Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.5 LAccepted-AOC 05 AYODHYA NAGAR NEAR RAM MANDIR BEHIND HARIYA COLLEGE GOKUL NAGAR JAMNAGAR 361004 | JAMNAGAR | JAMNAGAR | GUJARAT | 361004 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹45.8 L+₹6.3 L (15.8%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹49.7 L+₹10.1 L (25.7%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
8 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Sumukh Swaroop
Military Engineer Service Garrison Engineer (AF) No.1 Air Force Station No 1 Jamnagar 361003
ADDN ALTN TO A TECHNICAL BULIDING AND WATCH TOWERS AT AIR FORCE STATION SAMANA UNDER GE (AF) JAMNAGAR NO 1
2024_MES_673419_1
8305/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
Samana under Jamnagar
6 documents required · 6 mandatory
₹500
GE (AF) Jamnagar No. 1
₹86,000
Yes
26 Oct 2024
10 Sept 2024
10 Oct 2024
10 Sept 2024
8 Oct 2024
24 Sept 2024
Amount
M&L for complete removal of existing treatment of any thickness laid over RCC Roof / chajja, cleaning and washing of roof with water to remove dust etc as preparation to receive treatment, brooming down or steel wire brushing, scraping down smoke soot, mouls, moss and efflorescent salts and treating oil and greasy spots complete all as specified and as directed.
M&L for brushing neat cement slurry with 3.0kg of cement per square metre complete all as specified and directed.
M&L for Cement concrete in roof pading, coving, filling and mass concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) complete all as specified and directed
M&L for Cement concrete in roof pading, coving, filling and mass concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) complete all as specified and directed
M&L for plastering 10mm thick on concrete surface in CM 1:4, finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacture instruction complete all as specified and directed Note Supply only liquid water proofing compound will be measured & paid separately.
Supply only liquid integral water proofing chemical complete all as specified and directed.
M&L for waterproofing treatment by water proofing liquid after proper cleaning of the new surface free of dust and applying the first coat (By Brush only)@ 4 - 4.5 Sqmt/Lit , allowing it to dry for 24 hrs and applying the second coat over it on horizontal and vertical surface all as specified and directed. Note: Application shall be carried out through authorised applicator of manufacturer only and as per guidelines of Manufacturer strictly. Make: Sunshield 100 of M/s Choksey, FOSROC or equivalent as approved by GE.
Taking down cement plaster of any thickness in cement or cement lime mortar on brick or stone or concrete walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 km but n.exc 2 Km, complete all as spd and directed Note:- Quoted rate deemed to carryout work at height upto 8.00 m
M&L for rendering 15 mm thick on stone masonary or concrete block surface of walls in cement mortar 1:6 finished even and smooth without using extra cement complete all as spd and directed
M &L 2 coats of oil bound distemper on new surfaces of walls including preparation to distempering to match with existing work complete all as specified and directed
M & L rendering 10 mm thick in patches on fair faces of brick or concrete surfaces in CM 1:3 as on ceiling, facia roof projection etc finished even and smooth without using extra cement as directed by Engineer-in-Charge.
M &L 2 coats of oil bound distemper on new surfaces of ceiling including preparation to distempering to match with existing work complete all as specified and directed
M&L for rendering 15 mm thick on stone masonary or concrete block surface of walls in cement mortar 1:4 finished even and fair complete all as specified and directed Note:- Quoted rate deemed to carryout wk at height upto 10.00 m
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) and any pattern with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces walls/fins/facia/soffit/chajja etc complete all as specified and directed Note:- Quoted rate deemed to carryout wk at height upto 10.00 m
M&L for Preparation of old distempered / decorated surfaces of walls and applying Two coat of Distemper oil emulsion complete as specified and directed.
M&L for Preparation of old distempered / decorated surfaces of ceiling and applying Two coat of Distemper oil emulsion complete as specified and directed.
Supply & fix Fibre glass mesh of 145 gsm for plastering work etc complete all as spd all directed
Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and assesories etc. Note:- Quoted rate deemed to carryout work at height upto 8.00 m
S&F 600x600mmx4mm thick false ceiling of Non esbestos fibre cement building boards (E Board) and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 605mm X 605mm . The aluminium frame work will be supported on side wall with the use of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified directed by the Engineer-in-Charge. Note:- Quoted rate deemed to carryout wk at height upto 8.00 m
S&F in repair Curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified & directed.
Dismantling of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to a distance exc 1.5 km but n.exc 2 Km complete all as specified and directed.
M&L Rendering 10mm thick in CM 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing for skirting/dado etc complete all as specified and directed
M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specifiedand directed
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as spd and directed
M&L for Non skid, coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc laid over and pointed with coloured cement to match the tiles complete all as specified and directed
M&L 15 -18mm thick granite stone slab of any type (cut, table rubbed and polished)in steps, jambs, pillars, window cills, cooking platforms and like , bedded & jointed with grey cement slurry & pointing with coloured cement using marble dust with admixture of pigment to match with marble shade; laid over complete all as specified and directed
M&L Green Marble work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as spd and directed
Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed
S&F 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as spd and directed
S&F 32mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
S&F in repair 15mm size angular Stop valves, CP, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spd and directed
S&F in repairs fancy type chromium plated, long shank & cup (concealed type) 15mm bore dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spd and directed
S&F in repair 15mm dia size Bib taps, CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as spd and directed
S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spd and directed
S&F in repair chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge
S&F in repair Chromium Plated Grating doom 100mm dia with or without hole complete all as specified and directed.
S&F in repair vitreous china wash basin, white, Table top, size 540 mm x 360 mm x 115mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including waste fitting and union complete all as specified and directed by Engineer-in-Charge Make :- Cera or Equivalant
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as spd and directed
S&F in repair vitreous china two piece wall hung extended EWC white with CI 'P' or 'S' trap including attached cistern, water closet seat cover of plastic, etc.complete including necessary PVC waste pipe fitting, complete all as specified and directed by Engineer-in-Charge Make :- Cera or Equivalant as specified
S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe including lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engineer-in-Charge
S&F in repair 10 Litre capacity PVC symphonic action type flushing cistern, duel flush type (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as specified and directed
S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed
S&F in repair Vitreous China waterless Urinal, white , complete including providing and fixing waterless key valve with key adopter & nutplugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; complete all as specified and directed Make :- Cera or Equivalant as specified
S&F in repair brass chromium plated shower rose 100 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed by Engineer-in-Charge
S & F in repair Tubular towel rail, 20mm dia, D type, 600mm long between flanges chromium plated complete all as spd and directed
S&F in repair Towel Ring of CP fixed with and including chromium plated brass screws and wooden/ plastic cleats etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs PVC waste pipe flexible type suitable for couplings 32 / 40 mm dia and 750 mm long complete all as spd and directed
S&F in repairs toilet paper holder complete all as specified and as directed.
S&F in repairs sinks made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including supply and fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as spd and directed
S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors in repair complete all as specified and directed
S & F 75 mm bore of pipe PVC (SWR) bends of any radius fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge
S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed
S & F 110 mm bore of pipe PVC (SWR) bends of any radius fixed to PVC pipes provided with access door in repair complete all as specified and directed by Engineer-in-Charge
M&L for 75 mm dia of PVC (SWR) floor trap plain with grating incluing jointing with solvent cement in repair complete all as specified and directed by Engineer-in-Charge
M&L for Cutting holes in brick / stone / PCC Block walls built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required
Taking down chowkats or frame with shutter of any description (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed Engineer-in-Charge
S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed
Taking down shutter of any description n exc 1.00 sqm each complete all as specified and directed by Engineer-in-Charge
Taking down shutter of any description exc 1.00sqm but n exc 2.00 sqm each complete all as specified and directed by Engineer-in-Charge
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each
Taking down aluminium / steel windows / ventilators with shutters and frames including glass panes/ wire guage, etc., complete, as directed.
S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
S&F 30mm thick flush shutter, solid core construction with particle board core and ply woood face panels commercial type on both side complete all as specified and directed Engineer-in-Charge
S&F 35mm thick flush shutter, solid core construction with particle board core and ply woood face panels commercial type on both side with 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed on both sides of shutterwith approved adhesive as per manufacturer's instructions complete all as specified and directed Engineer-in-Charge
S&F 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
M&L for preparing new surfaces of wood or wood based materials of any description not other wise described over 10 CM width or girth new or previously un treated wooden surfaces and applying one coat of pink primer and two coat of synthetic enamel paint complete all as specified & directed.
S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.
S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.
S&F 125 mm in size aluminium handles cast type anodized complete all as specified & directed.
S & F 250 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed by Engineer-in-Charge
S&F door closer hydraulically regulated designation No 2, aluminium (Die cast) body, universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg fixed in repair complete all as specified & directed.
S&F 200mm, ordinary MS rat tail rod pattern springs including roller and roller plate in repair complete all as specified & directed.
S& f aluminium powder coating of any color ( thickness of powder coating not less than 50 micron) frame for door,window and ventilators or similar wk with one or more rebate inc joining cleat for fixing in repair complete all as specified and directed by Engineer-in-Charge
S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ handles/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Weight of aluminium sections, fittings & fixtures shall only be measured and paid for under this item. Cost of gasket, etc., is deemed to be included in the quoted rates and shall not be measured and paid for separately.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge
S&F in repair aluminium three track Powder coated of any color ( thickness of powder coating not less than 50 micron) sliding window with three sliding shutter , the size of outer frame three track 92 x 31.5x 1.20mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 4 mm thick glass ( plain/floated) including all-around suitable rubber gasket and MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and directed by Engineer-in-Charge
S&F aluminium door shutters powder coated of any color ( thickness of powder coating not less than 50 micron), alumimnium section weighing min. 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc in repair complete all as specified.directed by Engineer - in - Charge.
S&F in repairs aluminium window and ventilator shutters or aluminium partition, powder coated of any colour (Thickness or powder coating not less than 50 micron),fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed by Engineer-in-Charge
Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames or stone, concrete or brick surrounds, including punching or drilling out glazing pins / spring clips and providing and fixing new ones, glazed with putty or fixed with beads
S&F sheet glass 4 mm thick ordinary quality (plain/floated/frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square exc. 0.5 sqm in each pane complete all as specified & directed.
S&F figured glass 4 mm thick pin headed type and glazing with oil putty / wooden beads / aluminium glazing clip in squares n.exc 0.5 sqm in each pane all as specified complete all as specified & directed.
S&F in repair MS louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti for adjusting the louvers fixed in Aluminium ventilators with screws etc complete all as specified and directed by Engineer-in-Charge
S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed by Engineer-in-Charge
S & F in repair floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge
S & F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge
S & F brass 4 lever Mortice lock, vertical type, size 100 mm
M&L for preparation of old painted wooden /board surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint all as specified and as directed by Engineer-In-Charge.
Demolition of RCC of any descrition such as Kitchen chimniy, chajja, shelves, OHT Tanks,Pilar,wall, column.beam etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)Note:- Quoted rate deemed to carryout wk at height upto 8.00 m
Reinforced cement concrete type B1 1:2:4 using 20mm aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves, chajja, lintel and similar wks complete all as specified and directed by Engineer-in-Charge Note:- Quoted rate deemed to carryout wk at height upto 8.00 m
S&F mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge
Form work to soffits of suspended slab such as roof slab, floor slab , landing, chajjas, lintel and similar work for rough finish surface.complete all as specified and directed by Engineer-in-Charge Note:- Quoted rate deemed to carryout wk at height upto 8.00 m
Dismantling water tanks exc 250 ltr and n.exc 500 ltr and removing to store complete all as spd and directed
S&F 500 ltrs capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed
S&F in repair 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed
S&F CPVC ball valve suitable for 32mm outer dia pipe complete all as specified and directed by Engineer-in-Charge
Demolition of ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling etc fixed in cement mortar including all quoins, pillars, arches etc. all as specified and as directed. ( Note - Quoted rates are deemed to include for execution of work up to 10 metre height)
M&L for providing precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars or kerbstone all as specified and directed. ( Note - Quoted rates are deemed to include for execution of work up to 10 metre height)
M&L for providing cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, coping etc, complete all as specified
Dismantling wrought iron or mild steel work of any description not otherwise provided for.
S & F Steel work in tubular/rectangular MS Pipe such as vertical post,trusses, rafter, purlins etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240 complete all as specified and directed Engineer-in-Charge
S&F Plates (Plain or chequered) channels,squarecut or notched (ordinary and counter sunk) forming holes, w/o any attachment conforming to FE-410-W( Gde-E-250 )quality -Acomplete all as specified and directed Engineer-in-Charge
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, flat sections or plates etc) including distance pieces, cleats etc. Fe 410 -W (Gde-E- 250) quality- A complete all as specified and directed
S&F mild steel framed work such as chhajja frames, grills, gratings etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165
Supply & Fix 06 mm thick plain, multicavity poly carbonate sheet (coloured) in roof covering, fixed with and including aluminium fillets at joints and aluminium angles at the end, fixed with self drilled screws and standard fittings, fixtures and accessories in repair complete all as specified and as per manufacturer's instructions.
Supply & Fix Pre- painted galvalume aluminum zinc coating GI based corrugated / plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for preparation of new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide.
Taking down carefully any aluminum /copper point wiring (light,fan,socket or power) complete including conduits/casing caping with the materials/debris and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed.
Taking down carefully by unscrewing from fitting and fixtures as switches,ceiling roses, pendents,regulators,bells, sockets, tube light fittings etc, removing the materials/debris and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed
Taking down carefully by unscrewing fitting and fixtures as switches, ceiling roses, pendents, regulators, bells, sockets, tube light fittings, DB,MCB etc, and refixing at the same or other place all as directed. ( To be measured only when found serviceable in all rspect for reuse all as specified and as directed)
Taking down sub main wiring of three core PVC cable PVC insulated 2.5 Sqmm/ 4 Sqmm/ 6Sqmm/ 10 Sqmm including casing & caping or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc. as directed and specified by Engineer-in-Charge
Material & Labour for point wiring with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn and including PVC casing caping, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc including sheet metal flush box suitable complete for following:
One Light / Fan / Exhaust fan point controlled by one switch
One 3 Pin socket outlet 5 Amp point controlled by one switch on independent board.
Material & Labour for point wiring with 4 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn and including PVC casing caping, including all accessories like bend, tees, junction boxes etc. including 4 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc for 15 Amp multi purpose socket outlet on independent board, including sheet metal flush box complete.
S & F switch Piano 5 Amps, flush button type, SP, one way, 230 Volts complete. Make - Leader/Anchor/SSK/ as specified all as approved.
M & L ceiling rose polycarbonate body 6 Amps, 250 volts AC three Terminals complete all as specified.
S & F in repairs switch socket combination 2 in 1, multipurpose, 5 pin 6 Amps , flush type, 230 / 250 Volts,
S & F in repairs switch socket outlet combination 2 in 1, poly carbonate body combination, 6 A / 16 A - 230 Volts, multipurpose including connecting.
Supply & Fix energy efficient LED tube light fitting with built in LED & integral LED drive 20 watt, channel housing & diffuser of length 800 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.
Supply & Fix energy efficient LED tube light fitting with built in LED & integral LED drive 20 watt, channel housing & diffuser of length 1200 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.
Supply & Fix energy efficient LED tube light fitting with built in LED & integral LED drive 10 watt, channel housing & diffuser of length 600 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.
Supply and Fixing Energy Efficient recessed mounted LED luminarie 600x600 false celing light 36 watt complete including connection. Make Phillips complete or equivalent in Wipro/Crompton
Supply and fix Exhaust Fan in replacement 230V Single Pole 250 mm 1400 RPM sweep with louvers plastic body fixed as per manufacturer instruction connecting with and including 1.5 Sqmm copper conductor,PVC insulated and PVC seathed 3 core cable including making suitable size hole in brick/PCC block masonary wall built in CM and making good disturbed surface complete. Make: Havells or equivalent of make Bajaj/crompton/usha.
Taking down and re-fixing , re- installing , testing fire alarm system with , smoke detectors, heat detectors, alarm, manual call point ,conventional sounder, Response indicators with its wiring and acessories as per directed by Engineer in charge
S&F LED building security light fitting 35 Watt, system efficiency not less than 100 lumen / Watt, IP66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment , Heat resistance toughened glass fitted in cast aluminium housing with SS screws, pipe, bracket on building,
S&F LED flood light fitting 200-210 watt, high efficiency, IP 65 protection, consisting of high / low voltage cut off, maintenance free, isolated electronic driver circuits, low THD, PMMA grade, high quality transmittance lens, epoxy coated powder coated die cast aluminium housing with weather proof gasket for lamp and driver compartment, heat resistant, toughened glass fitted in cast aluminium housing with SS screws fixed with suitable brackets & connecting including taking down old light fittings of any desription, complete as directed.
Taking down old flood light fittings of any desription with connecting items like brackets, nuts, bolts, et., complete all as directed by Engineer in charge.
S&F in repairs DB MCB, two pole, metal enclosure sheet with on single pole MCB, 20 Amp rating, 240 Volts.
Supply and fix in repair distribution board made of sheet metal enclosure (CRCA sheet), dust & vermin proof, SPN, 8 way, with 200 Amp rate copper bus neutral bar, earth bar, IP 43 protection, SPN 230 volts, double door, fixed flush to wall complete.
Supply and fix in repair MCB Single pole Neutral 240 volts 40- 63 Amps (to be fixed as per load requirement) 220V with 'C' curve complete as including all connectionsas directed by engineer in charge
Supply and fix in repair MCB single pole 240 volts 6 to 32 Amps (to be fixed as per load requirement) 220V with 'C' curve complete as including all connectionsas directed by engineer in charge
M & L for sub main wiring with two single core PVC insulated and unsheathed cable 4 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC conduit not less than 25 mm complete with all accessories along with provn of 4 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire and connecting to tbe BD with proper size of lugs/thimbles etc comnplete all as specified and directed.
M & L for sub main wiring with two single core PVC insulated and unsheathed cable 2.50 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC conduit not less than 20 mm complete with all accessories along with provn of 2.50 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire and connecting to tbe BD with proper size of lugs/thimbles etc comnplete all as specified and directed.
Sagathiya Builders (BID ID -3132147)
Jagdamba Engineering (BID ID -3132204)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .