Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.9 LAccepted-AOC 54 KANWALI ROAD DEHRADUN 248001 | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹19.6 L+₹63,410 (3.35%)Rejected-Finance 154 GANDHI MARKET AMBALA CANTT HARYANA 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹20.1 L+₹1.2 L (6.08%)Rejected-Finance GROUND FLOOR F 11 PHASE II MAYAPURI WEST DELHI DELHI 110064 | DELHI | WEST DELHI | DELHI | 110064 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹21 L+₹2.1 L (10.9%)Rejected-Finance 1170 BENGALI MOHALLA NEAR PRABHAKAR HOSPITAL AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹21.1 L+₹2.1 L (11.3%)Rejected-Finance 186 GANDHI MARKET AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| Sl No | Description | Qty | Unit | M/S Sonu Traders L5 | R N Enterprises L8 | Goyal Engineers L6 | CHADHA ENGINEERS L9 | Esha Engineers L2 | kapil enterprises L10 | The Rahul Vig L4 | OMVIN ENTERPRISES LLP L7 | AMIT ENTERPRISES L3 | Saurav Enterprises L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Attending complaints of Repair/Maintaining of street light by disconnecting and Taking UP/down UNSV street /security light/flood fitting etc of any size /capacity /make/type from the pole, reparing of luminaire & cleaning the fitting internally and refixing the light fitting in original position on pole/sentry post/top of building including necessary electrical connection complete.
Note:- if any part required to be replaced, M&L of same item will be measured in items hereafter
The contractor's representative will report to concerned JE E/M at 0900 hrs daily to collect the list of defective street light fitting one will submit the report on the same day before 1730 hrs to JE E/M./AGE E/M
The contractor has to rectify the defects/reports and make the street light servicable with in 72 hours from time the list of defective street lights is handed over to him/her rep by the concerened JE E/M.In case the street light is not made functional for whatsever reason with in the specified time line,an amount of Rs. 100.00 per such defective street light per day will recovered from the amount due to him through RAR /Final Bill.The contractor shall be carry out repair/maint will simentanously both domestic area by engaging seperate team of electrician/technician in order to ensure properly & timely rectification of defects.
The contractor shall be fully responsible for the safety of his men engaged for executing this work and he will provide all requisite safety equipments and clothing to his men and department shall not be responsible for any mishappening/accident/injury to his men.
Vehicle and T&P will be arrange by the contractor. | 1,200 | Each Job | 100 ₹1,20,000 | 250 ₹3,00,000 | 50 ₹60,000 | 150 ₹1,80,000 | 60 ₹72,000 | 200 ₹2,40,000 | 72.8 ₹87,360 | 200 ₹2,40,000 | 40 ₹48,000 Lowest | 60 ₹72,000 |
| 2.00S&F the following items:- | |||||||||||||
| 3.00 | Driver 230 V suitable for 45/60/90/120 watts of existing make suitable of LED street light fitting, complete all as specified and directed by Engr-in-charge | 100 | Each | 300 ₹30,000 | 250 ₹25,000 | 390 ₹39,000 | 200 ₹20,000 | 150 ₹15,000 Lowest | 280 ₹28,000 | 200 ₹20,000 | 300 ₹30,000 | 250 ₹25,000 | 200 ₹20,000 |
| 4.00 | Driver 230 V suitable for 70/120/250 watts of existing make suitable of LED Flood light fitting ,complete all as specified and directed by Engr-in-charge | 50 | Each | 250 ₹12,500 | 250 ₹12,500 | 390 ₹19,500 | 250 ₹12,500 | 150 ₹7,500 Lowest | 320 ₹16,000 | 200 ₹10,000 | 400 ₹20,000 | 250 ₹12,500 | 200 ₹10,000 |
| 5.00 | S&F in replacement twin core PVC sheathed 1100 volt heavy duty cable PVC insulated aluminium conductor cable of size 10 sq mm flat solid conductor including connection for security light complete all as specified and directed by Engr-in-charge | 600 | RM | 25 ₹15,000 Lowest | 25 ₹15,000 Lowest | 25 ₹15,000 Lowest | 30 ₹18,000 | 25 ₹15,000 Lowest | 35 ₹21,000 | 60 ₹36,000 | 40 ₹24,000 | 38 ₹22,800 | 25 ₹15,000 Lowest |
| 6.00 | S&F in replacement twin core PVC sheathed 1100 volt heavy duty cable PVC insulated aluminium conductor cable of size 4 sq mm flat solid conductor including connection for security light complete all as specified and directed by Engr-in-charge | 600 | RM | 20 ₹12,000 | 20 ₹12,000 | 12 ₹7,200 Lowest | 20 ₹12,000 | 15 ₹9,000 | 35 ₹21,000 | 35 ₹21,000 | 26 ₹15,600 | 40 ₹24,000 | 16 ₹9,600 |
| 7.00 | S&F in replacement Thermoplastic cable junction box of size 150X125X100 mm with 02 Nos PVC gland, weather proof with IP 65/66 protection for outdoor installation with nut and bolt mounted on bus bars including connection with existing cable and duly fixed with and including MS clamp made out of FI 40 x 3 mm thick with nut & bolt complete all as specified and directed. | 300 | Each | 500 ₹1,50,000 | 976 ₹2,92,800 | 690 ₹2,07,000 | 1,200 ₹3,60,000 | 690 ₹2,07,000 | 550 ₹1,65,000 | 450 ₹1,35,000 Lowest | 800 ₹2,40,000 | 775 ₹2,32,500 | 600 ₹1,80,000 |
| 8.00 | Taking down/out old Street light of any type / wattage and Supply and fixing LED street light fittings 120 watts, input 120 volts to 280 volts volts, life > 25000 Hrs, color temperature 5700K, initial efiicacy>= 100 lm/watt ,IP 66 , high pressure Die cast aluminium housing with weather proof gasket for lamp . the driver must be constant current type having power factor >0.90 with short circuit protection , open circuit protection, reverse circuit protection, high voltage protection, protection against 5 KV high surges, necessary connection with multistranded copper conductor cable 3 core 1.0 sqmm for connection complete all as specified and directed . | 40 | Each | 3,350 ₹1,34,000 | 3,450 ₹1,38,000 | 2,600 ₹1,04,000 | 2,700 ₹1,08,000 | 2,550 ₹1,02,000 | 6,150 ₹2,46,000 | 2,500 ₹1,00,000 Lowest | 2,600 ₹1,04,000 | 2,850 ₹1,14,000 | 2,900 ₹1,16,000 |
| 9.00 | All as per BOQ srl item No. 8.00 here-in-above but for 90 watt complete all as specified and directed. | 58 | Each | 2,350 ₹1,36,300 | 2,450 ₹1,42,100 | 2,100 ₹1,21,800 | 1,800 ₹1,04,400 Lowest | 1,850 ₹1,07,300 | 4,050 ₹2,34,900 | 1,900 ₹1,10,200 | 2,300 ₹1,33,400 | 2,250 ₹1,30,500 | 2,200 ₹1,27,600 |
| 10.00 | All as per BOQ srl item No. 8.00 here-in-above but for 60 watt complete all as specified and directed. | 82 | Each | 2,000 ₹1,64,000 | 1,980 ₹1,62,360 | 1,650 ₹1,35,300 | 1,500 ₹1,23,000 | 1,650 ₹1,35,300 | 3,700 ₹3,03,400 | 1,800 ₹1,47,600 | 2,000 ₹1,64,000 | 1,475 ₹1,20,950 Lowest | 1,700 ₹1,39,400 |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
2 Aug 2025, 6:00 pmClosed
GE AF AMBALA
GE AF AMBALA
REPAIR/MAINT AND REPLACEMENT OF STREET LIGHTS, FLOOD LIGHTS, PERIMETER LIGHT, HIGH MAST LIGHT AND ALLIED ITEMS IN DOMESTIC AREA AT AFS AMBALA UNDER GE (AF) AMBALA
2025_MES_718739_1
GE AF/AMB-T-38/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE AF AMBALA
ALL AS PER NIT AND TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE AF AMBALA
₹92,000
Yes
2 Sept 2025
5 Jul 2025
4 Aug 2025
5 Jul 2025
2 Aug 2025
19 Jul 2025
7 Jul 2025 - 12 Jul 2025
Amount
Attending complaints of Repair/Maintaining of street light by disconnecting and Taking UP/down UNSV street /security light/flood fitting etc of any size /capacity /make/type from the pole, reparing of luminaire & cleaning the fitting internally and refixing the light fitting in original position on pole/sentry post/top of building including necessary electrical connection complete. Note:- if any part required to be replaced, M&L of same item will be measured in items hereafter The contractor's representative will report to concerned JE E/M at 0900 hrs daily to collect the list of defective street light fitting one will submit the report on the same day before 1730 hrs to JE E/M./AGE E/M The contractor has to rectify the defects/reports and make the street light servicable with in 72 hours from time the list of defective street lights is handed over to him/her rep by the concerened JE E/M.In case the street light is not made functional for whatsever reason with in the specified time line,an amount of Rs. 100.00 per such defective street light per day will recovered from the amount due to him through RAR /Final Bill.The contractor shall be carry out repair/maint will simentanously both domestic area by engaging seperate team of electrician/technician in order to ensure properly & timely rectification of defects. The contractor shall be fully responsible for the safety of his men engaged for executing this work and he will provide all requisite safety equipments and clothing to his men and department shall not be responsible for any mishappening/accident/injury to his men. Vehicle and T&P will be arrange by the contractor.
S&F the following items:-
Driver 230 V suitable for 45/60/90/120 watts of existing make suitable of LED street light fitting, complete all as specified and directed by Engr-in-charge
Driver 230 V suitable for 70/120/250 watts of existing make suitable of LED Flood light fitting ,complete all as specified and directed by Engr-in-charge
S&F in replacement twin core PVC sheathed 1100 volt heavy duty cable PVC insulated aluminium conductor cable of size 10 sq mm flat solid conductor including connection for security light complete all as specified and directed by Engr-in-charge
S&F in replacement twin core PVC sheathed 1100 volt heavy duty cable PVC insulated aluminium conductor cable of size 4 sq mm flat solid conductor including connection for security light complete all as specified and directed by Engr-in-charge
S&F in replacement Thermoplastic cable junction box of size 150X125X100 mm with 02 Nos PVC gland, weather proof with IP 65/66 protection for outdoor installation with nut and bolt mounted on bus bars including connection with existing cable and duly fixed with and including MS clamp made out of FI 40 x 3 mm thick with nut & bolt complete all as specified and directed.
Taking down/out old Street light of any type / wattage and Supply and fixing LED street light fittings 120 watts, input 120 volts to 280 volts volts, life > 25000 Hrs, color temperature 5700K, initial efiicacy>= 100 lm/watt ,IP 66 , high pressure Die cast aluminium housing with weather proof gasket for lamp . the driver must be constant current type having power factor >0.90 with short circuit protection , open circuit protection, reverse circuit protection, high voltage protection, protection against 5 KV high surges, necessary connection with multistranded copper conductor cable 3 core 1.0 sqmm for connection complete all as specified and directed .
All as per BOQ srl item No. 8.00 here-in-above but for 90 watt complete all as specified and directed.
All as per BOQ srl item No. 8.00 here-in-above but for 60 watt complete all as specified and directed.
All as per BOQ srl item No. 8.00 here-in-above but for 45 watt complete all as specified and directed.
Supply and fixing in replacement LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, complete all as specified and directed.
S&F in replacement LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, complete all as specified and directed.
S&F in replacement of 8 -10 KW over 1 phase automatic street light switch for automatic switching of street light based on LUX level of natural light. The infrared sensor based on nature switch along with Contactor 63 Amp per phase, MCB SP for input and out put 63 amp wiring for main load 16 sqmm copper should be enclosed in pole/wall mounted enclosure made out of rust proof, electric shock proof, termite proof and FR grade SMC junction box conforming to IP 54, complete all as specified and directed.
S&F in replacement of 25 KW equally distributed over 3 phase (8 KW/Phase) automatic street light switch for automatic switching of street light based on LUX level of natural light. The infrared sensor based on nature switch along with Contactor 63 Amp per phase, MCB SP for input and out put 32 amp wiring for main load 16 sqmm copper should be enclosed in pole/wall mounted enclosure made out of rust proof, electric shock proof, termite proof and FR grade SMC junction box conforming to IP 54, complete all as specified and directed.
M&L for painting of steel tubular swaged poles/ single swan neck poles of street lights including brackets with bracket/fitting etc complete by scrubing old deteriorated paint preparing the surfaces by one coat of primer followed by two coats of aluminium paint including Air force colour strip of two coats of synthetic enamel paint upto 1.5 mtr height, writing pole no. is black base complete all as specified and directed by engr-in- charge.
S&F in replacement contactor 63 Amp 4 pole for timelite distribution board complete with all electrical connection after dismantling old one all as directed at site, complete all as specified and directed.
S&F nature swich for switching on < 60 Lux & Switching Off > 10 Lux along with part night operation facility of min 4 hrs to max12 hrs to be fitted inside existing box complete with all electrical connection after dismantling old one all as directed at site, complete all as specified and directed.
Taking down/lowering carefully by manual or motorised handle of High mast light fitting of 15-20m High for repairing of unsv light and refixing the same after repairing of unsv lights. if any part required to be replaced, M&L of same item will be measured in items here after, complete all as specified and directed.
S & F in repair LED driver 200/250 Watt (as per sample) to 15- 20 Mtr High Mast light fitting complete all as specified and directed.
S & F in repair Metallic flexible conduit 20 mm dia with suitable size of clamp,nut bolts for High Mast light fitting/ street light fittings complete all as specified and directed.
M & L for repair of control panel of high mast light with replacement of internal copper wiring , volt meter, amp meter, slectctor switch, TPN MCB 63 Amps and copper wire 10 sqmm from control panel to high mast motor complete all as directed by Engr -in- chrage at site
Taking UP/down /dismatling of 3 Phase power tool electric motor of high mast light and rewinding of burnt copper winding wire of suitable guage including insulating material , bearing , rod, suitable size chain, internal wiring, winch gear box , mechinical torque limitor , wire rop champ and bobbing aggangement complete all as per site requirement or all as directed by Engr-in- Charge at site.
S&F in replacement energy efficient LED Flood light fitting of 250 watt and input voltage 230 VAC, 50 Hz with ingress protection -IP 65 with CRCA housing including fixing arrengment like clamp nut bolts and washers complete all as specified. CRI > 70, PF>0.90, Min 25000 burning Hrs, complete all as specified and directed.
Taking UP/down existing worn out / damaged steel wire hemp rope and replace with new steel wire rope of 8 mm dia with hemp core rope made in 6x36 pattern of existing make and specifications suitable for 15-20 mtr long high mast light including necessary 'D' clamp, nut, bolt and washers with making for Taking UP/down arrangement T &P like Hydra/ crane as per site requirement complete all as specified and directed.
Lopping / cutting of tree branches from any height and type of trees in route 440 volts LT OH lines complete all as specified and directed. Note :- (i) The tree branches shall be 2 Mtr away from the outer conductor of OH lines after cutting.ii) The cut branches to be removed from site and disposed where directed at a distance not exceeding 150m, complete all as specified and directed.
S & F in replacement of security light bracket made out from GI pipe light grade of size 40mm dia bent to shape having length 1.2 meter including flat iron clamp made of FI 40 mm x 6 mm, nuts, bolts, washers etc duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S & F in replacement of security light bracket made out from GI pipe light grade of size 25 mm dia bent to shape having length 1.2 meter including flat iron clamp made of FI 40 mm x 6 mm, nuts, bolts, washers etc duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F in repair Integral LED aviation light comprising of aluminium housing. with polycarbonate enclosure complete all as directed by Eingr-in- charge
S&F outdoor decorative Post top lantern sphere shape with spun aluminium canopy & die cast aluminium spigot with opal PMMA acrylic diffuser prewired with all accessories of including LED Bulb 15 Watt of B22 base cap complete all as specified and directed by Engr in Charge.
Taking UP/down old Cable form trenches,pole and along the wall and S&F XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor,1100 volt grade,cross sectinal area 25 sq mm 4 core all as specified and directed by Engr-in-charge.
Taking UP/down old Cable form trenches,pole and along the wall and S&F XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor,1100 volt grade,cross sectinal area 16 sq mm 4 core all as specified and directed by Engr-in-charge.
Taking UP/down old Cable form trenches,pole and along the wall and S&F XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor,1100 volt grade,cross sectinal area 35 sq mm 3.5 core all as specified and directed by Engr-in-charge.
S & F end joint kit in replacement for 1.1 KV grade suitable for outdoor/indoor type terminal heat shrinkable type joints with jointing material for 4 core XLPE armoured aluminium conductor cable of size 16 Sq mm, complete all as specified and directed.
S & F end joint kit in replacement for 1.1 KV grade suitable for outdoor/indoor type terminal heat shrinkable type joints with jointing material for 4 core XLPE armoured aluminium conductor cable of size 25 Sq mm , complete all as specified and directed.
S & F end joint kit in replacement for 1.1 KV grade suitable for outdoor/indoor type terminal heat shrinkable type joints with jointing material for 4 core XLPE armoured aluminium conductor cable of size 35 Sq mm, complete all as specified and directed.
S & F joint kit in replacement kit for 1.1 KV grade suitable for straight through heat shrinkable type joints with jointing material for 4 core XLPE armoured aluminium conductor cable of size 16/ 25/35 Sq mm, complete all as specified and directed.
S&F in repair MCCB 63 Amps, 4 pole 16 KA with adjustable thermal release fixed magnet protection commplete all as specified and directed by Engr -in -charge.
S&F in repair tubing light grade galvanised with all fitting laid in road/ with pole / trenches size 40 mm complete all as specified and directed.
Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m depth for laying of cable all specified and directed by Engr-in-charge
Returning, filling in including spreading leveling watering & well ramming in layer not exceeding 25 cm thick in soft/loose soil all as specified and directed.
Removing of excavated surplus soil to a distance not exceeding 50 mtrs. And deposting at a place not exceeding 1.5 mtr specific wide above the starting point complete all as specified and directed.
M&L for sand cushioning to cable with a layer of sand 8cm deep before laying the cable and 15cm deep after laying the cable (punned down to 18cm depth after laying and stretching of cable) complete all as specified and directed Note: Punned down thickness of 18cm shall be measured for payment purpose only.
M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed
M& L for PCC 1:2:4 type B1 ( using 20 mm graded mechanically crushed stone aggregate ) as in floor finished even and smooth without using extra cement, for pole coping including necessay form work complete all as specified and directed
Digging of cable loop of LT XPLE cable of any size including excavation and return filling for end joint/straight through joint kit in replacement for 1.1 KV grade suitable for indoor/outdoor type terminal heat shrinkable type joints with jointing material for 3.5 core XLPE armoured aluminium conductor cable of any size.Note : The respective end/straight through joint will be measured and paid seperately in respective items of joint, complete all as specified and directed.
M&L in replacment true vertical steel tubular, swaged welded pole conforming to IS-2713 part II , type 410 SP 31, 9 metre long complete with mild steel base plate of 6 mm thick of size 300mm X 300mm, finial taper plug, cap, bolts, nuts, washer and screws hole of required size and Nos. for fixing cross arms including painting externally with two coats of aluminium paint over & including one coat of zinc oxide primer for exposed surface and two coats of black bituminious paint for embeded portion in concrete as well as throughout internally including provision of white & blue colour strips with fluorescent paint upto 1.5 mtr height & nubmering of pole complete all as specified & directed. Note:- Excavation, earth work and PCC shall be measured and paid separately.
S&F LED Solar street light fitting 30 Watt with mimimum efficacy 135 lm/watt as per Is 16106:2012 in built, lithium Ferro Phosphate battery of 30 Ah, solar panel, charge controller with dusk down sensor including GI Steel Pipe of 6 mtr in Length complete all as specified and directed
Esha Engineers (BID ID -3372383)
AMIT ENTERPRISES (BID ID -3372120)
The Rahul Vig (BID ID -3375899)
M/S Sonu Traders (BID ID -3364958)
Goyal Engineers (BID ID -3372083)
OMVIN ENTERPRISES LLP (BID ID -3371847)
R N Enterprises (BID ID -3370535)
CHADHA ENGINEERS (BID ID -3372174)
kapil enterprises (BID ID -3380584)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .