Urgent Repair and Renovation of Electrical Installation Work of quarters DRS A-1(1) and DRS A-2(1) for DNB student in Baurghat District Hospital, Dakshin Dinajpur.

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (a) 2+14 Way (Make- (Legrand/ L&T/ Seimens)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make -Legrand/L&T/ Seimens) i) SP 6-32 A

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. ii) DP 63 A (Make -Legrand/L&T/ Seimens)

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket , without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc Make- Legrand/Havells/Anchor (AC & Geyser)

Supply & Fixing 240 V 16 A Piano key type switch Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required (For Geyser) Make- Legrand/Havells/Anchor

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. i) 4 Module

Supply & Fixing on existing DB of OLP 3. starter make Electron Automatic single phase motor starter with VOLTCHECK, AMPCHECK & TIMECHECK. 25 Amp rating, 240 Volt

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles. i) 19 mm dia 3 mm thick polythene pipe without earth continuity wire

Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles. i) 25 mm dia 3 mm thick polythene pipe without earth continuity wire

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required i) 3 x 22/0.3 (1.5 sqmm)

ii) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC (Computer Board, 16A Power Plug)

iii) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC (A.C. Power )

iv) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC (SPNDB)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish i) Average run 8 mtr

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish i) On Board

Finishing of the PVC insulated wire ends by sockenting with pin ring type copper sockets and insulated tapes etc, including supplying sockets, tapes. i)1.5 Sqmm

ii) 2.5 Sqmm

iii) 4 Sqmm

iv) 6 Sqmm

Supply & Delivery LED Tube for existing fittings 250 Volt, 4 Ft. long 18 Watt/20 watt , 2100 lm, LED Tube (Philips- Master LEDTube) (Make- Philips/ Crompton Model-LGT8-20-865-2) [N.S.]

Supply & Delivery 250 Volt, 4 Ft. long 18 Watt Single Fluo. Tube Light fittings (TMC 501 P 1XT-LED 22W P3241) (Make- Philips)/ make-Crompton Model-IS-340-NWH.

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Fixing 240 V, 2 nos 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 2 nos 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (For Fridge, Washing M/C, Mixtur Grinder)

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Computer Board)

Supply & Delivery of 250 Volt, 50Hz 1200mm sweep 1-phase AC ceiling fans incl. all accss., the capacitor of fan must be P-2 type brust proof & must have safety wire directly linked from fan hook to stator of fan, complete with blades, canopy, fork, rubber bush etc. (Make-USHA -STRIKER 1 STAR With Safety wire(PWD)/Crompton, Model- Riviera High Speed or Make -Orient Electric, Model- Summer King)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. Making necy. connections etc.

Supply of Heavy Duty Exhaust fans complete with all accessories having the following Model / Cat No. (Make -EPC Electrical Pvt. Lid.). i) 9"( 230mm ) Speed 1370 RPM.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: i) i) 23 cm (9") [C-4/ 28(a)]

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For GI. i) i) for 23 cm Exhaust fan (9")

S & D 9/10 watt LED Lamp (Make :- Crompton/ wipro/Jaquar/ Bajaj/ Panasonic).

S & F 10/15 watt LED Bulk Head (Make :- Crompton-Model No. LBHP-10 CDL/ wipro/Jaquar/ Bajaj/ Panasonic).

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Excavation of soil for installation of Earth Electrode and filling & ramming. i) For Soft Soil.

Connecting the equipments body to earth busbar incl. S & F 25 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.