflux valves PN 1.0 IS 5312 with ISI mark for

Supply ,Installation, Testing & Commissioning of flange ends Expansion

Bellows as per EJMA standards of overall length of minimum 300 mm

Designed for 15 mm axial Compression and 5 mm axial extension with tie

rods etc. of following MOC & Pressure Ratings . MOC : Bellows SA

Gr.304 , Internal Sleeve : SA 240 Gr.304 , Weld ends IS 2062 Gr B Flanges IS

2062 Gr B ( Drilling as per IS 1538 /IS 6392) & Limit Rods & Nuts CS : IS

- PN 1.0 - NB- NB 300 MM FOR HEADER LINE

9.01 ---As above--- for NB 150 MM FOR DELIVERY LINE 4.00 Nos 4656.00

Kinetic Air Valve :- Providing and supplying C.I. Air valves Of Approved make

& quality Of Following class and diameter including all taxes, Insurance,

Transportation, Freight Charges, Octroi, Inspection Charges , Loading

Unloading , Conveyence To Departmental Stores Stacking Etc Complete. -

mm NB (On Header pipe O/S. the pump house before interconnecting

Lowering, laying and jointing in position following C. I. / D/F Reflux valves,

Butterfly valves, Sluice valves and Air valves including cost of all labour,

11.00 jointing material, including nut bolts and giving satisfactory hydraulic testing, 2.00 NO 1312.15

etc. complete (Rate for all class of valves) for 300 MM DIA.

11.01 ---As above---For 150 MM DIA. 8.00 NO 672.75

11.02 ---As above---For 80 MM DIA. Air valve 1.00 NO 460.00

KARJAN NAGARPALIKA - KARJAN

DISTRICT : VADODARA

NAME OF WORK :- BID DOCUMENTS FOR PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY WORK AT

SOMNATH PARK HEADWORK SUMP WITH 3 YEARS OF O & M WORK AT KARJAN FOR KARJAN NAGARPALIKA.

PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY AT SOMNATH PARK HEADWORK SUMP, KARJAN

Sr. No. Description Quantity Unit Rate Amount

Electromagnetic Flow Meter-inbuilt battery power operated: Design,

supply, installation, testing, commissioning of full bore electromagnetic

flow meter with factory calibration, inbuilt battery power operated,

flanged connection, flow sensor, indicator, transmitter and totalizer with

all accessories viz. surge arrestor, associated cables, cabinets, hardware’s,

etc complete as per following specifications: flow transmitter/convertor

(remote field mounted) : Microprocessor based , modular design , 2 Line

LCD for indication of actual flow rate , forward , reverse. Sum Totalizer

Display , +0.50 % Accuracy at 0.30 to 4 m/sec Velocity , One scalable

pulse/one status , one modules output one GPRS/GSM output , IP

Protection , Die cast alluminium / polycarbonate /SS 316 with anticorrosive

paint /PU finish with glass window enclosure , inbuilt EEPROM and data

Logger 20 meters cable length for sensor to transmitter communication

minimum 5 years, Battery lifetime ,3.6 VDC Non Rechargeable lithium

thionyl chloride /NI Cd high power batteries , hourly basis worldwide

transmission of measured data and events via e mall and sms by

integrated GSM/GPRS Modem , Reliable data storage facility through

integrated SD Card etc along with wall mounted / Stand mounted cabinet :

full bore Electromagnetic Flow Meter-inbuilt battery power operated-

PN-10- 300 mm Nominal bore

PRESSURE VACCUM GAUGES WITH ACCESSORIES :-Design, Supply,

Installation, Testing, Commissioning of Bourdon Type Pressure Gauge, ±1%

accuracy, Direct bottom 1/2" NPT (M) process connection, IP 67, Glycerine

filled, SS304 Case with Bayonet Type Bezel, SS316 L Bourdon Tube, SS316

Movement material, Aluminium dial with black graduation on white

background, Micro Zero adjustable pointer, neoprenegasket, Blow out disc,

shatter proof glass, SS tag plate etc as per IS 3624. 150 mm Dial Size 0 to

Header and Delivery Line

Single Girder EOT Crane : Supply, installation, testing & commissioning single

girder type fully electrically operated EOT crane with electrically operated

hoist,class II duty, geared travelling trolley with seven meter lift complete

with long travel rail track (40 mm sq. bar), moving or cross girder, allthree

14.00 motions electrically operated by suitable rating motor IP 54, control panel & 1.00 NOS 368250.00

down pendant control block, brake, safety device,cables form motor to

starter panel & other required accessories & tested as per IS Specifications.-

0.00 To 6.00 Mtr 1 Tonne

KARJAN NAGARPALIKA - KARJAN

DISTRICT : VADODARA

NAME OF WORK :- BID DOCUMENTS FOR PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY WORK AT

SOMNATH PARK HEADWORK SUMP WITH 3 YEARS OF O & M WORK AT KARJAN FOR KARJAN NAGARPALIKA.

PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY AT SOMNATH PARK HEADWORK SUMP, KARJAN

Sr. No. Description Quantity Unit Rate Amount

Float/ Displacer Type Level Switch:

Design, Supply, Installation, Testing and Commissioning of Top mounted

Displacer Type level switches with 2 nos SPDT contacts of Micro switch

rated 5 A, potential free power supply, Material of wetted parts shall be SS

316 and the material of accessories shall be SS. IP 65 or equivalent degree

of protection for enclosure, suitable for sump, ESR, tank, vessels and

underground reservoirs. The top mounted level switches shall be

supplied with still tubes to suit the requirement. Accessories like name

plate, mating flange, gaskets, fasteners, bolts & nuts, etc. shall be

supplied with the Level Switch of following Range.

Ultrasonic Type Level Transmitter with Remote Display :

Design, Supply, Installation, Testing and Commissioning of NOn Contact

Ultrasonic Type Level Transmitter with Remote Display. Sensor: The sensor

should be non contact type, field mounting type, housing shall have

minimum IP65 protection, PP/ PVC Sensor MOC, with sensor to transmitter

cable. Remote Indicator cum Transmitter: Microprocessor based indicator

with LED / LCD digital display,panel/ wall mounting type, power supply shall

be 110-240 Vac or 15 to 36 Vdc, 50 Hz ± 10 %. Accesories: Mounting

bracket, nut, bolts etc as per system requirement and Hook up diagram of

the Instruments. Level Transmitter shall be suitable for following Range. 0 to

SITC of Star Delta starter suitable for local & remote pump control

application consisting of MPCB, overload relay and contactors as per Type II

coordination including digital voltmeter, analogue ammeter with selector

switch, run hour meter, required protective relays & control accessories.

Rating - 11 Kw (15 HP)

Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse Unit

Cubical type for panel mounting complete with operating mechanism

18.00 suitable to operate on 415V A.C. With HRC fuses of suitable load confirming 2.00 EACH 2560.35

to IS. 13947 (Part I & III). of following capacities

(e) 63 Amp Cat III

MEDIUM VOLTAGE CABLES

Supply, laying, testing & commissioning 1.1 kV grade, XLPE insulated,

stranded Aluminium conductor, galvanised steel flat strip / round wire

armoured, extruded PVC type ST2 sheathed, heavy duty cable (to be laid on

wall surface with necessary clamps / in existing cable trench / cable trays /

conduit / pipe sleeves at road crossing or floor as per site requirement)

conforming to IS: 7098 (Part-1) & IEC: 60502 (Part-1) of following sizes: 4C x

KARJAN NAGARPALIKA - KARJAN

DISTRICT : VADODARA

NAME OF WORK :- BID DOCUMENTS FOR PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY WORK AT

SOMNATH PARK HEADWORK SUMP WITH 3 YEARS OF O & M WORK AT KARJAN FOR KARJAN NAGARPALIKA.

PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY AT SOMNATH PARK HEADWORK SUMP, KARJAN

Sr. No. Description Quantity Unit Rate Amount

Cable terminals (lugs): Providing & fitting crimping type Cable Terminals

(Lugs) conforming to IS of following types and sizes Aluminium Reducer

Terminals (in Sq.mm.)

