Construction of toilet near old existing toilet on road leading towards Ram Kundi and repair of toilet near Hariom stationary near cant. school katcha tank Nahan, District Sirmour ( HP ) .

Excavation work by mechanbical means (Hydraulic excavator) / manual means in foundation trenches or drains in all classification of soil, including dressing of sides & ramming of bottoms, in all leads, lifts, including getting out the excavated soil & disposal of all surplus excavated soil as per entire satisfaction and directed by the Engineer-in-Charge.

Supplying & filling in plinth with sand under floors, including watering,ramming,consolidating & dressing complete,including all leads, lifts & carriage of materials & to entire satisfaction of the Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade mechanically mixed and curing complete excluding the cost of centering and shuttering - All work up to plinth level and all floor level in 1:4:8 (one Cement : four coarse sand : eight graded stone aggregate 20mm (twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Random rubble masonry with hard stone in foundation & plinth including levelling up with cement concrete 1 : 6 : 12 ( One cement : six coarse sand : twelve graded stone aggregate 20 mm ( twenty milimetre ) nominal size ) upto plinth level with cement mortar 1 : 6 ( One cement : six coarse sand ), including all leads, lifts,carriage of materials & to the entire satisfication of the Engineer-in-Charge.

Stone/ boulder filling behind retaining wall/ under flooring, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge

Brick work with common burnt clay F.P.S. ( Non-modular ) bricks of class designation 7.5 ( Seven piont five ) in foundation & plinth in cement mortar 1 : 6 ( One cement : Six coarse sand ), including all leads,lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge.

Brick work with common burnt clay F.P.S. ( Non-modular ) bricks of class designation 7.5 ( Seven point five ) in Super-structure above plinth level upto floor V level in cement mortar 1 : 6 ( One cement : six coarse sand ), including all leads,lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge.

Half brick masonry with common burnt clay F.P.S. ( Non modular ) brick of class designation 7.5 ( Seven point five ) in foundation & plinth in cement mortar 1 : 4 ( One cement : four coarse sand ) including all leads,lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge.

Centring & shuttering including strutting, propping etc.& removal of form work for Suspended floors, roofs, landings, balconies & access platform, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge

Centring & shuttering including strutting, propping etc.& removal of form work for Edges of slabs & breaks in floors & wall under 20cm wide, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge

Reinforced cement concrete in beams, suspended floors, roofs having slope upto 15 ( fifteen ) degree landing, balconies, shelves, Chajjas,Lintels, bands, plain windows sills, staircases & spiral cases above plinth level upto floor five level, excluding cost of centring, shuttering, finishing & reinforcement in 1:1.5:3 ( One cement : one & half coarse sand : three graded stone aggregate 20 mm ( twenty milimetre ) nominal size ),including all leads & lifts,carriage of materials & to the entire satifaction of the Engineer-in-Charge

Steel reinforcement for reinforced cement concrete work including straightening, cutting, bending, placing in position & binding all complete upto all floor level Thermo-Mechanically Treated bars of grade Fe-500 ( Five hundred ) D or more, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing wood work in frames of doors, windows, clerestory windows & other framed, wrought framed & fixed in position with hold fast lugs or with dash fasteners of required dia & length (Hold fast lugs or dash fastener shall bepaid for separately ) Sal wood, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing 40 x 5 mm ( forty into five milimetre ) flat iron hold fast 40 cm ( forty centimetre ) long including fixing to frame with 10 mm ( ten milimetre ) diametre bolts, nuts & wooden plugs & embedding in cement concrete block 30 x 10 x 15 cm ( thirty into ten into fifteen centimetre ) mix 1 : 3 : 6 ( One cement : three coarse sand : six graded stone aggregate 20 mm ( twenty milimetre ) nominal size ),including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing & fixing panelled or panelled & glazed shutters for doors, windows & clerestory windows fixing with butt hinges or required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge,Butt hinges & necessary screws shall be paid separately, Second class Deodar wood, 35 mm thick shutter, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing & fixing flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood & well matched commerical ply veneering with vertical grains of cross bands & face veneers on both face of shutter covered with 3 mm ( three milimetre ) thick plastic sheet upto 100 ( One hundred ) centimetre height from bottom ( from inside only ) 35 mm ( thirty five milimetre ) thick including black enamelled mild steel butt hinges, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing & fixing aluminium sliding door bolts, ISI marked anodized ( anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with nuts & screws etc. complete 250 x 16 mm ( two hundred fifty into sixteen milimetre ) size, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge

Providing & fixing aluminium tower bolts, ISI marked, anodized ( Anodic coating not less than grade AC 10 AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 200 x 10 mm ( two hundred into ten milimetre ), including all leads, lifts & carriage of materials & to the entire satisfcation of the Engineer-in-Charge.

Providing & fixing aluminium handles, ISI marked, anodized ( Anodic coating not less than grade AC 10 AC 10 as per IS : 1868 ) transparent or dyed to reuired colour or shade, with necessary screws etc. complete 100 mm ( one hundred milimetre ), including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing & fixing aluminium hanging floor door stopper, ISI marked, anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour & shade, with necessary screws etc. complete Single rubber stopper, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing & fixing glass panes with putty & glazing clips in steel doors, windows, clerestory windows, all complete with 4.00 mm ( four milimetre ) thick glass panes, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Cement concrete flooring 1 : 2 : 4 ( One cement : two coarse sand : four graded stone aggregate ) finished with al floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete, 40 mm ( forty milimetre ) thick with 20 mm ( twenty milimetre ) nominal size stone aggregate, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing & laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % & conforming to IS 15622, of approved make, in all colours & shades, laid on 20 mm thick cement mortar 1 : 4 ( One cement : four coarse sand ), jointing with grey cement slurry @ 3.3 Kilogram per square metres including grouting the joint with white cement & matching pigments etc. complete size of tile 300 x 300 mm ( Three hundred into three hundred milimetre ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge

Providing & laying vitrified tiles in different sizes ( thickness to be specified by manufacturer ) , with water absorption less than 0.08 % & conforming to IS 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 : 3(One cement : three coarse sand ), jointing with grey cement slurry @ 3.3 Kilogram per square metres including grouting the joints with white cement & matching pigments etc. complete size of tile 600 x 600 mm ( six hundred into six hundred milimetre ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge

Providing & fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion ( I ) Single socketed pipes 110 mm diameter, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing & fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten milimetre ) gap for thermal expansion bend 87.5 ( eighty seven point five ) degree 110 mm ( One hundred ten milimetre ) bend, including all leads,lifts, & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing & fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten milimetre ) gap for thermal expansion Shoe ( Plain ) 110 mm ( One hundred ten milimetre ) bend, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing & fixing mild steel holder bat clamps of approved design to Cast iron or S.C.I. rain water pipes embedded in and including cement concrete blocks 10 x 10 x 10 cm ( ten into ten into ten centimetre ) of 1 : 2 : 4 mix ( One cement : two coarse sand : four graded stone aggregate 20 mm ( Twenty milimetre ) nominal size ) & cost of cutting holes & making good the wall etc. 110 mm diameter PVC, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

15 mm ( fifteen milimetre ) cement plaster on the rough side of single or half brick wall of mix in cement mortar 1:6 ( One cement : six fine sand ), including all leads, ,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade new work ( two or more coats ) over and including water thinnable priming coat with cement primer including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Finishing walls with Acrylic smooth exterior paint with of required shade new work ( two or more coat ) applied @ 1.67 litre/10 Sqmt ( one point six seven litre per ten square metres ) over & including priming coat of exterior primer applied @ 2.20 Kg /10 Sqmt ( at the rate two point two zero kilograme per ten square metre ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade.Two or more coat applied @ 0.90 ltr/ 10sqm( zero point nine zero litre per ten square meter ) over an under coat of primer applied @ 0.75 ltr/ 10sqm( zero point seven five litre per ten square meter ) of approved brand and manufacture complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10litre ( ten litre )low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- W.C. pan with ISI marked white solid plastic seat and lid.

Providing & fixing white Vitreous China flat back half stall urinal of size 630 x 420 x 390 mm ( Six hundred thirty into four hundrded twenty into three hundred ninety milimetre ) with white PVC auotmatic flusing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with union & clamps ( all in C.P. brass ) with waste fitting as per IS : 2556, C.I. trap with out let grating & other couplings in C.P. brass, including painting of fittings & cutting & making good the walls & floors wherever required Range of two half stall Urinals with 5 litre P.V.C. automatic flushing cistern, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15mm ( fifteen millimeter ) C.P. brass pillar taps, 32mm ( thirty two millimeter ) C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- White Vitreous China wash basin size 550 x 400 mm ( Five hundred fifty into four hundred milimetre ) with single 15 mm ( fifteen milimetre ) C.P. Brass pillar tap, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge

Providing and fixing 600mm x 450mm ( Six hundred millimeter into four hundred fifty millimeter ) beveled edge mirror of superior glass (of approved quality) complete with 6mm ( six milimetre ) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing G.I. pipes complete with G.I. fittings & Clamps including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting & making good the walls including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. internal work:-15mm ( fifteen millimeter ) dia nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .

Providing and fixing C.P. brass stop cock ( Concealed ) of standard design & of approved make conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .

Providing and fixing C.P. brass angle valve for basin mixer & geyser point of approved quality conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .

Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge

Providing & fixing PVC door bend with oval access door, insertion rubber washer 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 110 mm ( one hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge

Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge

Providing & fixing PVC clamps ISI marked of approved design with steel screws & rawal plugs etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge

Providing & fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete 110 mm x 75 mm ( One hundred ten milimetre into seventy five milimetre ) dia, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge

Please Enable Macros to View BoQ information