MGNREGS MATERIAL SUPPLY

Amount

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Bitumen washer

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 20 mm

Bright finished or black enameled mild steel screws 40 mm

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Coarse sand (zone III)

Epoxy paint

Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile

Fine sand (zone IV)

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

G.I pipes 50 mm dia

G.I. pipes 40 mm dia

Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots

Galvanised steel J or L hooks 8 mm dia

Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm

GI trafford profile sheet 0.35mm thick

Mild steel tubes hot finished welded type

Multi surface paint

Oxidised mild steel screws 30 mm

Oxidised mild steel tower bolt (barrel type) 250x10mm

Portland Cement

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

PVC bend 110 mm dia

PVC bend 63 mm dia

PVC door Elbow 63 mm dia

PVC door Tee 110x110x110 mm dia

PVC door Tee 63 x63x63mm dia

PVC pipe 110 mm outer dia 6kgf/cm2

PVC pipe 20 mm outer dia 12 kgf/cm2

PVC pipe 63 mm outer dia. 4 kgf/cm2

PVC vent cowl 110 mm dia

PVC vent cowl 63 mm dia

Red oxide Zinc chromate primer

Second class teak wood in planks

Second class teak wood in scantling

Solid blocks of size 40x20x15cm

Special primer (C.W)

Stainless steel screws 50 mm

Stone Aggregate(single size): 10 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Stone for masonry work

Sundries (binding wire,cover block,sand paper,cutting blade etc)

Twisted steel/deformed bars

Vitreous china pedestal type water closet

Vitrified floor tile 60x60 cm

Water proof ply 12 mm thick

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Welding by electric plant

Wire nails

VISHNU S T (BID ID -2071061)

Biju V (BID ID -2071098)