Cable Gland: Providing and fitting heavy duty brass cable glands ( nickel-

plated) with washers & rubber ring conforming to IS, suitable for 3,3 1/2 &

core cables of following type and sizes. Single compressor Brass cable glands

CHEMICAL EARTHING SYSTEM

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of

40 mm having 200-250 Micron galvanising, connection terminal dia of

mm with constant ohmic value surrounded by highly conductive compound

with high charge dissipation suitable for following type of applications with

22.00 chamber and heavy duty cover.(approved make OEM has to submit test 1.00 No. 7802.25

certificate including value of earth resistane of installation. [B] For Electrical

installation up to 11 KV located in other than normal soil i.e. Soft Rock,

Marshy Soil etc.-Length of Pipe : 2 mtr

-Back filling Compound :

Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) suitable

for safe earthing device.

SITC of 50mm(w) x 6mm(T) etc. sizes as required, HOT deep GI Strip

including supply & fixing using GI spacers, saddles when laid inside the

building and inclusive of excavation & refilling of earth when laid outside the

building & interconnection with earth pit & all electro-mechanical

equipments.(50X6 G.I Strip wt.2.3 kg/m, 2.3x30Mt.=69kg.)

Supply & laying GI perforated type cable trays with returned edge / flange,

fabricated from 2.0 mm thk sheet steel in the standard length of 2.5 mtrs,

duly hot dipped galvanized after fabrication as per IS 2629-1989 / IS 4759-

24.00 1984 including accessories such as coupler plates/ fish plates, bends, tees, 40.00 RMT 336.00

reducers, elbows, covers and electro-galvanized hardware etc, erected on

existing support as per specification and instruction of Engineer-in-charge.

150 (W) x 50 mm (H) X 2 mm Thick - Ladder type

KARJAN NAGARPALIKA - KARJAN

DISTRICT : VADODARA

NAME OF WORK :- BID DOCUMENTS FOR PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY WORK AT

SOMNATH PARK HEADWORK SUMP WITH 3 YEARS OF O & M WORK AT KARJAN FOR KARJAN NAGARPALIKA.

PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY AT SOMNATH PARK HEADWORK SUMP, KARJAN

Sr. No. Description Quantity Unit Rate Amount

Point wiring: Point winng for Light/ Bell with 2-1.5 sq mm & earthwire of

sq mm (Green) both are of lSImarked 1.1kV grade FRLS PVC insulated

multistrand copper wrres, in following type of pipe to be erected concealed

in/on surface on wall/ceiling complete with 6A Modular type switch/ bell

push & accessories and earth continuity of following type, erected on PVC/

Metallic box, single mounting base frame covered With textured/ metallic

front plate modules erected on/ in wall/ ceiling as per pipe erected, with

necessary Lamp holder/ ceiling rose/ H D.Connector as directed. a)with

medium class Rigid PVC pipe and accessories. Cat. III

PVC Pipes: Providing and erecting lSI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/ in wall or ceiling erected with

26.00 necessary PVC fittings & Junction boxes fixed with adhesive solution & 50.00 Mtr 24.24

Clamps With following dia of pipes in approved manner as directed. a)

Wires: SITC of Main & Outlet points wiring with 1.1KV Grade FRLS PVC

insulated ISI marked flexible stranded copper conductor wires with medium

class min. 25mm dia. Rigid PVC Pipe and accessories to be erected conceled

in/to be run on surface /wall/ ceiling with following sizes as mentioned

below. The unit rate wiring shall be with connector, PVC junction box, wire

holder, ceiling rose, Angle holder, switch, switchboard brass

chromium/cadmium plated machine screws, phase and neutral wires, green

earth continuity wires etc. as required to complete wiring from LDB panel to

the final outlet termination points. The wiring shall be as per IS :732, Is :

4648 and as per tender specification / IS (a) SITC of Main wiring with 3wire

1.5 Sq.mm (in existing pipe)

Indoor LED fitting: Supplying and erecting LED indoor Fittings with LED's of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housig used

as a head sink shall be made of thick sheet steel confirming to IS 513 CRCAV/

aluminium die cast poweder coated and high UV & corrosion resistance with

diffusser with company mark/name 160 to 270 V. Power Factor more than

0.95, THD<15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings. (A) Tube Light with integral driver

IV) 22-24 Watts, Surge -2KV, IP-20, conventional 4 Feet, Cat-III

KARJAN NAGARPALIKA - KARJAN

DISTRICT : VADODARA

NAME OF WORK :- BID DOCUMENTS FOR PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY WORK AT

SOMNATH PARK HEADWORK SUMP WITH 3 YEARS OF O & M WORK AT KARJAN FOR KARJAN NAGARPALIKA.

PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY AT SOMNATH PARK HEADWORK SUMP, KARJAN

Sr. No. Description Quantity Unit Rate Amount

LED Outdoor Fittings: Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

29.00 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM- 2.00 Nos 5976.17

80 certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the

ranges shown. ) A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply with over-voltage

(iii) Above 60 watts to 90 Watts, Cat-III

Supplying and erecting B class galvanised iron pipe 32 mm outside dia 45 cm

long duly welded on 20 cm x 20 cm x 3 mm thick M.S. base plate, erected on

wall or corner for mounting street light luminaire with necessary hardware

materials duly painted.

SITC of Lighting Distribution Board (LDB) as under: Supplying & erecting

Sheet Steel powder coated Cable end termination Box to be mounted on

Top or Bottom of the MCB Distribution Box for housing/covering Extra wires

& Cables, suitable for following size of MCB DB Box.

(B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (iii)3 Phase 4 Wire FP, 8 way Pre-wired LDB (One

each for Indoor & Outdoor Lighting) - 2 Nos

Providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral 415V,50Hz. having

32.00 characteristic of quick action & tripping with all advance feature & do not 2.00 Nos 2569.44

incorporate any electronic component for following Max. rating erected as

directed (i) incoming 25 Amps. FP - RCCB 2 Nos.

Providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

Outgoing: 20A SP MCB 'C' curve (2 nos.) & 16A SP MCB 'C' curve (2 nos.) (At

Providing and fixing printed instruction chart both in English and Gujarati and

34.00 duly framed with front glasses, for treatment of person suffering from 2.00 No. 130.29

Electric shock with minimum 50" diagonally size.

KARJAN NAGARPALIKA - KARJAN

DISTRICT : VADODARA

NAME OF WORK :- BID DOCUMENTS FOR PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY WORK AT

SOMNATH PARK HEADWORK SUMP WITH 3 YEARS OF O & M WORK AT KARJAN FOR KARJAN NAGARPALIKA.

PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY AT SOMNATH PARK HEADWORK SUMP, KARJAN

Sr. No. Description Quantity Unit Rate Amount

Supplying rubber matting of following thickness as per IS:15652/IEC

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut &

bolts grouted in wall complete. [B] For 5.5 / 6.5 KG Capacity

Supplying stand first AID box with anticeptic cream, medicine for use on

wounds due burn, crepe bandage, guage bandage, medicated ready to use

bandage (Band-aid) adhesive tape for medicinal user, scissors, anticeptic

solution (Savlon or similar) etc. (All above contents shall be of standard

Total Amounts Rs...…......

Total Amounts Rs...…......

Consulting Civil Engineer Municipal Engineer

DD(OPC) PVT. LTD. Karjan Nagarpalika

Ahmedabad Karjan

Karjan Nagarpalika

KARJAN NAGARPALIKA - KARJAN

DISTRICT : VADODARA

NAME OF WORK :- BID DOCUMENTS FOR PROVIDING, SUPPLYING AND INSTALLATION WORK OF PUMPING MACHINARY WORK AT SOMNATH

PARK HEADWORK SUMP WITH 3 YEARS OF O & M WORK AT KARJAN FOR KARJAN NAGARPALIKA.

OPERATION AND MAINTENANCE FOR 3 YEARS

SR. NO. ITEM DESCRIPTION QUANTITY UNIT TENDER RATE AMOUNT

Comprehensive Operation and Maintenance of the pumping

machinery, electrical work & other works as a whole including

1) Breakdown Maintenance or Emergency Maintenance,

2) Preventive or Periodic Maintenance,

3) Major Maintenance (or Special repairs and replacement

including Training to O & M staff of Municipality. The rate

1.00 shall also include all consumables and deployment of 1.00 Year 26850.14

Manpower including electric power. The O & M work shall be

carried out as per detailed specifications in the tender &

maintaining the record for the same. --for 1st year

for 2nd year 1.00 Year 26850.14

for 3rd year 1.00 Year 26850.14

Consulting Civil Engineer Municipal Engineer

Dharmesh Deshani OPC Pvt Ltd Karjan Nagarpalika

Ahmedabad Karjan

Karjan Nagarpalika