Loading
Loading…
Loading…
Tender Value
₹1.0 L
EMD Value
₹1,277
Closing Date
29 Jun 2026, 5:00 pmClosed
AM EnM Sijua Area
Sijua Area office
Complete Repairing/Overhauling of lathe machine Sl.No.7280 Balta make at SBC Works Shop under Area
2026_BCCL_361103_1
GM/SA/AM(EnM)-NIT/2026-27/024
Open Tender
Electrical and Maintenance Works
Percentage
10 days
SBC W/Shop under Sijua Area
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,277
15 Jun 2026
15 Jun 2026
30 Jun 2026
16 Jun 2026
29 Jun 2026
16 Jun 2026
16 Jun 2026 - 23 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Description of Job | |||||
| 1.01 | Making of New main Spindle attachment | 1 | no | 5,225 | ₹5,225 |
| 1.02 | Repair In feed gear assly worn-out pinion | 1 | no | 20,300 | ₹20,300 |
| 1.03 | Repair of cross Slide Threading syst | 1 | no | 7,262 | ₹7,262 |
| 1.04 | Repair of head stack and centre | 1 | no | 8,882 | ₹8,882 |
| 1.05 | H.G Shaft pinion key way cut B pinion rep | 1 | set | 5,740 | ₹5,740 |
| 1.06 | Welding & polishing DG pinion & bore | 1 | no | 8,850 | ₹8,850 |
| 1.07 | PG pinion teeth cut & machining bush fit | 1 | set | 6,190 | ₹6,190 |
| 1.08 | Open , Re-fit. Servicing & aligment H/skilled | 10 | no | 981 | ₹9,810 |
| 1.09 | Open , Re-fit. Servicing & aligment U/skilled | 10 | no | 674 | ₹6,740 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 2.69 MB
BOQ_373980.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .