CONSTRUCTION OF FGD HUT NANDROOL IN NANDROOL BEAT

Amount

Excavation work by mechanical mean (Hydraulic Excavator) manual Means in foundation Trenches or drain ( not exceeding 1.5Mtr. width or 10Sqm on plan) including dressing of sites and ramming of bottoms lift up to 1.5 mt. including getting the excavated soild and disposal of surplus Excavated soil as directed with in lead of 50mt.

providing and laying in position cement concrete of specified grade excluding the cost of centering ,shuttring ;- all work up to plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20 mm nominal size )

random rubble masonary with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggerate 20 mm nominal size ) upto plinth level with in cement moratr 1:6 (1 cement :6 sand ) centering and shuttring including strutting, propping etc. and removal of form for.

Lintels ,beams ,plinth girders bressumers and cantilevers

Suspanded floors,roofs, landing , balconies, and access platform

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15⁰ landing , balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttring, finshing and reinforcement with 1:1:5:3 (1 cement : 1.5 coarse sand) 3 graded stone aggregate 20 mm nominal size ).

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and blinding all complete upto plinth level.

brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and size in.

Half brick masonry work with common burnt clay F.P.S ( non modular) bricks of class desiganation 7.5 in superstructure above plinth level upto floor V level in all shapes and size in.

providing wood work in frames of doors, window, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and legth ( hold fast lugs or dash fastener shall he paid for separately ) 2nd class sal wood

providing and fixing coated galavanised iron profile sheets (size, shape and pitch of corrougation as approved by engineer in charge mm (0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polystar top coat 15-18 microns sheet should have protective guard film of 25 microns minimum to avoid scatches during transportation and should be supplied in sinle length upto 12 metre or as desired by engineering charge. the sheet will be fixed using self drilling /self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch inhorizonatal/vertical or curved surface,excluding the cost of purlines. rafters and trusses and including cutting to size and shape .

providin g and fixing precoated galavanished steel sheet roofing accessossories 0.50mm (+0.05%) total coated thickness zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade , 5-7 microns e[poxy primer on both side of the sheet and poluster top coat 15-18 microns using self drilling / self tapping screw complete plain ridges .

Providing and fixing MSBP sheet 1.66 mm to 2 mm thick in eaves board/facia/soffits/ceiling including cutting fixing and welding to steel roof member and applying a coat of red lead primer complete as per the instruction of engineer in charge (base member of steel work shall be measured & paid separatly) Eave boards

supplying and filling in plinth with sand under floors including watering, ramming, consoildating and dressing complete

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete

Providing and fixing 1st quality ceramic glazed tiles conforming to IS 15622 (thickness to be specified by the manufacture ) of approved make in all colors. Shades expect burgundy, bottel green, black of any size as approved by engineer in charge in skirrting. risers of steps and dados over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with gray cement slurry @3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS 15622 (thickness to be specified by the manufacture ) of approved make in all colors. Shades expect burgundy, bottel green, black of any size as approved by engineer in charge in skirrting. risers of steps and dados over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with gray cement slurry @3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

15mm cement plaster on the rough side of single or half brick wall of mix in ratio 1:6 (1 cement: 6 coarse sand )

Providing and fixing Ms grills of required pattern in frames of window etc. with MS square round bars etc. including priming coat with approved steel primer all complete

steel work welded in built up sections/ framed work, including cutting, hoisting, fixing, in postion and applying a primming coat of approved steel primer using structual steel etc as required .in stringers trends landings etc. of stair cases including use of chequered plate wherever required all complete

providing and fixing panelling and glazzing in panelled and glazed shutters are doors windows and clerestory window (area of opening for pannel inserts excluding portion inside grooves or rebates to be massured ) panelling for panelled or panelled and glazed shutters 25mm to 40mm thick second class teak wood .

