PROVN OF COVERED SHED WITH HARD STANDING FOR UNIT MT AT 119 FD WKSP AND VEG SORTING OUT SHED NEAR BLDG NO T-1 AT 297 ASC UNDER GE ROORKEE

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface (soft/loose soil) complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed

M&L Rendering 15 mm thick in CM 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) including preparation of new plaster surfaces of wall and two coat of cement base paint complete all as specified and directed.

M&L for type C2 1:3:6 (40 mm graded aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and directed.

Surface excavation in soft and loose soil not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Removing excavated materials n.exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete as specified and directed.

M&L for MS work as in iron plats (150x150x6mm) including cuttings to shape, welding as directed and fixing with scres, bolts etc conforming to Fe-290. Gde E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete as specified and directed.

S&F Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M&L for Hardcore of gauge n exc. 63mm with broken stone and boulders deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 100mm thick Cement concrete type D-2, (1:4:8) (40mm graded aggregate) as in sub base etc complete all as specified and directed.

M&L 75mm thick Cement concrete type B-2, (1:3:6) (40mm graded aggregate) as in floor laid in alternate bays Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green etc complete all as specified and directed..

Supply only 38mm width Glass dividing strips, 3 mm thick and inserted in position confirm to design complete all as specified and directed.

M&L for 80 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade over 20 mm thick sand made with grey cement and pigment complete all as specified and directed

M&L PCC (1:2:4) type B-1 using 20 mm grade stone aggregate as in coping, weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

M&L for Mild Steel work for vertical post, compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and directed.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) using coarse sand on fair faces of brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface.

M&L for preparation of new/old wall surface and applying two coat OBD including primer all as specified and directed.

m/s rajesh bros. (BID ID -3162994)

M/S RAJESH ARORA (BID ID -3164340)

G.H. INFRASTRUCTURE PRIVATE LIMITED (BID ID -3163871)

AMAN MATERIAL AND LABOUR CONTRACTOR (BID ID -3164584)

M/S GIRI CONSTRUCTION CO. (BID ID -3163742)

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3161837)

VIMAL CONSTRUCTION CO (BID ID -3164382)

CHITTER MAL & CO (BID ID -3162913)