Kerala

Technical Eval

Works

Electrical Works

Construction of HT line Covered Conductor to Paikavu tfr

Kerala State Electricity Board

Paikavu near Koratty | Thrissur, Kerala

Amount: ₹7.6 LCloses: 14 Aug 2026Closed

Timeline

Published6 Aug 2026
Closed14 Aug 2026
Technical Evaluation11 Sept 2026
Award—

Bids

3 Bids11 Sept 2026

#	Company	Status
1	JIJO P D Accepted-Technical	Accepted-Technical Technically admissible
2	JOSE V D Accepted-Technical	Accepted-Technical Technically admissible
3	K.J MATHEW Accepted-Technical	Accepted-Technical Technically admissible

Tender Value

₹7.6 L

EMD Value

₹19,000

Closing Date

14 Aug 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer, PMU, Irinjalakuda

Address

Executive Engineer, Vdyuthi Bhavanam,Irinjalakuda-680121

Work Description

Construction of HT line Covered Conductor to Paikavu tfr

Tender Information

Tender ID

2026_KSEB_864522_1

Reference Number

TENDER/2026-27/5154/82 dt.05.08.2026

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Percentage

Period of Work

90 days

Location

Paikavu near Koratty

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredSigned copy of Adhaar Card, PAN card, GST registration and bank passbook (.pdf)

RequiredSigned copy of Bid document (.pdf)

RequiredTender fee and EMD remittance details (.pdf)

RequiredBounden Agreement executed in stamp paper worth Rs 200/- (.pdf)

RequiredCopy of experience certificate for last 5 years (.pdf)

RequiredAll other documents/ Certificates mentioned elsewhere in the Bid document (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,888

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹19,000

Important Dates

Last Activity

11 Sept 2026

Published

6 Aug 2026

Bid Opening

17 Aug 2026

Download Starts

6 Aug 2026

Download Ends

14 Aug 2026

Submission Starts

6 Aug 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (36 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.	1	No	2,795.55	₹2,795.55
2	Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials.	9	No	564.55	₹5,080.95
3	Drilling hole of various sizes on existing Channel/Cross Arm.	9	No	16.73	₹150.57
4	Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at standard distance (1.5m) away from the pole/structure in ordinary soil & backfilling the pit with 15cm alternate layer of charcoal, salt and sand up to 90cm from the bottom. including the cost of 20kg salt, 25kg charcoal, excluding supply of earth pipe.	3	No	4,245.59	₹12,736.77
5	Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling.	2	No	2,266.55	₹4,533.1
6	Fitting and erecting one HT A type Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).	28	No	4,143.14	₹1,16,007.92
7	Additional rate for providing one disc set, PG clamp etc. complete, on any type of HT pole for making cut point.	27	No	158.91	₹4,290.57
8	Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole including conveyance of materials.	8	No	481.95	₹3,855.6
9	Dismantling (without damage) one km LT three phase 4 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.	1	km	14,129.32	₹14,115.19
10	Stringing one km LT Addl conductor (Rabbit) after relocating one of the existing conductor, incl. fitting insulators, removing touchings and conveyance of materials.	1	km	6,025	₹6,018.98

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.60 MB

Work Item Documents

BOQ_1462795.xls

BOQ • 0.38 MB

GCC.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

JIJO P D

Accepted-Technical

JOSE V D

Accepted-Technical

K.J MATHEW

Accepted-Technical

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.

2,795.55

₹2,795.55

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials.

564.55

₹5,080.95

Drilling hole of various sizes on existing Channel/Cross Arm.

16.73

₹150.57

Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at standard distance (1.5m) away from the pole/structure in ordinary soil & backfilling the pit with 15cm alternate layer of charcoal, salt and sand up to 90cm from the bottom. including the cost of 20kg salt, 25kg charcoal, excluding supply of earth pipe.

4,245.59

₹12,736.77

Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling.

2,266.55

₹4,533.1

Fitting and erecting one HT A type Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).

4,143.14

₹1,16,007.92

Additional rate for providing one disc set, PG clamp etc. complete, on any type of HT pole for making cut point.

158.91

₹4,290.57

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole including conveyance of materials.

481.95

₹3,855.6

Dismantling (without damage) one km LT three phase 4 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.

14,129.32

₹14,115.19

Stringing one km LT Addl conductor (Rabbit) after relocating one of the existing conductor, incl. fitting insulators, removing touchings and conveyance of materials.

6,025

₹6,018.98