provding and fixing wire gauge shutters using galvanized M.S wire gauge of average width of aperture 1.4mm in both directions with wire of dia 0.63mm for doors windows and clerestory windows with hinges and necessary screws 35mm thick second class teak wood

providing and fixing bright finished brass sliding door bolts anodized colours and shade with bolts and nuts screw etc. complete 300x16

providing and fixing aluminium towr bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to reuired colours or shade, with necessary screws etc complete 150x10mm

providing and fixing ISI marked oxdised MS handles conforming to IS 4992 with necessary screws etc 125mm

providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete

providing and fixing 100mm bright finished hard drawn hooks and eyes 100mm

Providing and fixing flat pressed 3 layer medium density partical board or graded particile board (grade ) IS : 3087 marked in celing with necessary nails etc. complete ( frame work to be paid separetly )12mm thick

distempering with oil bound washable distemper of approved brand and manufacture and of required shade on undercoarted wall surface to give ameven shade over and including a p new work (two or more coats) over and including thinnable priming coat with cement primer

Finishing wall with water proofing cement paint of required shade new york ( two or more coats applied @ 3.84 kg/10 sqm )

Applying priming coat with ready mixed pink or gray primer of approved and manufacture on wood work ( hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacturing to give an even shade ( two or more coasts on new wood)

Painting with synthetic enamel paint of approved brand and manufacturing to give an even shade ( two or more coasts on new wood)

constructing coursed rubble hammer dressed "U" shape open surface drain with side wall 15 x 22 cm in cement mortar 1:6 (1 cement:6 sand ) and inside plastering with cement mortar 1:3 ( 1 cement : 3 sand ) including earth work and laying 10 cm cement concrete 1:5:10 ( 1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size ) and 7.5 cm cement concrete 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size ) and finished with a floating coat of neat cement complete as per standerd design.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,nuts, and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix ( 1 cement : 3coarse sand : 6 graded stone aggregate 20mm nominal size ).

cement concrete flooring 1:2:4 with 40mm thick with 20mm nominal size stone aggregate

Boulder/brick pieces, gravel filling in sock pit.

coursed ruble masonaryy (first sort) with hard stone of approved quality in foundation and plinth i/c raking out joints in cement out of joints in cement Mortar 1:6 (1 cement 6 sand)

aplying primary coat with readymixed red oxide chromate primer of approved brand and manufacturing of steel works

providing under laying damp proof couse to horizontal surface with cementconcrete 1:2:4 for coping and curing complete 20mm thick

prividing and laying in position cement concrete of spefied grade excluding the cost of centering, shuttring, all work up 1:4:8 aggregate 20mm nominal size

prividing and laying in position cement concrete of spefied grade excluding the cost of centering, shuttring, all work up 1:3:6 aggregate 20mm nominal size

stone solling properly hand packed i/c ramming complete under floor water tank

suspended floors,, roofs, landingand shelves and their support balconies, beams, girders, bressmurs and cantilever upto floor two level

Providing form work with steel plates 3.15mm thick welded so as to give fair finish i/c shuttring, struting propping etc. With wooden batten and ballies the height of propping and centring below supporting floor to ceiling not exceeding 4mtr. Complete walls but not less than 10Mtr. thickness i/c attached pillater, buttresses, plinth & string course etc.

flat surface such as soffits of suspended floor rufls landing and the like up 400mtr. In thickness

edge of slabes and bresks in floors

cement concrete flooring 1:2:4 with 40mm thick with 20mm nominal size stone aggregate

12mm thick cement pilaster in a single coat on fair/rough side of concrete stone and brick wall for internal plaster up to flooor two level i/c arrises internal rounded angle chamfered angle not exceeding 80mm in girth and finished een and smooth in cement in cement 1:4 comeplete i/cpreparing surface

providing & laying in trenches Galvanized mild steel tubes (MG) tube fitting complete with G.I fittings including trenching and refilling etc. (65mm dia)

providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end) 18.17.5 i) 65mm nominal size

providing and laying high pressure PVC Spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. Complete 110mm dia.

providing and jointing in position PVC collars ISI marked including fixing with approved adheive etc.

providing and jointing in position PVC bends ISI marked including fixing with approved adheive etc.

Suppling and fixing fixed cast iron cover with frame for man holes frame of 500mm dia C.I cover (medium duty) the weight of cover to be not less than 58 kg

Providing & fixing to wall ceiling and floor galvanized mild steel tube (Medium grade) tube fittings and clamps including making good the wall ceiling and floor and carriage of material in all lead & lift including carriage as per approved brand of Architect/ Site Engineer.15mm dia

20mm dia

Providing & fixing in trenches, galvanised mild steel tubes (medium grade) tube fittings earth work in trenches to be measured & paid for separately including carriage as per approved brand of Architect/ Site Engineer. 15mm dia

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. including carriage as per approved brand of Architect/ Site Engineer.75 mm nominal size

110mm nominal size ISI

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage as per approved brand of Architect/ Site Engineer.: i) 110mm nominal size

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage as per approved brand of Architect/ Site Engineer.: i) 75mm nominal size

ii) 110mm nominal size

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete complete including carriage as per approved brand of Architect/ Site Engineer.: i) 75mm nominal size

ii) 110mm nominal size

Providing and fixing M.S. stays &clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage as per approved brand of Architect/ Site Engineer.:110mm nominal size

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage as per approved brand of Architect/ Site Engineer.:75mm nominal size

110 mm nominal size

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.l. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitttings including carriage as per approved brand of Architect/ Site Engineer.610 x 460 mm with bowl depth 200 mm.

Providing and fixing white vitreous pedestal type water closet(European type W.C. pan) with seat & lid, 10 litre low level white PVC flushing cistern, including flush pipe, with mannually controled device (handle lever), conforming to IS: 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White vitreous china W.C pan with ISI marked white solid plastic seat & lid.

Providing and fixing 8mm dia C.P./S.S. jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer-in-charge.

Providing and fixing vitreous China wash basin with C.I.brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass wasteof standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:White vitreous China wash basin size 550x450mm with a pair of 15mm C.P. brass pillar taps

Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and ashers including carriage as per approved brand of Architect/ Site

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. weighing not less than 88 gms.17.73.2 600 mm long towel rail with total length of 645 mm. 78 mm wide and effective height of 88 mm,weighing not less than

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,200 mm wide with minimum distances of 37 mm from the wall face with concealed fittings arrangement of approved qualiti and colour, weighing not less than 88 gms.

Providing and fixing 600mm x 120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. Brass brackets and guard rail complete fixed with 40 mm long screws,awl plugs etc. including carriage as per approved

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws at approved brand of Architect/ Site Engineer

Providing and fixing C.P. brass bib tap (Superior or heavy type) with Aerator including carriage as per approved brand ofArchitect Site Engineer 15 mm dia

Providing and fixing C.P. brass stop cock (concealed) of approved quality conforming to IS: 8931. 18.52 1 15 mm nominal bore.

Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms. 18.50.1 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 18.50.1 15 mm nominal bore.

Providing and fixing C.P. brass pillar tap with capstan head 15mm dia

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (Screwed end); 20mm nominal bore

Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete:15mm nominal bore

Providing and fixing vitreous china vitreous china pedestal for ah basin compoletely recesed at the back for the reception of pipes

Providing and fixing 100mm dia C.P brass grating for gully, floor or nahni Trap

providig and fixing terminal guard sand cast iron IS-1729 100 mm nominal size

Providing and fixing CP brass bath shower with 15mm or 20mm inlet. 100mm dia

Providing and fixing pvc waste for sink and wash basin including PVC waste fitting complete17.28.1.1 32mm dia

Providing and brass full way valve with wheel 15mm nominal size

Providing and fixing PVC water storage tank ISI 12701 marked, GI inlet and outlet connection, 15mm bore ball valve and mosquito proof PVC cover with locking arrangement inlcuding hosting up to all heights avove ground level:- ltr. Net capacity

Provding and fixing trap of self cleaning design with screwed down or hinged grating wih or without vent arm complete including cost of cutting and making good the walls and floors etc. Complete sand cast irorn S&S as per IS 1729 110x75mm

Provding and fixing trap of self cleaning design with screwed down or hinged grating wih or without vent arm complete including cost of cutting and making good the walls and floors etc. Complete sand cast irorn S&S as per IS 1729 110x75mm

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. Complete

Supplying and fixing CI cover 300x300 mm without frame for gully trap (standard pattern) the weight of the cover to be not less than 45 KG

smoke testing of soil or ventilating pipes (new and old) any height or diameter together with the length of drain connecting the soil pipe with the nearest manhole (including use of ladders)

RAJ KUMAR