PROVN OF SIDE WALL AND CEMENT SURFACE FOR CHILDREN PARK TATA NAGAR,ADDN,ALTN TO BOUNDRY WALL AND PATH OF SMQs IN GANDHINAGAR and PROVN OF SEPARATE ENCLOSURE FOR GAS CYLINDERS AND ALLIED WORKS AT AFS MADH ISLAND UNDER GE AF THANE

Amount

Demolition of cement Concrete of any descrpition in ground floor or stone wall masenary for grouting iron angle to fix in wall to receive galvalume sheet ,complete all as specified and directed by Engg-in-Charge.

S&F Joist, channel, angle or tee section,heavy weight fixed independently, without connecting plates etc. Fe-410-W(Gde-E-250) quality-B ,complete all as specified and directed by Engg-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with self tappping screws or screw bolts ,complete all as specified and directed by Engg-in-Charge.

M&L for preparation of new surfaces of steel of any description, over 10cm in width or girth,not otherwise described and applying two coats of epoxy paint over a coat of primer ,complete all as specified and directed by Engg-in-Charge.

Removing excavated/demolished material/ soil, not exc 50.00 mtr and deposited where directed at a level not exc 1.50 mtr above the starting point ,complete all as specified and directed by Engg-in-Charge.

Dismentling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises,complete all as specified and directed by Engg-in-Charge.

M&L for Plain cement concrete , Type D2 ,1:4:8 (40mm graded stone aggregate) as in floors (75mm thickness) ,complete all as specified and directed by Engg-in-Charge.

M&L hand cut Kota stone flooring 20 to 25 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in floor, treads etc including rubbing and mirror polishing laid over and including screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:6 , complete all as specified and directed by Engr-in-charge.

M&L for brick work with sub class B (using Old Size bricks) bricks , straight or curved on plan exc 6m mean radius built in cement mortar 1:6 ,complete all as specified and directed by Engg-in-Charge.

M&L for brick work with sub class B (using Modular bricks) bricks , straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 ,complete all as specified and directed by Engg-in-Charge.

M & L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces , complete all as specified and directed by Engr-in-charge

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials from the site ,complete all as specified and directed by Engg-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 including finished even and smooth without using extra cement ,complete all as specified and directed by Engr-in-charge.

S&F coloured Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:3 as backing coat to receive skirting / dado and risers to steps etc, complete all as specified and directed by Engr-in-charge.

S&F Expanded metal, (not exc 4 kg) cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples to steel members,complete all as specified and directed by Engg-in-Charge.

S&F mild steel, (0.63mm thickness)plain black sheet inin hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel members, etc.,with plain 40mm lap joints or welded/ riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. ,complete all as specified and directed by Engg-in-Charge.

M&L for S.S 304 Class schedule 40 LPG pipe line labour Testing fitting painting installation charging and testing certificate with LPG pipe line incl shut valve with barrel nipple,S S elbow, main fold Schedule, 15mm non return valve, 15mm Regulator, 15mm Surksha hose pipe Hydrolic Punching, 20PSI PRV, Heavy Bracket with Clampor Nut Bolt, ,complete all as specified and directed by Engg-in-Charge.

S&F Aluminum Anodised frame powder coated for doors, windows, ventilators with one or more rebates including joining cleat, (min powder coating 50micron) of approved colour any track sliding windows and Doors / Partition frames with aluminum sections mentioned in catalogue of approved manufacturer including suitable rubber beading, channel gasket, nylon rollers, star lock with handle with complete fittings including water tightening (sealing around the window) using silicon compound all around etc ,complete all as specified and directed by Engg-in-Charge (Note : Glass, Wire cloth shall be measured under respective items).

S&F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 ,complete all as specified and directed by Engg-in-Charge.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section ,complete all as specified and directed by Engg-in-Charge.

Excavation in trenches n. exc 1.5m wide and n. exc 1.5m depth for foundation etc and getting out in hard/dense soil ,complete all as specified and directed by Engg-in-Charge.

M&L for providing PCC 1:4:8 type D2 using (40mm graded stone aggregate) in foundation filling and mass concrete ,complete all as specified and directed by Engg-in-Charge.

M&L for walling of random rubble uncoursed well bonded , bedded and solidity hearted etc built in CM 1:6 . brought upto to coarses etc ,complete all as specified and directed by Engg-in-Charge.

M&L for raised pointing in CM (1.4) to random or polygonal rubbles uncoursed masonary or brought upto courses ,complete all as specified and directed by Engg-in-Charge.

M & L for extra over granite or trap stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 40mm to face stone and dressing of face beds and joint as specifiee or random rubble walling uncoursed or brought upto courses ,complete all as specified and directed by Engg-in-Charge.

M&L for Plain cement concrete 1:2:4 type B 1 (Using 20 mm graded aggregate as in bed block,coping,kneelers,apex stone,bed plates etc ,complete all as specified and directed by Engg-in-Charge.

M&L for three coat of White wash to the old surfaces of wall even and smooth using extra cement,complete all as specified and directed by Engg-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm ,complete all as specified and directed by Engg-in-Charge.

Surface excavation n.exc 30 cm deep and avg 15 cm deep and getting out in soft soil ,complete all as specified and directed by Engg-in-Charge.

Excavation in post holes (or similar holes) each n.exc 0.5 cum as in hard and dense soiling good surface ,complete all as specified and directed by Engg-in-Charge.

M&L for Plain cement concrete in Type C2 1:3:6 (40mm graded stone aggregate) in Foundation, filling, and mass concrete ,complete all as specified and directed by Engg-in-Charge.

S&F retroreflective sign board made out of 3mm thick FRP sheet and 3mm high intensity retroreflective prismatic sheet passed on it as back ground in required colour one side including retroreflective writing and signs as required and directed by Engineer-in-Charge. (Note : Rate includes Fixing of FRP sheet to stainless steel Members including necessary nut bolts & fittings.)

S&F stainless steel tubular pipes of Grade 304 as in sign board poles, fixing frame etc ,complete all as specified and directed by Engg-in-Charge.

S&F ornamental stainless steel pieces such as pipe, caps, globe at top 18 gauge, complete as shown directed by Engineer-in-Charge.

M&L for writing Letter or Figures (Block, Roman, Italicor Indian) not exc 30cm height ,complete all as specified and directed by Engg-in-Charge.

S&F precast cement concrete benches of seating capacity 3 each.etc,complete all as specified and directed by Engg-in-Charge.

Removing excavated material soil to a distance exceeding 500 m but not exc 1.5 km and deposited whwer directed at a level n exc1.5 m above the atarting point ,complete all as specified and directed by Engg-in-Charge.

Demolition of unreinforced concrete in ground floors and pavings n exc 15 cm thickness ( belew or abv ground level) ,complete all as specified and directed by Engg-in-Charge.

Excavation in trenches n.exc 1.50m wide and not exceeding 1.50m depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, peir holes, etc. and getting out out in soft/loose ,complete all as specified and directed by Engg-in-Charge.

Excavation in trenches n.exc 1.50m wide and exceeding 1.50m but not exceeding 3m in depth for foundation, etc or not exceeding 10 Sqm on plan and exceeding 1.5m not exceeding 3m in depth for shapts, cesspits, manholes, peir holes, etc. and getting out out in soft/loose soil ,complete all as specified and directed by Engg-in-Charge.

M&L for precast cement concrete block masonary with soild blocks,etc 10 cm in width and setting in morter ,complete all as specified and directed by engr-in- charge.

M&L for Rendering 20 mm thick in CM 1:4 in two coats (15+5) with using integral waterproofing compound finished even and smooth without using extra cement on fair faces of brick work or concrete surface of wall ,complete all as specified and directed by Engg-in-Charge.

M&L for Coloured Glazed Ceramic tiles 600mmx300mmx 6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge..

S & F in replacement electronic energy meter, Three Phase Static Energy Meter in Poly Carbonate Body with LCD type display in class 1.0, 50Hz, 3 x 240V, anti-tamper features, ISI marked, class-I accuracy as per IS 13779, polycarbonate or high grade engineering plastic body, transparent terminal block cover, display of all parameters in an auto cycle/push button mode, communication port (optical or other type) complete including testing complete - 01 Nos. (Make -HPL/L&T) Note: Old Un serviceable electronic erergy meter will be deposit in MES store yard.

S&F MCB DB VTPN 8 Way double door type 415V with Neutral/bar and Earth connectors, complete all as specified and directed by Engr-in-Charge.

Supply and fix 3 Pole MCCB ,160 Amp ,50 Hz 415 V with rupturing capacity 16 KA including all necessary fittings which is required at site complete all as specified and directed by Engr-in-Charge.

S&F MCB TP, 40 Amps 16 KA all as specified and directed by Engr-in-Charge.

M & L for point wiring with PVC insulated unsheathed 1100 Volts grade single core multistranded Copper conductor cable 1.5 Sqmm drawn and including PVC conduit/ PVC casing caping all accessories, fixed on wall/ ceiling etc with necessary fixing accessories and earth continuity conductor cable of size 1.5 Sqmm green colour Connected to common earth and earth dolly including PVC terminal boxes fixed on wall Covered with laminated sheet top cover 3mm thick for mounting switches/ sockets/ fan regulators fixed with cadmium plated machine screws all as specified for the following (a) One light/fan point controlled by one switch.

S&F Switch piano flush type single pole one way 5 Amp ,complete all as specified and directed by Engg-in-Charge.

Supply and fixing switch socket combination 5 pin, 5 Amps ,complete all as specified and directed by Engg-in-Charge.

S&F ceiling rose surface type bakelite 65x50mm three terminal ISI marked ,complete all as specified and directed by Engg-in-Charge.

Supply & fix ceiling fan,1200 mm sweep, with electronic type regulator and accessories 230 V, BEE 5 star rated ,complete all as specified and directed by Engg-in-Charge.

S&F Fan regulator electronic step type 240 V ,complete all as specified and directed by Engg-in-Charge.

M&L for Sub Main wiring with two single core 4 Sqmm PVC insulated FR multistranded flexible copper conductor cable 660/1100 volts grade drawn in through flexible non metallic PVC casing and caping with and including PVC insulated 4.0 Sqmm multi strarnded single core copper conductor as continuous earth wire in green colour connected to common earth dolly ,complete all as specified and directed by Engg-in-Charge.

S&F in replacement Electronic energy meter with suitable size meter box made up of polycorbonate single phase, 50 Hz, 240 volts, AC, 10-60 Amp rating, LCD display, anti-tamper features, Microcontroller based digital technology as per ASIC and ISI marked, class-I accuracy as per IS 13779, polycarbonate or high grade engineering plastic body, transparent terminal block cover, display of all parameters in an auto cycle/push button mode, communication port (optical or other type) complete including testing complete - 01 No. NOTE :- Old Electric Energy Meter will be deposited to AGE E/M Store Yard.

Supply ,Laying, connecting and testing charging of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in trenches/wall/floor/ducts/along bridges/roof etc. including lugs and cable glands for 16 sqmm 4 Core ,complete all as specified and directed by Engg-in-Charge.

Supply, spreading in trenches crushed stone sand for cable protection cushioning and gently punning down with hand in layers,complete all as specified and directed by Engg-in-Charge.

Supply and fix in repairs of galvanished iron tubing light grade 50mm bore laid in trenches /floors for passing through UG Cable protection strip all as directed by Engr-in-charge.

Supply and laying un-reinforced precast concrete cable cover class LV type I, flat size 250mmx150mmx40mm for UG Cable protection strip ,complete all as specified and directed by Engg-in-Charge.

Cutting the existing road/hard standing surfaces to a depth of 60 cm and 0.45 cm width and getting out for laying of GI pipe for UG Cable protection including removing/returning filling with top 15cm thick with PCC 1:2:4 type B1 using 20mm graded stone aggregate and finishing even and fair without using extra cement including disposal of surplus soil ,complete all as specified and directed by Engg-in-Charge.

S&F MCB DB TPN 4 Way double door type 215V with Neutral/bar and Earth connectors complete all as specified and directed by Engr-in-charge.

S&F MCB SP 06 to 32 Amps 10KA with common connector ,complete all as specified and directed by Engr-in-charge.

