Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.3 LAccepted-AOC CALICUT ROAD KAKKATTIL CALICUT | KOZHIKODE | KERALA | 612906 | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical 20 1 2024 | - | Rejected-Technical L4 | |
| 3 | Rejected-Technical | - | Rejected-Technical L5 | |
| 4 | Rejected-Technical | - | Rejected-Technical L2 | |
| 5 | Rejected-Technical | - | Rejected-Technical L6 |
| Sl No | Description | Qty | Unit | T SURESH BABU L2 | KALPETTA ZONE LABOUR CONTRCT CO-OPERATIVE SOCIETY LTD L5 | ABDUL GAFOOR L3 | Moideen O K L6 | BIJU KM L1 | ASHIN LAL L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00Detailed Estimate | |||||||||
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 150 | sqm | 675.5 ₹1,01,325 | 730.98 ₹1,09,647 | 718 ₹1,07,700 | 746 ₹1,11,900 | 520 ₹78,000 Lowest | 723.12 ₹1,08,468 |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 30 | metre | 453 ₹13,590 | 490.46 ₹14,713.8 | 482 ₹14,460 | 527 ₹15,810 | 435 ₹13,050 Lowest | 485.19 ₹14,555.7 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 2,735.82 | kg | 150 ₹4,10,373 Lowest | 162.36 ₹4,44,187.74 | 160 ₹4,37,731.2 | 165 ₹4,51,410.3 | 157 ₹4,29,523.74 | 160.61 ₹4,39,400.05 |
| 1.00 | OD233582/2025-2026:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete(Using departmental steel) | 80 | kg | 43 ₹3,440 Lowest | 46.7 ₹3,736 | 46 ₹3,680 | 47.5 ₹3,800 | 95 ₹7,600 | 46.2 ₹3,696 |
| 1.00 | OD233594/2025-2026:Labour for cleaning the sorroundingsincluding all cost conveyance etc. complete. | 20 | each | 868 ₹17,360 Lowest | 939.33 ₹18,786.6 | 923 ₹18,460 | 959.5 ₹19,190 | 1,000 ₹20,000 | 929.23 ₹18,584.6 |
| 1.01 | OD233642/2025-2026:Supplying and fixing 200mm( Square )PVC rain water gutter including fitting with MS flat
supporters at 1m interval etc. complete | 30 | metre | 525 ₹15,750 | 568.16 ₹17,044.8 | 558 ₹16,740 | 579 ₹17,370 | 425 ₹12,750 Lowest | 562.05 ₹16,861.5 |
| 1.01 | OD233639/2025-2026:Supplying and laying interlocking tile 60mm or nearest size thickness, minimum
strength M30 including providing a layer of 6mm aggregate for 5cm thickness, then laying interlock cobbles
in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance
charges etc. complete
Details of cost for 1sqm | 182.93 | sqm | 950 ₹1,73,778.75 Lowest | 970.61 ₹1,77,548.83 | 954 ₹1,74,510.45 | 990 ₹1,81,095.75 | 950 ₹1,73,778.75 Lowest | 960.18 ₹1,75,640.93 |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 3.96 | cum | 7,413 ₹29,362.89 Lowest | 8,016.82 ₹31,754.62 | 7,878 ₹31,204.76 | 8,102 ₹32,092.02 | 7,950 ₹31,489.95 | 7,930.62 ₹31,413.19 |
| 1.01 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | 6 | cum | 6,878 ₹41,268 Lowest | 7,438.01 ₹44,628.06 | 7,308 ₹43,848 | 7,517 ₹45,102 | 7,300 ₹43,800 | 7,358.03 ₹44,148.18 |
Tender Value
₹11.1 L
EMD Value
₹27,756
Closing Date
18 Sept 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Asst Engineer
Assistant Engineer LID WE SUB DIVISION KALPETTA
Annual Plan Kalpetta Block Panchayath Project no 61 25 26 Renovation works at Vythiri Taluk Hospital MG FundAmount 1311000 General Civil Work
2025_LSGD_795539_2
AEE/LID(EW)KPTA/2/2025
Open Tender
Civil Works - Buildings
Item Rate
Kalpetta
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹27,756
Yes
22 Nov 2025
11 Sept 2025
20 Sept 2025
11 Sept 2025
18 Sept 2025
11 Sept 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .