Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹42.9 LAdmitted-Finance 268 RABINDRA PALLY BLOCK D KOLKATA PIN 700086 | KOLKATA | KOLKATA | WEST BENGAL | 700086 | -11.56% | ₹42.9 L | L1 | Admitted-Finance |
| 2 | L2₹49.3 LAdmitted-Finance A 90 NEW RAIPUR ROAD KOLKATA 700084 | KOLKATA | KOLKATA | WEST BENGAL | 700084 | +1.66% | ₹49.3 L | L2 | Admitted-Finance |
| 3 | L3₹49.5 LAdmitted-Finance | +2.00% | ₹49.5 L | L3 | Admitted-Finance |
Tender Value
₹48.5 L
EMD Value
₹97,038
Closing Date
25 Feb 2026, 12:00 pmClosed
EE MDD-I
Office of the Executive Engineer Metropolitan Drainage Division No. -I Jalasampad Bhavan (4th Floor), South Block, Bidhannagar, Kolkata- 700 091
Internal furnishing and decoration with allied Civil and Electrical works for two suites at 2nd floor of Newly constructed Guest House including installation of CCTV located within Sech Abasan Complex, Sector-III, Block DF, Salt Lake
2026_IWD_1003864_1
WBIW/EE/MDD-I/e-NIT- 24/ 2025 - 26
Open Tender
CIVIL WORKS
30 days
Sech Abasan Complex
Please refer Tender documents.
7 documents required · 7 mandatory
₹97,038
Yes
12 May 2026
11 Feb 2026
25 Feb 2026
11 Feb 2026
25 Feb 2026
11 Feb 2026
Supplying, fitting and fixing of Vintage/ Antique looking decorative single-seater wooden couch of size [73.60 cm X 63.50 cm X 60.90 cm) made of teak wood & properly covered with upholstery of approved shade, thickness and quality along with necessary cushioning. All wooden surfaces to be finished with P U finish machine polish [Make - WoodTech Emporio Gold PU White Elegant Opaque PU Finish of Asian Paints] along with preparing surface including scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc./Clear P.U finish as per design requirements of Asian Paints and inclusive of all operation, material and labour complete & 18mm-20 mm granite top to placed on the top on the table. The entire unit must be frabricated from renowned manufactures having valid ISO 9001-14001, & complete in all respect as per approved colour shade, approved material specifications, design & direction of Engineer-In-Charge. (Ply Make: Century/Green, Laminate Make: Century/Green, Locks/Hydraulic Make- Godrej/Ebbco, Wood - Teakwood, PU - Asian Paints)
Supplying of Vintage/ Antique look decorative wooden rectangular centre table [1.06m X 0.550m X 0.45m] , table top & framework to be made of teakwood & 18mm-20 mm granite top, to be finished with P U finish machine polish [Make - WoodTech Emporio Gold PU White Elegant Opaque PU Finish of Asian Paints] along with preparing surface including any scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc. / Clear P.U as per design requirements and inclusive of all operation, material and labour complete.The entire unit must be frabricated from renowned manufactures having valid ISO 9001-14001, & complete in all respect as per approved shade, design & direction of Engineer-In-Charge. (MDF Make: Century/Green, Ply Make: Century/Green, Laminate Make: Century/Green, Locks/Hydraulic Make- Godrej/Ebbco, Wood - Teakwood, P.U - Asian Paints)
Supplying, fitting and fixing VINTAGE/ANTIQUE looking decorative teakwood made bed side table of size [0.450 m x 0.450 m x 0.500 m] with 2 drawers having telescopic channels, SS/Brass Decorative Handles, Locking arrangement all complete, all wooden surfaces to be finished with P U finish machine polish [Make - WoodTech Emporio Gold PU White Elegant Opaque PU Finish of Asian Paints] along with preparing surface including scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc. and inclusive of all operation, material and labour complete . The entire unit must be frabricated from renowned manufactures having valid ISO 9001-14001, & complete in all respect as per approved colour shade, approved material specifications, design & direction of Engineer-In-Charge. (Ply Make: Century/Green, Laminate Make: Century/Green, Locks/Hydraulic Make- Godrej/Ebbco, Wood - Teakwood)
Supplying fitting and fixing as per layout 4 seater dinning table [1.40m X 0.80m X 0.76m] made of teakwood framework, toughned glass top of thickness 12mm as per approved design & layout, 4 nos dining chairs with back support made of teakwood framework and leatherite seat with cushioning made of approved upholstery & finished with PU Clear Machine polishing, complete in all respect as per approved shade, design & direction of Engineer-In-Charge. (MDF Make: Century/Green, Ply Make: Century/Green, Laminate Make: Century/Green, Locks/Hydraulic Make- Godrej/Ebbco, Wood - Teakwood, P.U - Asian Paints)
Supplying of Vintage/ Antique look decorative wooden round coffee table [0.80 m X 0.80 m X 0.450 m] , table top & framework to be made of teakwood to be finished with P U finish machine polish [Make - WoodTech Emporio Gold PU White Elegant Opaque PU Finish/Clear P.U finish as per design requirement of Asian Paints] along with preparing surface including scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc. and inclusive of all operation, material and labour complete & 18mm-20 mm granite top to placed on the top on the table. The entire unit must be frabricated from renowned manufactures having valid ISO 9001-14001, & complete in all respect as per approved shade, design & direction of Engineer-In-Charge. (MDF Make: Century/Green, Ply Make: Century/Green, Laminate Make: Century/Green, Locks/Hydraulic Make- Godrej/Ebbco, Wood - Teakwood)
Supplying of decorative wooden rectangular centre table with 12mm toughned glass top [1.06m x 0.55m x 0.45m] made of teakwood table framework & spacious designed storage shelf and finshed with PU Clear Machine polish.The entire unit must be frabricated from renowned manufactures having valid ISO 9001-14001 & complete in all respect as per approved shade, design & direction of Engineer-In-Charge.(Ply Make: Century/Green, Wood - Teakwood, P.U - Asian Paints)
Supplying, fitting and fixing as per layout single-seater sofa of size [0.76m X 0.84m X 0.84m ]made of hardwood framework as per approved design, double cushioned backrest, track armrests,plush seating, tapered block legs, guarding floor buffers finished with upholstery of approved shade & thickness with necessary cushioning, including one number additional cushion from renowned manufactures. The entire unit must be frabricated from renowned manufactures having valid ISO 9001-14001 & complete in all respect as per approved shade, design & direction of Engineer-In-Charge.
Supplying, fitting and fixing as per layout double-seater sofa of size [1.50m x 0.84m x 0.84m ]made of hardwood framework as per approved design, double cushioned backrest, track armrests,plush seating, tapered block legs, guarding floor buffers finished with upholstery of approved shade & thickness with necessary cushioning, including one number additional cushion from renowned manufactures. The entire unit must be frabricated from renowned manufactures having valid ISO 9001-14001 & complete in all respect as per approved shade, design & direction of Engineer-In-Charge.
Supplying, fitting and fixing as per layout three-seater sofa of size [2.00m X 0.84m X 0.84m ]made of hardwood framework as per approved design, double cushioned backrest, track armrests,plush seating, tapered block legs, guarding floor buffers finished with upholstery of approved shade & thickness with necessary cushioning, including one number additional cushion from renowned manufactures. The entire unit must be frabricated from renowned manufactures having valid ISO 9001-14001 & complete in all respect as per approved shade, design & direction of Engineer-In-Charge.
Supplying, fitting and fixing at site VINTAGE/ANTIQUE looking decorative king size bed [2.10 m X 1.90 m X 0.380m H] along with decorative head [ 1.90 m X 0.60 m] made of teakwood of approved quality, the openable shutters for the internal storage to be made of teak wood at both the sides of the bed having hinges anand decorative handles of approved style & quality, all wooden surfaces to be finished with P U finish machine polish [Make - WoodTech Emporio Gold PU White Elegant Opaque PU Finish of Asian Paints] along with preparing surface including scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc. and inclusive of all operation, material and labour complete .The base for the mattress and internal storage structures only to be made of 19mm waterproof ply (IS-710), both sides of ply & all exposed edges of the ply covered with 1mm laminate pasting confirming IS Code 2046 of approved make, including all accessories . The entire unit must be frabricated from renowned manufactures having valid ISO 9001-14001, & complete in all respect as per approved colour shade, approved material specifications, design & direction of Engineer-In-Charge. ( Ply Make: Century/Green, Laminate Make: Century/Green, Locks/Hydraulic Make- Godrej/Ebbco, Wood - Teakwood)
Supplying, fitting and fixing at site as per approved layout & design the items such as : Decorative antique finish storage cabinet, luggage rack, television unit cabinet, dresser unit, study table with drawers, seating unit with internal storage. Average depth [400mm to 600mm] of various dimensions as per site & design requirements, made out of Medium Density Fiberboard (MDF) Thickness-18 mm, confirming to IS Code 12406 and internal sides covered with 1mm laminate confirming to IS Code 2046 of approved make. The external surfaces covered with teak veneer to be finished with P U finish machine polish [Make – Wood Tech Emporio Gold PU White Elegant Opaque PU Finish of Asian Paints] along with preparing surface including scaffolding and hire charges of compressor machine including cost of filler and hardener material such as P. U. Sealing, P. U. Top coat (Matt/Glossy), Thinner, Spirit etc. and inclusive of all operation, material and labour complete. The internal space of the storage to have shelves at various heights as per design requirements, along with 4mm clear glass mirror on shutters as per design requirement, and provision for fixing of decorative lighting arrangements, locking arrangements, shutters having decorative SS Handles/Brass Handles/Decorative Aluminium Handle [Size 600mm-750mm], provision of drawers with telescopic channels. The entire unit must be fabricated from renowned manufactures having valid ISO 9001-14001 & complete in all respect as per approved colour shade, approved material specifications, design & direction of Engineer-In-Charge. [Mode of measurement : Length X Height] (MDF Make: Century/Green, Ply Make: Century/Green, Laminate Make: Century/Green, Natural Teak Veneer of approved shade - 4mm of Century/Green, Locks/Hydraulic Make- Godrej/Ebbco, Wood – Teakwood)
Supplying, fitting & fixing of wall mounted TV unit with decorative open shelves - Vertical Side Cabinet - [2.10m X 0.40m X 0.60m] & decoartive bottom shelves - Horizonal Drawer Units below the TV Unit [1.70.10m X 0.40m X 0.30m] with 3 / 4 drawers having telescopic channel, SS/Brass Handles, the unit to be made with IS-710 grade plywood - 19mm waterproof ply, both sides of ply & all exposed edges of the ply to be covered with 1mm laminate pasting confirming IS Code 2046 of approved make complete in all respect as per approved shade, design & direction of Engineer-In-Charge. (MDF Make: Century/Green, Ply Make: Century/Green, Laminate Make: Century/Green, Locks/Hydraulic Make- Godrej/Ebbco, Wood - Teakwood)
Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge. (Excluding cost of glass/ panel board, 10-12 Micron thickness Annodizing film. Natural white. b) For unsupported length of vertical member above 1.50m. height of both ends of vertical member restrained but panel above 0.90 sqm
Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor [Make - Century/Green] (iii) 9mm
Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor [Make - Century/Green] (ii) 6mm
Providing, fitting and fixing Decoratve 4-6mm thick decocrative charcoal sheet planks on existing framework of 9 mm ply panelling as per the approved design, as per the manufacturer's specification and all complete as per direction, approved layout, approved colour shade & satisfaction of Engineer-In-Charge.
Supply, fitting & fixing of GYPSUM/ Pre fabricated modular moulding designed beads (2"/3"/4") for designed wall decoration as per approved design with proper fixing and finishing with necessary adhesive materials after surface preparation & labour complete for wall/ceiling as per direction of Engineer-In-Charge.
Supplying & installation of spring type/orthopedic high density HR Foam mattress of size [2.10 m X 1.90 m x 0.20 from renowned manufactures as per approved shade, design & direction of Engineer-In-Charge. (Make: Sleepwell/Kurlon)
Providing, fitting and fixing Classical/Modern Machine Made Carpet hand tuffed / soft multi colour 7-8 mm thick woolen carpet, washable and stain resistant complete in all respect as per approved shade, design approvced quality & direction of Engineer-In-Charge as per direction, approved layout, approved colour shade & satisfaction of Engineer-In-Charge.
Supply, Installation, commissioning of 4 U Network Rack, Technical Data: Conforms to DIN 41494 or equivalent standard, Construction : Welded, Front Door : Lockable Toughened Glass Door, Basic Frame : Steel, Equipment Mounting : DIN Standard Slots, Mounting Angle : 19” Mounting angles made of formed steel, Standard Finish : Powder Coated, Top and Bottom Cover : Welded to Frame, Vented and Field Cable entry exit cut outs, Standard Color : Grey, Static Load : 25 kgs, of approved make of Dlink/CP Plus/Hikvision with supporting product details as per direction and prior approval of Engineer In Charge.
Providing, fitting, fixing in position Decorative Roman Blinds / Curtains with approved upholstery/ approved design, quality & shade as approved by architect/E.I.C along with SS/aluminium pipes and as approved by competent authority of any size including all small fittings like nails, screw etc. required as per site condition and to be completed in all respect and approval of Engineer In Charge.
Supplying, fitting, fixing marble slab/tiles, 15 mm. to 18 mm. thick in dado / wall in 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement slurry @ 4.4 kg/ sq.m at the back side of marble & pointing in cement mortar (1:2) (1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of the Engineer-in-charge including cost of materials, labours, scaffolding, staging, curing complete. [White cement, Pigment to be supplied by the Agency] (iv) Area of each slab/tile exceeding 1.00 sq.m (This item to be executed on Specific permission of Superintending Engineer)
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. Sheet and galvanized with zinc coating of 150 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.L. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacture's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer-in-Charge but excluding the cost of painting with: (ISI Mark on Board)
(b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat ii) Solvent based interior grade Acrylic Primer
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer): (Two coats) (ii) Luxury Quality
Providing and fixing of factory made uPVC Sliding window (White Colour) complete, (U value=1.9-1.3 W/m 2 K, flame resistant, self extinguishing, lead free) comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (±0.2 mm) duly reinforced with G.I. section 1.6 mm (±0.2 mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5 mm Clear Annealed glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window frame will be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per as per approved drawing & direction of Engineer-In-Charge. (Note: Profile manufacturer & Window Manufacturer must be one & same, Only manufacturer Waranty is aceptable) b) 3 Track 3 Sash window frame of size 122 x 54 mm & Sash of size 64 x 47 mm both having wall thickness of 2.3 ± 0.2 mm
Supplying and fixing of decorativce designer high temperature fired ceramic vase [Type - glazed, texture, painted], Size - [Dia 8'-10" Height 10"-12"] and pvc base plate of approriate sixze, including fixng of indoor living plants with earth, fetilizers, etc all complete as per direction of Engineer-In-Charge.
Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof.In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.5mm
HIGH BACK OFFICE CHAIR Aero : Supplying and installation of ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from NABCB accredited agency), The Back is made up of injection moulded glass filed nylon & upholstered using Mesh fabric with high tenacity yarn SEAT SIZE(Larger Seat Depth): 47.0 cm (W) x 515 cm. (0)SEAT SIZE(Standard Seat Depth) 470 cm (W) x 49.5 cm. (D) *BACK SIZE: 450 cm. (W) x 65.3 cm . The HR polyurethane seat foam is moulded with density 45+/-2 kg/m² and hardness 16 ± 2 kgf as per 15:7888 for 25% compression , Up-Down adjustment-8 steps (8 00.5cm range) Height adjustable armrest structure which is Powder Coated & fitted with an armrest top with PU moulded over metal insert and Lumbar support with adjustable tilting mechanism with moulded polyurethane foam & covered with polyester fabric , the neck rest assembly has height adjustment of 4.210.6 cm and rotation adjustment of overal 70's and twin wheel castors are injection moulded in black Nylon along with supplying, fitting and fixing of seat cover of approved make and shade, with supporting product details along with authorization certificate from OEM, as per direction,proposed layout and prior approval of Engineer In Charge. (Godrej)
Supply, fitting and fixing of SOFA, MODEL – EURO V2 : 3 SEATER , The products must be manufactured from manufacturers having ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from NABCB accredited agency), BIFMA Level 2 (membership), GRIHA V.2019: criterion 30, Zero waste to landfill facility membership, IBGC Platinum Certificate & as per product applicability: the following certificates -AIOTA (as per product applicability), Green Guard (by UL- as per product applicability), Indoor Air Quality [Indoor Advantage Gold by SCS Global Services- as per product applicability], Indian Design Mark (as per product applicability), equivalent model godrej, along with seat cover towel if necessary, along with supporting product details , product authorization certificate from OEM as per direction with respect to proposed layout and approval of E.I.C. Make - Godrej.