S&F MCB TPN 63 Amps ,complete all as specified and directed by Engr-in-charge.

Material and labour for enegy efficeint wall mounted fan 400mm sweep,1400 RPM working on single phase 250 V AC (Pull cord control for speed & oscillation On-Off) complete with including writing MES No 02 cm height with synthetic enamel black paint and fixing arrangement on wall ,complete all as specified and directed by Engg-in-Charge.

M&L for sub main wiring complete with two run of 2.5 Sqmm PVC insulated and PVC unsheathed 1100 Volt grade with multistranded copper conductor cable with and including drawn through PVC conduit/casing caping with all accessories fixed on Walls/floors/roofs with and including provision of 2.5 sqmm PVC insulated copper wire as earth continuity conductor and connecting to common earth dolly ,complete all as specified and directed by Engg-in-Charge. Note:- Two runs of cable and one run of earth wire incl PVC conduit will be measured and paid one unit.

S&F, in repair,of GI Pipe 20mm dia light grade with all fittings laid in road cutting/floor/on wall for cable protection ,complete all as specified and directed by Engg-in-Charge.

S&F MCB DB SPN 4 Way double door type 215V with Neutral/bar and Earth connectors ,complete all as specified and directed by Engg-in-Charge.

S&F MCB SP 06 to 32 Amps 10KA with common connector ,complete all as specified and directed by Engg-in-Charge.

S&F MCB SPN 32 Amps 10 KA ,complete all as specified and directed by Engg-in-Charge.

S&F energy efficient light emmitting light fitting 1x 20 watt, four feet, white fittings with LED industrial batten for surface mounting applications made with aluminium extrusion and IP 20 degree of protection along with LED rod complete with all accessories & Provn of three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on wall including all necessary fixing accessories complete all as directed (Make- C&S Cat No LTDC30120W LED/WD or quivalent Make of Havells/CG/Philips/Bajaj

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35sq mm 3.5 core ,complete all as specified and directed by Engg-in-Charge.

Supply and fix 4 poles MCCB 125 Amps, 50 Hz, 415 Volts with ruptruing capacity 35 KA including suitable size sheet metal enclousers complete all as specified and directed by Engr-in-Charge.

S&F, in repair,single pole and neutral enclouser with a two pin and earth and metal clad plug socket complete with one single pole MCB 25 Amp 240 Volts complete all as specified.

M&L for disconnecting split AC of 1.5/2.0 TR capacity including repairs, servicing charging of refrigerant, mounting outdoor on stand/bracket, testing and commissioning,complete all as specified and directed by Engr-in-Charge.

S&F MCB DB SPN 4 Way Double Door type 240 Volts complete all as specified and directed by Engr-in-Charge.

S&F MCB SP 32 Amps 240 Volts ,complete all as specified and directed by Engr-in-Charge.

S&F MCB SPN 32 Amps 240 Volts, complete all as specified and directed by Engr-in-Charge.

Taking down unserviceable LT UG cable 3.5core 35 sqmm 1100 Vols grade from existing trenches ,complete all as specified and directed by Engr-in-Charge.

Supply ,Laying, connecting and testing charging of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in trenches/wall/floor/ducts/along bridges/roof etc. including lugs and cable glands for 35 sqmm 3.5core ,complete all as specified and directed by Engr-in-Charge.

S&F, in repair, of galvanished iron tubing light grade 50mm bore laid in trenches /floors for passing through UG Cable protection strip ,complete all as specified and directed by Engr-in-Charge.

Supply and laying un-reinforced precast concrete cable cover class LV type I, flat size 250mmx150mmx40mm for UG Cable protection strip ,complete all as specified and directed by Engr-in-Charge.

Cutting the existing road/hard standing surfaces to a depth of 60 cm and 0.45 cm width and getting out for laying of GI pipe for UG Cable protection including removing/returning filling with top 15cm thick with PCC 1:2:4 type B1 using 20mm graded stone aggregate and finishing even and fair without using extra cement including disposal of surplus soil ,complete all as specified and directed by Engr-in-Charge.

Shiv Shakti Construction

Vishal Builders