Improvement of Mastic B.T Road and C.C Drain at Badasankha Nua Sahi lane and bylane in Ward No-23

Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m

Supplying of all materials, labour, T&P for earthwork in excavation of foundation in ordinary soil of soil including dressing and levelling the bed with cost and conveyance of all materials, labour royalty T&P etc all complete as per the direction of Engineer in charge

Providing , laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with pavers in sub-base/base course on well prepared surface and copacting with vibratory roller to achive the desired density as per Clause 406 of MoSRT&H Specifications for Road works.Page-166, Item no.-42

Supplying and filling in foundation, trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge.

Providing P.C.C. M.25 grade with 20mm and down graded CBHG chips including hoisting and laying with all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of Engineer-in- charge.

Centring and shuttering and removal of form work for : Foundations, footings, bases for columns including cost of materials labours etc. complete

Straightening cutting, bending bent up of M.S. rods / Tor steels, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer- in-Charge.

Cleaning the existing surface with removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and or compressed air to receive bituminous.

Providing and applying Tack Coat with Bitumern at the rate of 0.20 Kg per Sqm on the prepared surface cleaned including cost of Carriage & Royality taxes etc complete.

Providing and laying 25mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29 prepared by using mastic cooker and laid to required level and slope after cleaning the surface including providing antiskid surface with bitumen precoated finegrained hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10 sqm and at an approximate spaceing of 10 cm centimeter in both direction pressed in to surface when the temperatue of the surface not less than 100 degree centigrade protruding 1 mm to 4 mm over mastic surface all complete.