Repair of staff quarters, construction of toilet in side dormitory at Hotel Renuka, Renukaji Distt. Sirmour (H.P).

Amount

Dismantling roofing including ridges, hips, valleys and gutters etc., and including stacking of serviceable materials in specified manners and disposal of unserviceable materials as per the direction of Engineer-In-Charge of G.I. Sheet including carriage of materials within all leads, lifts and heights.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish within all leads and lifts and stacking the useful material in specified manners as per the direction of Engineer-In-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:3 (1 cement :3 coarse sand) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing Sal wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering Merino/ Century /Green ply /Kit ply or equivelent make with vertical grains or cross bands and face veneers on both faces of shutters as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 50x50 mm (base and height) 2nd class teak wood moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing commercial ply (9 mm) wood ceiling of approved quality with butt jointing and nails (frame work cover fillets to be paid separately) Merino/ Century /Green ply /Kit ply or equivelent make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Prodiding and fixing 300x600mm 1st quality ceramic glazed tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 20 mm thick cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete Kajaria/Nitco/RAK or equivalent make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Prodiding and fixing 300x300mm 1st quality ceramic glazed tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 20 mm thick cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete Kajaria/Nitco/RAK or equivalent make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing corrugated G.S. sheet Tata make or equivalent roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 fine sand) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Wall painting one or more coats on old work with plastic emulsion paint of approved brand and manufacture to give an even shade as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Painting one or more coats on old work with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 20 mm nominal outer dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete (Finolex/ Supreme/ Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked (heavy duty) including fixing with approved adhesive etc. complete. 110 mm dia. (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked (heavy duty) including fixing with approved adhesive etc. complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 75 mm dia.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked (heavy duty) complete including fixing with approved adhesive etc. complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. . 110 mm dia.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked (heavy duty) complete including fixing with approved adhesive etc. complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 75 mm dia.

Providing and fixing PVC plain bend ISI marked (heavy duty) including fixing with approved adhesive etc. complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. . 110 mm dia.

Providing and fixing PVC plain bend ISI marked (heavy duty) including fixing with approved adhesive etc. complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. . 75 mm dia.

Providing and fixing PVC collers ISI marked (heavy duty) including fixing with approved adhesive etc. complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. . 110 mm dia.

Providing and fixing PVC collers ISI marked (heavy duty) including fixing with approved adhesive etc. complete (Finolex/Supreme/Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 75 mm dia.

Providing and fixing vitreous china wash down water closet Kerovit make CAT No. K0137W or equivalent series of Jal/Jaquar/Cera make as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Providing and fixing vitreous china snow white wash basin Kerovit make Cat No. Casino-K5283 or equivalent series of Jal/Jaquar/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing BIB COCK with wall flange Kerovit make Cat No. KB511005 or equivalent series of Jal/Jaquar/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing angular stop cock with wall flange Kerovit make CAT No. KB511003 or equivalent series of Jal/Jaquar/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing soap dish Kerovit make Cat No. KA930003 or equivalent series of Jal/Jaquar/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing CP Gratting 100 mm dia Chilli make (heavy duty) as per direction of Engineer in charge including carriage of materials upto all leads, lifts and heights.

Providing and fixing 450MM long braided hose with two 15mm nuts and rubber washer without nipple (suitable for geyser ) PVC connection Kerovit make Cat No. KA950001 or equivalent series of Jal/Jaquar/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing CPVC gate valve 20 mm outer dia (Finolex/ Supreme/ Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing 75mm dia PVC floor trap (heavy duty) complete (Finolex/ Supreme/ Vectus make or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing 5 mm thick ornamental looking mirror of Modi Guard Company including grinding complete fixing with necessary clamps as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

NEERAJ KUMAR BALI (BID ID -560568)