Concealed Wiring With PVC Insulated and Sheathed Wires in Polythene Pipes - Laying & Fixing Polythene Pipe, MS Boxes, Switches etc Cutting channel of 43mm x 43mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wireas fish wire incl. mending good damages to building works 25 mm dia 3 mm thick polythene pipe without earth continuity wire
Concealed Wiring With PVC Insulated and Sheathed Wires in Polythene Pipes - Laying & Fixing Polythene Pipe, MS Boxes, Switches etc Cutting channel of 31mmx31mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hook sand supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works 13 mm dia 3 mm thick polythene pipe without earth continuity wire
Concealed Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire ‘'FR' Supplying and Drawing 1.1KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC
Concealed Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire ‘'FR' Supplying and Drawing 1.1KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC
Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire ‘'FR' – in PVC Rigid Conduit 'FR' (ISI Marked) on wall/ceiling with Modular type Switch. Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/ call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] Average run 8 mtr
Concealed Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire ‘'FR' and Modular type Switches. Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC
Supply & Fixing GI Modular Boxes, Switches etc Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 12 Module
Supply & Fixing GI Modular Boxes, Switches etc Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 6 Module
Supply & Fixing GI Modular Boxes, Switches etc Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 2 Module
Supply & Fixing GI Modular Boxes, Switches etc Supply & Fixing 240 V, Modular type switch Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required Zone: All Districts of West
Supply & Fixing GI Modular Boxes, Switches etc Supply & Fixing 240 V, Modular type switch Supply & Fixing 240 V 16 A Modular type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required
Supply & Fixing GI Modular Boxes, Switches etc Supply & Fixing 240 V, Modular type plug socket Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supply & Fixing GI Modular Boxes, Switches etc Supply & Fixing 240 V, Modular type plug socket Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supply & Fixing GI Modular Boxes, Switches etc Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supply and fixing of GreenLED Ultima Square (6" x 6") , incl cutting the false ceiling in reqd dimensions also the wiring and connection of the light by 1.5 sq mm cu wire complete. Make : Philips, 10 watt square/ round
Supply and fixing of SkyCove LED Strip Light (5M length) with driver and necessary connection. Make : Philips , LED Strip SKYCove 5M WW with driver
Fan & Fan Clamps Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length
Supply, installation, testing & commissioning of suction/discharge copper pipe line in split air conditioning unit 1.0/1.5 TR/2 TR/3 TR capacity including brazing, nitrile rubber insulation 6/9mm thick class 'O', etc complete as required. Copper tube 1/4"
Supply, installation, testing & commissioning of suction/discharge copper pipe line in split air conditioning unit 1.0/1.5 TR/2 TR/3 TR capacity including brazing, nitrile rubber insulation 6/9mm thick class 'O', etc complete as required. Copper tube 3/8"
Supply, installation, commissioning of IP 4 Mega Piexel Dome/Bullet night colour VU, Camera Specification- DS-2CD1327G0-L(UF)- CameraImage Sensor 1/2.8" Progressive Scan CMOS, Min. Illumination Color: 0.001 Lux @(F1.0, AGC ON), 0 Lux with white light, Shutter Speed 1/3 s to 1/100, 000 s , Slow Shutter -Yes,Wide Dynamic Range, Digital WDR,Angle Adjustment, Pan: 0° to 360°, tilt: 0° to 75°, rotate: 0° to 360°, Lens Specifiaction Focal Length & FOV 2.8 mm, horizontal FOV 105.2°, vertical FOV 56.5°, diagonal FOV 125.1° 4 mm, horizontal FOV 83.6°, vertical FOV 46.2°, diagonal FOV 97.5°, Lens Mount- M12, Focus-Fixed,Aperture-F1.0, DORI-2.8 mm, D: 44.1 m, O: 17.5 m, R: 8.8 m, I: 4.4 m 4 mm, D: 53.4 m, O: 21.2 m, R: 10.7 m, I: 5.3 m, Safety - UL (UL 60950-1); CB (IEC 60950-1:2005 + Am 1:2009 + Am 2:2013, IEC 62368-1:2014); CE-LVD (EN 60950-1:2005 + Am 1:2009 + Am 2:2013, IEC 62368-1:2014); BIS (IS 13252(Part 1):2010+A1:2013+A2:2015) , Environment-CERoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No 1907/2006)of approved model of Hikvision/Honeywell/ Dlink/CPplus with supporting product details along with authorization certificate from respective OEM, as per direction and prior approval of Engineer In Charge.
Supply, installation, commissioning of 16 Channel POE 2 uplink, 16-Port 100 Mbps Long-Range Unmanaged PoE Switch DS-3E0318P-EL/M(B) with specifications Network parameters - Port number, 16 × 100 Mbps PoE+ ports, 1 × 1000 Mbps RJ45 port, and 1 × 1000 Mbps SFP fiber optical port Port type - RJ45 port, full duplex, MDI/MDI-X adaptive Standard - IEEE 802.3, IEEE 802.3u, IEEE 802.3x, Forwarding mode Store- and-forward switching Working mode, Standard mode (default); Extend mode - High priority ports, Ports 1 to 8, Ports for long-distance transmission (PoE+) Ports 1 to 16, MAC address table - 4 K, Switching capacity - 7.2 Gbps, Packet forwarding rate - 5.356 Mpps, Internal cache 2.75 Mbits, PoE power supply- PoE standard IEEE 802.3af, IEEE 802.3at PoE power pin - 1-16 support 8-core power supply - PoE+ port Ports 1 to16 Max. port power 30 W, PoE power budget -130 W, Max. power consumption 150 W, Approval EMC FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN 61000-3-3: 2013, EN 55024 2010 +A1: 2015); RCM (AS/NZS CISPR 32: 2015); IC (ICES-003: Issue 6, 2016) Safety UL (UL 60950-1); CB (IEC 60950-1:2005 + Am 1:2009 + Am 2:2013); CE-LVD (EN 60950-1:2005 + Am 1:2009 + Am 2:2013) Chemistry CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No 1907/2006) of approved model of Hikvision /Tplink /Dlink/ CPplus with supporting product details as per direction and prior approval of Engineer In Charge.
Supply, Installation, commissioning of Surveillance Internal Hard Drive HDD 4TB, Capacity 4TB , Interface SATA 6.0 Gbit/s, Form Factor 3.5-inch, HDWT140UZSVAR, HDWT140UZSVA, Number of Cameras Supported 32, Driver Bays Supported 1 to 8, Rotational Speed [RPM] – 5400, 24x7 Operation – Yes, S300 ,Vibration (Operating) 7.35 m/s_ {0.75G} (5 to 300Hz) 2.45 m/s_ {0.25G} (300 to 500Hz) of approved model of Segate/LG/Western Digital/Toshiba with supporting product details as per direction and prior approval of Engineer In Charge.
Providing,laying, fixing of Cat6 cable with charateristic impedence 100+- 15 Ω, Mechanical properties as approved, Frequency 250MHz, Transmission Speed 1000 Mbps, NCB-C6UGRYR-100/NCB-C6UGRYR-305 , of approved make of Dlink/Digilink/Finolex with supporting product details as per direction and prior approval of Engineer In Charge.
Custom made Pelmet on the window side to support AC Fittings/Hanging of curtains, made out of 19mm water proof ply (IS-710) finished with 1.0mm laminate on both the sides, edge to be finished with lamonate of matching shade & rate to include 25x38mm hardwood frame for support through out the length and all complete as per direction, approved layout, approved colour shade & satisfaction of Engineer-In-Charge.
Supply, Installation, commissioning of 2 U Network Rack, Technical Data: Rack Standard : Conforms to DIN 41494 or equivalent standard, Construction : Welded, Front Door : Lockable Toughened Glass Door, Basic Frame : Steel, Equipment Mounting : DIN Standard Slots, Mounting Angle : 19” Mounting angles made of formed steel, Standard Finish : Powder Coated, Top and Bottom Cover : Welded to Frame, Vented and Field Cable entry exit cut outs, Standard Color : Grey, Static Load : 25 kgs, of approved make of Dlink/CP Plus/Hikvision with supporting product details as per directionand prior approval of Engineer In Charge.
CONDUIT & CASING of standard approved make as per direction and prior approval of Engineer In Charge.
Supply, installation, testing and commissioning of LED TV by 139 cm (55 inches) 4K Ultra HD Smart LED display Google TV with Alexa compatibility, OS, WEBOS/ANDROID or equivalent, minimum 60 Hz refresh rate, minimum 20W speaker, Wifi/Bluetooth enable, 3HDMI & 2 USB ports, comprehensive standard warranty of 1 (One) or higher year, remote controlled with wall mount bracket and all accessories at Jalasampad Bhawan Resolution: 4K Ultra HD (3840 x 2160), Refresh Rate: 60 Hertz. 178 Degree wide viewing angle.cONNECTIVITY : 3 HDMI parts of connect set top box Blu Ray players, gaming console. 2 USB ports to connect hard drives and other USB devices Sound: 20 Watts Output, Open Baffie Speaker, Dolby Audio, Clear Phase.Smart TV Features: Google TV. Watch list Voice Search, Google Play, Chrome cast Netflix, Amazon Prime Video, Additional Features: Apple Airplay, Apple Home kit, Alexa. Display: xi 4k procesoor , 4k HDR, lIVE COLOUR 4K X rEALITY PRO mOTION fLOW X r200
Installation, Testing & Commissioning ( CCTV related item) of all equipments to the satisfaction of the Engineer-in-charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.49 MB
BARCHART.pdf
Tender Documents • 0.66 MB
WB2911.pdf
Tender Documents • 0.79 MB
BOQ_2461110.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid