REPAIR MAINT OF SEWAGE LINE, SEPTIC TANKS, SOAK WELL AND FENCING, GATES, BDY WALLS, DRAINS, HARD STANDING IN ZONE-E, ZONE-F AND SANJOG CHHETRI VIHAR AREA OF AGE BR-II UNDER GE (EAST) LUCKNOW

Amount

Dismantling fencing wire mesh,any description complete all as specfied and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion complete all as specified and directed.

M&L for Cement concrete type C2 1:3:6 (40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

S&F M S work as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc complete all as specified and directed.

M&L two coat of synthetic enamel pinting over a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth complete all as specified and directed.

M & L for preparing new steel surfaces not exc 10cm width/girth, applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply only chain link MS galvanised fencing, any mesh, size and type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S & F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. (Note:- each line wire to be measured )

S&F 5 to 10 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for roof kerbs, drain complete all as specified and directed.

Demolition of reinforced cement concrete as in cover slabs for manhole, septic tank and soak well etc (reinforcement cut as required to facilitate demolition), complete, all as specified and directed.

M & L for brick work using fly ash brick straight or curved on plan, exc 6.0 m mean radius, built in CM (1:4) as in manhole/ septic tank/soak well, complete, all as specified and directed.

Ditto all as per item No 14 above but except bricks (Note :- Brick obtained from item No 11 shall be reused)

M&L fly ash Brick work using old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.

M&L providing precast cement concrete louvers and jallies type B0 1:2:4(12.5 mm graded aggregate), 35 mm thick(measured solid), including all mould-ing ,set in cement mortar 1:4, but excluding frame complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair face of brick work surfaces, , finished even & smooth without using extra cement, complete, all as specified and directed.

M & L for preparing and applying two coats of cement base paint over a coat of primer on new Plasterd surface of wall

M&L for Reinforced cement concrete Type B1 (1:2:4) (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels or lintel band all as specified and directed

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for PCC (1:3:6), type C-2 using 20mm graded crushed stone aggregate as in surface channel, drain etc., complete, all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

M&L for PCC type B-0 1:2:4 (using 12.5 mm graded stone aggregate) in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, kneelers, apex stones, bed plates, , water troughs and the like including weathering, slightly rounded or chamfered angles and throating , complete all as specified and directed.

M&L for RCC 1:2:4 (Nominal Mix), type B-1 using 20mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like, complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B1 using 20mm graded crushed stone aggregate as in manholes covers, cover slabs of drains and similar works including placing in position and set in CM (1:4) with plain fair faces including chamfered weathering, throating etc including necessary use and waste of form work, complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete.

Use and waste of form work to soffits of beam and similar works etc for rough finished surfaces of concrete flat all as specified.

Use and waste of form work to edges of concrete flates such as roofs exc 10cm but, n exc 20 cm wide horizontal or slopping and similar work fair finished surface of concrete

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

M&L for reinforcement TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

Cleaning of manholes to any depth by taking out semi solid/solid sludge complete and removing sludge in covered vehicle out of MOD land complete, all as specified and as directed.

Dewatering of soak well using mechanical pump diesel driven with fuel operator and crew necessary for excavation, burying the night soil and disposal of soak well water etc as directed at site including excavation and earth work for pits for burring the night soil, complete all as directed.

Cleaning of septic tank for 10 users by means of sewage sucking machine and disposal of the same out of defense land, complete, all as directed.

Ditto all as item no- 35 above but for Septic tank 25 users

Ditto all as item no- 35 above but for Septic tank 50 users

Ditto all as item no- 35 above but for Septic tank 100 users Note for item No- 35 to 38 :- Work shall be executed under the supervision of highly skilled workman / supervisor without entering in the septic tank / main hole / sludge chamber and all safety measures shall be strictly followed.

M&L for cleaning of blockage of sewer lines, manholes in any type and any dia of sewer line (i.e. branch sewer line, main sewer line) by way of cleaning desludging foreign material as well as roding of sewer line between successive manholes manually/mechanically or pumping out sewage from blocked manhole including desludging where required and ordered by Engineer-in-Charge and keeping sewer line functional from Ist manhole upto final drop as septic tank, soakage well all as specified and directed. Note :- Work shall be executed under the supervision of highly skilled workman / supervisor without entering in the septic tank / main hole / sludge chamber and all safety measures shall be strictly followed

M&L for cleaning of blockage of sewer lines / pipe line in any type and any dia of sewer line (i.e. branch sewer line, main sewer line) by way of cleaning desludging foreign material as well as roding of sewer line between successive manholes manually / mechanically or pumping out sewage from blocked manhole including desludging where required and ordered by Engineer-in-Charge and keeping sewer line functional entering from floor trap/nahani trap, water closet, soil waste/ vent pipe, gully trap upto Ist manhole, all as specified and directed. Note :- Work shall be executed under the supervision of highly skilled workman / supervisor without entering in the septic tank / main hole / sludge chamber and all safety measures shall be strictly followed.

S&F for SGSW pipe of 150mm bore including jointing with cement joints and haunching with PCC 1:4:8 type D-2 using 40mm graded stone aggregate for 150mm bore SWG pipe line including excavation and earth work and returning, filling in trenches and removal of soil upto 150m, including taking up broken sewage pipe line , all as specified and directed.

Taking down rain water pipes (any size or pattern) including all fittings, shoes, bends, swan neck etc and removal to store.

S&F 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall including PVC holding clamps, complete, all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints in trenches including PVC holding clamps, complete, all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall including PVC holding clamps, complete, all as specified and directed.

S&F 110mm bore PVC (SWR) bends, any radius with access door complete, all as specified and directed.

S&F of 75mm bore PVC (SWR) bends, any radius with access door complete, all as specified and directed.

S&F vitreous china squatting pan (Orissa pattern) water closet (white) of size 630x450mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete, all as specified and directed.

Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete, all as specified and directed.

Excavating over areas, not exc. 1.5 m deep and getting out in soft/loose soil complete, all as specified and directed.

Excavating over areas, exc. 1.5 m and not exceeding 3.0 m deep and getting out in soft/loose soil complete, all as specified and directed.

Excavating over areas, exc 3.0 m and not exceeding 4.50m deep and getting out in soft/loose soil complete, all as specified and directed.

M&L PCC 1:2:4 typeD-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed.

M&L PCC 1:4:8 typeD-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed.

M & L brick work with fly ash bricks in one brick thick honey walling, old size brick built in cement mortar 1:4 complete all as specified and as directed.

Returning, filling in , including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete, all as specified and directed.

Removing excavated material exc 1.50 Km but n exc 5 Km and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M&L for aggregate for loose filling, of broken bricks of gauge 40mm to 80mm graded complete, all as specified and directed.

Cutting into existing Septic tank/manholes for connecting new drains (150mm internal dia of pipe), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, complete, all as specified and directed.

M&L 75 mm thick PCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in floor or hard standing etc finished surface even & smooth without using extra cement complete, all as specified and directed.

M&L for sand/crused stone sand filling under floor or in foundation or as in sand cussion bed including leveling complete, all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block glossy finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness,M-40 grade in set jointed and pointed with grey cement slurry and pigment to match the floor approved design /colour set and bedded all as specified and directed.

M&L for PCC type B2 (1:2:4) (using 40 mm graded stone aggregate) Cement concrete in foundations, filling and mass concrete in floor hard standing complete all as specified and directed.

M&L for glossy type coloured chequered cement concrete tiles with gray cement and pigment size 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in cm 1:6 complete, all as specified and directed.

M&L 20 mm thick granite (of any type) work (table rubbed and polished) for wall,pillar lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete, all as specified and directed.

Ajay Sahu & Sons

NEW BHARAT ENGINEERING AND CONSTRUCTION CO

M/s Hindustan Trading Co