Construction of Veterinary Dispensary at Dodra in Tehsil Dada Siba, District Kangra (HP). (SH. Construction of Building Portion including water supply and sanitary installation)

Amount

Excavation in foundation trenches etc. in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts.

Excavation in drains and channels etc. in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, pick jumper blasting work, hard blasting work including chiseling or wedging out rock where blasting is prohibited and doing work in saturated soil including cost of shoring, strutting and pumping or bailing out water (surface and sub soil water) upto any depth and any quantum of water including clearing of slush which may arise out during dewatering including dressing of sides and bed and disposing of all excavated earth up to any leads and lifts, disposed earth to be levelled and neatly dressed as per directions of The Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and filling brick bats/stone aggregate in soak pit complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing from work with steel plates 3.15mm (Three decimal one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etc. up to any thickness, up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing from work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level, including carriage of materials within all leads, lifts and other incidentals.

Providing from work with steel plates 3.15mm (Three decimal one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, excluding the cost of form work in foundation and plinth/under floors in all depths including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specifications or as directed by the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (Twenty millimeters) nominal size) including curing complete excluding the cost of form work in foundation and plinth up to all heights/depths including pumping or bailing out water, dewatering up to any depth and any quantum of water complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimeters) nominal size) mix designed so as to give a compressive strength corresponding to Grade M-20 (M-Twenty) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landings and shelves and their supports, balconies, beams, girders, bressumers cantilevers and the like in all depths/thickness slab over septic tank and rain harvesting tank, upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) mix designed so as to give a compressive strength corresponding to grade M-20 (M-twenty) reinforcement concrete chhajjas of any thickness and upto all floor level, including finishing the exposed surface with cement mortar 1:3 (one cement isto three sand) to give a smooth and even surfaces, including centering/form work and curing complete, excluding the cost of reinforcement complete, as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals due for its completion up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in foundation and plinth with cement mortar 1:6 (one cement isto six sand) including carriage of materials within all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) including carriage of materials within all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in foundation and plinth in mud mortar complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (un coursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement is to six sand is to twelve graded crushed stone aggregate 20mm (twenty millimeter) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth upto all heights/depths including pumping or bailing out water/dewatering including racking out joints in cement mortar 1:5 (one cement isto five sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing second class deodar wood work in frames of door, windows clearstory windows and other frames, wrought framed and fixed in position complete including carriage of material within all leads, lifts and other incidentals, the rate including Royality Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 40mm (forty millimeter) thick second class Deodar Wood paneled glazed or paneled and glazed shutters for doors, windows and clearstory windows including black enameled iron butt hinges, with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 40mm (forty millimeter) thick second class Deodar Wood wire gauze shutters using galvanized MS wire gauze of IS gauge designation 85-G (eighty five-G) with wire of dia 0.56mm (zero point five six millimeters) for doors, windows and clearstory windows including bright finished black enamelled iron butt hinges, with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government

Providing and fixing 4mm (four millimeters) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and fillets to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals. The rate including Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimeters) thick and 150mm (one hundred fifty millimeters) wide first class Deodar wood pelmet with 25mm (twenty five millimeters) diameter wooden curtain rods and brackets including fixing 25x3mm (twenty five into three millimeters) M.S. flat 10cm (ten centimeters) long, plugs and necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing plain M.S. grills of required pattern in wooden frames of window etc. with M.S. flat, square or round bars with round headed bolts and nuts or by screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing 40x3mm (forty into three millimeters) flat iron hold fast 40cm (forty centimeters) long including fixing to frame with 10mm (ten millimeters) dia meter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 (thirty into ten into fifteen centimeters) 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm (twenty millimeters) nominal size complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government. 300x16mm (three hundred into sixteen millimeters).

Providing and fixing anodized aluminum sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government. 250x16mm (two hundred fifty into sixteen millimeters).

Providing and fixing aluminum tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government. 200x10mm (two hundred into ten millimeters).

Providing and fixing aluminum tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government. 100x10mm (one hundred into ten millimeters).

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any other taxes imposed by the Government. 125mm (one hundred twenty five millimeters).

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any other taxes imposed by the Government. 100mm (one hundred millimeters).

Providing and fixing 125mm (one hundred twenty five millimeters) oxidized M.S. double acting spring hinges with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) bright finished brass floor door stoppers with rubber cushion and necessary screws etcetera to suit shutter thickness complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government.

40mm (Forty millimeters) thick cement concrete flooring 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeters) nominal size) laid in one layer finished with a floating coat of neat cement and curing complete up to all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 40mm (forty millimeters) wide and 4mm ( four millimeter) thick glass strips in joints of cement concrete floors complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads lifts and other incidental. The rate inclusive of Octroi, toll tax or any other taxes imposed by the Government.

15mm (fifteen millimeters) thick cement plaster skirting or dado up to all heights with cement mortar 1:3 (one cement isto three sand) finished with floating coat of neat cement including rounding of junctions with floors and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 ( one cement : three sand) complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing pre painted steel sheet roofing over steel section, kolermetal or equivalent make pre painted sheet skin trapezoidal profile sheeting 0.60mm (zero point six zero millimeters) thickness having 1060mm (one thousand sixty millimeters) cover width, overall width 1126mm (one thousand one hundred twenty six millimeters), 28mm (twenty eight millimeters) crest depth at 353+2mm (three hundred fifty three plus two millimeters) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimeters). The main crest width at top of 25mm (twenty five millimeters) and at lower 81mm (eighty one millimeters) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyster coating of approved shade and balancing reverse coat with polyster paint, including fixing of sheet with self drilling and self tapping screws of size 5.5mm (five point five millimeters) dia and 5.5 mm (five point five millimeters) length with EDPM seal complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate including Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 0.63mm (zero pint six three millimeters) thick plain GI (galvanized iron) sheet 15cm (fifteen centimeters) wide 45cm (forty five centimeters) deep over all semi-circular gutter with iron brackets 40x3mm (forty into three millimeters) size, bolts, nuts and washers etc. complete including making necessary connections with rain water pipe complete as per design/drawings complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level including carriage of materials within all leads, lifts and other incidentals. The rate inclusive Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (sixty centimeters) over all, with kolermetal or equivalent make pre painted single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimeters) thickness having 1060mm (one thousand sixty millimeters) cover width, overall width 1126mm (one thousand one hundred twenty six millimeters), 28mm (twenty eight millimeters) crest depth at 353+2 mm (three hundred fifty three plus two millimeters) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimeters). The main crest width at top of 25mm (twenty five millimeters) and at lower 81mm (eighty one millimeters) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyster coating of approved shade and balancing reverse coat with polyster paint, including fixing of sheet with self drilling and self tapping screws of size 5.5mm (five point five millimeters) dia and 5.5 mm (five point five millimeters) length with EDPM seal complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate including Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 1.66mm (one point sixty six millimeters) thick B.P sheet in eaves boards/soffits/facia 200mm (two hundred millimeters) wide complete including frame of 40x3mm (forty into three millimeters) M.S flat welded to steel roof member and applying a coat of red lead primer and placing in position complete including carriage of materials within all leads, lifts and other incidental. The rate inclusive Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing on wall faces ISI marked 100mm (One hundred millimeters) diameter Cast Iron rain water pipes including filling the joints with spun yarn and cement mortar 1:2 (one cement isto two sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) dia meter M.S holder bat clamps of approved design to C.I or S.C.I pipes embedded in and including cement concrete block 10x10x10cm (Ten into ten into ten centimeter ) of 1:2:4 (one cement isto two approved sand isto four graded crushed stone aggregate 20mm (twenty millimeters)) nominal size and cost of cutting holes and making good the wall etc. complete as per HPPWD specifications, including carriage of materials within all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing on wall face 100mm (one hundred millimeters) diameter cast iron plain bend for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (one cement isto two approved sand) including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing on wall face 100mm (one hundred millimeters) diameter cast iron plain shoes for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (one cement isto two approved sand) including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etc. as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Toll Tax Sales tax or any other taxes imposed by the Government:- In gratings, framed guard bars, ladders, railing brackets and the like ceiling frames etc.

Steel work welded in built up sections trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etc. as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Toll Tax Sales tax or any other taxes imposed by the Government:- In trusses and trussed purlins in buildings.

Providing and fixing M.S (Mild steel) fan clamp type-I of 16mm (sixteen millimeters) dia M.S (Mild steel) bars bent to shape with hooked ends in RCC slab during laying trusses including painting the exposed portion of loop, all as per standard design complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Applying priming coat over new steel and other metal surfaces with ready mixed priming paint brushing red lead, red oxide/zinc oxide chrome of approved brand and manufacture (Narolac /Asian paints) after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes/fine steel wool scrapers and sand papered complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Painting two coats (excluding priming coats) on new steel and other metal surfaces with enamel paint of approved brand and manufacture (Narolac/Asian paints) and of approved shade brushing to give an even shade including cleaning of surface of all dirt, dust and other foreign matter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture (Narolac/Asian paints) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enemel paint of approved brand and manufacture (Narolac/Asian paints) and of approved shade to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Applying priming coat on new concrete/masonry/ asbestos cement/plastered surfaces after and including preparing the surface a thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with ready mixed primer of approved brand and manufacture (Narolac/Asian paints) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Spray painting two or more cats (excluding priming coat) on new concrete/ plastered/ asbestos cement surfaces with flat oil paint of approved brand and manufacture (NEROLAC/ASIAN PAINT) and of approved shades to give an even shade including preparing carriage of material within all leads, lifts, and other incidental. The rate including Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering up to all floor levels, including arises, internal rounded angles, chamfers and/or rounded angles, in all girth and finished even and smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

15mm (fifteen millimeter) thick cement plaster with cement mortar 1:3 (one cement isto three sand) in single coat on fair side of brick/concrete/stone walls for interior plastering up to all floor levels, including arises, internal rounded angles, chamfers and/or rounded angles, in all girth and finished even and smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture (Nerolac/Asian or equivalent make) and of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper, primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth and carriage of material within all leads, lifts and other incidental. The rate including Octroi, Sales tax, Toll tax or any other taxes imposed by the Government.

Distempering (two or more coats) with dry distemper of approved brand and manufacture ((NEROLAC/ASIAN PAINT) (two coats) and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth including carriage of material within all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Sales tax, Toll tax or any other taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture (Nerolac Surksha/Apex exterior) and of approved shade on undecorated wall surfaces (two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing plinth protection 50mm (fifty millimeters) thick cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate) 20mm (twenty millimeters nominal size) including finishing the top surfaces of concrete smooth as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm(Seventy five millimeters) thick (unconsolidated )bed of dry brick/stone aggregate 40mm (Forty millimeters) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing stone kharanja drain 45cm (Forty five centimeters) wide including 25cm (twenty five centimeter) side stone laid in cement motar 1:6 (one cement isto six sand) as per approved design/ drawings and HPPWD specification or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts, and other incidental. The rate including Royality, Malkhana Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor ISI marked 15mm (fifteen millimeters) nominal bore galvanized mild steel tubes (medium grade) tube fittings and clamps of approved brand and manufacture (TATA/JINDAL make) complete as per HPPWD specifications including making good the walls, ceiling and floor up to all floor levels including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor ISI marked 20mm (Twenty millimeters) nominal bore galvanized mild steel tubes (medium grade) tube fittings and clamps of approved brand and manufacture (TATA/JINDAL make) complete as per HPPWD specifications including making good the walls, ceiling and floor up to all floor levels including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE orrisa pattern vitreous china water closet squatting pan (Indian type W.C. pan) size 580mm (Five hundred eighty millimeters) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing ISI marked sand cast iron 100mm ( one Hundred millimeters) size “P” or “S” trap for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (one cement isto one sand), complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE poly Venyl Chloride 10/12.5/15.00 (ten/twelve point five/fifteen point zero zero liters) capacity low level flushing cistern with a pair of CI or MS brackets complete with fittings such as lead valves less siphon, 15mm (fifteen millimeter) dia brass ball valve with polythene float, CP brass handles, unions and couplings for connection with inlet, outlet and over flow pipes 40mm (forty millimeters) dia including PVC flush bend and cutting holes in walls and making good the same including connecting the flush bend with cistern and closet complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE flat back 550mmx400mm (five hundred fifty millimeter into four hundred millimeter) vitreous china wash basin with single hole for pillar tap, with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding the cost of fittings including carriage of material within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE vitreous china 450x350x150mm ( four hundred fifty into three hundred fifty into one hundred fifty millimeter) laboratory sink with C.I or M.S. brackets painted white including cutting holes in walls and making good the same including carriage of material within all leads, lifts and other incidental. The rate including Octroi, Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing C.P Brass chain 50cm long and rubber plug 32 mm dia (thirty two millimeter) dia meter for wash basin or sink including carriage of material within all leads, lifts and other incidental. The rate including Octroi, Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 32 mm (thirty two millimeter) dia C.P Brass waste for basin within or sink including carriage of material within all leads, lifts and other incidental. The rate including Octroi, Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 32 mm (thirty two millimeter) dia M.I union for wash basin and sink including carriage of material within all leads, lifts and other incidental. The rate including Octroi, Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 32 mm (thirty two millimeter) diameter C.P Bottle trap for wash basin and sink including carriage of material within all leads, lifts and other incidental. The rate including Octroi, Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing ISI marked, 32mm (thirty two millimeters) diameter CP Brass waste pipe for wash basin or sink with including brass check nut complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing ISI marked, 100mm (One hundred millimeters) sand cast iron grating for gully, floor or Nahni trap complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass (Atual tuff/ Modi or equivalent make) mirror mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government

Providing and fixing 600x20mm (six hundred into twenty millimeters) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 600x120mm ( Six hundred into one hundred twenty millimeters) glass shelf with C.P brass bracket and guard rail complete fixed to wooden plugs with C.P brass screws including carriage of material within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing (Jaguar or equivalent make) 15mm (Fifteen millimeters) diameters C.P. brass Pillar tap with capstan head complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing (Jaguar or equivalent make) 15mm (Fifteen millimeters) diameters C.P. brass bib tap with capstan head complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing (Jaguar or equivalent make) 15mm (fifteen millimeter) dia CP brass stop cock complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing ISI marked full way valve with wheel including carriage of material within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 20mm (Twenty millimeter bore).

Providing and fixing ISI marked full way valve with wheel including carriage of material within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 15mm (Fifteen millimeter bore).

Providing and fixing ISI marked 45cm (forty five centimeter) length and 15mm (Fifteen millimeter) nominal bore PVC connection pipe with brass unions complete including carriage of material within all leads, lifts other incidental. The rate including Octroi, Sales tax or any other taxes imposed by the Government.

Providing and placing in position three layered PVC water storage tank, sintex or equivalent make and of 500 (five hundred) liters capacity complete in all respects, with necessary fittings including brass ball valve, with polythene float valve, PVC cover with locking arrangement including proving pads of sizes as required for inlet and outlet complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing ISI marked sand cast iron/cast iron spun spigot and socket soil, waste and ventilating pipes complete as per HPPWD specification or as directed by the Engineer-in-Charge, (lead caulked joint to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi, Sales tax, Toll tax or any other taxes imposed by the Government. 100 mm (hundred millimeters) nominal size

Providing and fixing ISI marked sand cast iron/cast iron spun spigot and socket soil, waste and ventilating pipes complete as per HPPWD specification or as directed by the Engineer-in-Charge, (lead caulked joint to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi, Sales tax, Toll tax or any other taxes imposed by the Government. 75mm (Seventy five millimeters) nominal size.

Providing and fixing ISI sand cast iron/cast iron spun fitting and accessories complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government. (a) Bends of required degree (any radius) with oval access door insertion rubble washer 2mm (two millimeter) thick bolts and nuts complete. (i) 100 mm (one hundred millimeters) nominal size.

Providing and fixing ISI sand cast iron/cast iron spun fitting and accessories complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government. (a) Bends of required degree (any radius) with oval access door insertion rubble washer 2mm (two millimeter) thick bolts and nuts complete. (i) 75mm (Seventy five millimeters) nominal size.

Providing and fixing ISI sand cast iron/cast iron spun fitting and accessories complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government. (a) Plain bend (i) 75mm (Seventy five millimeters) nominal size.

Providing and fixing ISI sand cast iron/cast iron spun fitting and accessories complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government. (a) Plain bend (ii) 100 mm (one hundred millimeters) nominal size.

Providing and fixing ISI sand cast iron/cast iron spun fitting and accessories complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government. (a) Plain Single equal branch of required degree (i) 100 mm (one hundred millimeters) nominal size.

Providing and fixing ISI sand cast iron/cast iron spun fitting and accessories complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government. (a) Plain double equal branch of required degree (ii) 100 mm (one hundred millimeters) nominal size.

Providing lead caulked joint to sand cast iron/cast (spun) iron pipes and fittings including testing of the joints complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government. (a) 75mm (seventy five millimeter) nominal size / diameter.

Providing lead caulked joint to sand cast iron/cast (spun) iron pipes and fittings including testing of the joints complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government. (a) 100mm (one hundred millimeters) nominal size/diameter.

Providing and fixing ISI marked 100 (one hundred) millimeter nominal diameter cast iron floor trap of self cleaning of design with sand cast iron screwed down or hinges/grating without vent arm complete including the cost of cutting and making good the Walls and floor etc complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government.

Providing and fixing ISI marked cast iron cowl 100mm (one hundred millimeters) nominal diameter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government.

Providing and laying (to level or slopes) and jointing with stiff misture of cement mortar in proportional of 1:1 (one cement isto one sand) salt glazed stone water pipe grade A of 150mm (one hundred fifty millimeters) internal diameter including testing of pipes and joints complete as per HPPWD specification or as directed by the Engineer-in-Charges including carriage of material with in all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeters) nominal size bedding for stone ware pipe of the 150 mm (one hundred fifty millimeters) internal diameter including necessary form work and curing complete including carriage of material within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government.

Constructing man hole with RCC top slab in cement concrete 1:2:4 mix (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeters) nominal size) foundation concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter nominal size) inside plastering 15mm (fifteen millimeters) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size finished smooth complete including curing and testing. Inside size 800x800mm (eight hundred into eight hundred millimeter) and upto any depth and including C.I. cover with frame (light duty single seal pattern-I) 455mmx610mm (four hundred fifty five millimeters into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kgs (fifteen kilogramme (a) with 200mm (two hundred millimeter)thick walls of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement isto three sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials leads, lifts and other incidentals.

AMIT SPEHIA GOVT CONTRACTOR