REPAIR/ REPLACEMENT OF FLOOR/WALL TILING, PVC FLOORING AND CERTAIN B/R WORKS OF TECHNICAL AND RSIDENTIAL AREA OF DEAL UNDER GE(I) R N D DEHRADUN

Amount

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles .

Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 350x 250x 7 mm/ 450X 350X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but n. exc 2 sq. m each of any description complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

S&F 40 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

Taking down Shutters of any description n. exc 2 sq. m each of any description complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS sqare tube, complete all as specified and directed.

S&F factory made solid PVC moulded door shutters 28 to 30mm thick stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face, with wood free EPS, Supplying and fixing in frame at site as per specifiecation & drawing shown in section 8 of SSR part-II complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed

M & L for preparation of new iron or steel surfaces of any description, over 10cm in width or girth,not applying two coats of synthetic enamel paint over a coat oxide zince chrome primer complete otherwise described complete all as specified and directed

M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed

S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 125 mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed

S&F 125mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed complete all as specified and directed

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.

S&F powder coating anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F powder coating anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified

S&F powder coating anodised aluminium window and ventilator shutters, side hung type without sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing , anodised aluminium snap, rubber packing , anodised aluminium snap beading , screws , anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 No) suitable handle (1 No) complete all as specified and directed.

M&L for 5.5 mm thick sheet glass ordinary quality in panes exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation board/slabs/blankets any thickness including grid work/aluminium frame work, cover fillets complete all as specified.

M & L Gl frame work for seamless ceiling comprising of Gl perimeter channnel .55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to tre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M & L 6 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately)

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position not otherwise specifically provided for and removing demolished materials to a distance exceeding 250 Mtr complete all as specified and directed.

M & L RCC type B-01:2:4 (12.5mm graded stone aggt) for slabs supports on walls complete all as specified and directed

M&L for use and waste form work to soffits of suspended slabs such as roof slabs , floor slabs, landings and similar work for fair finished surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

S&F in repair European wall mounted white vitreous China wash down water closet incluiding hydroulic Seat cover made using high quality made using high quality material fine finishing for elegant asthetic look P/S trap and fulsing arrangement, fixing bolts, flushing cistern ,connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with complete with fixing arrangement fancy look complete all as specified and directed.

S&F in repair vitreous china sqatting pan (orissa pattern) size 580mmx440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and directed

S&F table top vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle , flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed

S&F in repairs vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed

M&L for Running welding in repairs Thickness of metal to be welded exc 9mm but n exc 20 mm coplete all as specified and directed.

M&L for 3.20 / 3.30 Lineoleum , plain colorued, laid dry in floors including streching, cutting and fitting and sealed with approved adhesive complete all as specified and directed.

M&L for PVC SHEET WALL PANELLING of thickness 5mm consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a U Channel at top, bottom and side edges and strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed ( Note- Including all nesscesary fittings and scafolding for heighted site)

S&F powder coated aluminium sliding window two track with two glass shutters aluminium powder coated section aluminium cleat, PVC track, bearing, handle locking arangement, rubber beading etc complte fittings as approved. Note Size of aluminium section shall be under :- (i)Two track top and vertical - Jindal main-2010 section No 20829 or equivalent as appoved by GE (ii) Two track bottom- Jindal main-2010 section No 20830 or equivalent as appoved by GE (iii) Shutter vertical section- Jindal main- 2010 Section 20606 or equivalent as appoved by GE (iv) Shutter top and bottom - Jindal Main-2010 Section 20604 or equivalent as appoved by GE (v) Shutter vertical middle (interlock) -Jindal Main-2010 section 20605 or equivalent as appoved by GE

S&F powder coated aluminium sliding window three track with two glass shutters using 4 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperature 1.61 mm using aluminium powder coated section aluminiuj cleat, PVC track, bearing, handle, lock, rubber beading etc complte fittings. Note Size of aluminium section are as under :- (i) Three track top and vertical - Jindal main-2010 section No 20621 or equivalent as appoved by GE (ii) Three track bottom- Jindal main-2010 section No 20620 or equivalent as appoved by GE (iii) Shutter vertical section- Jindal main- 2010 Section 20606 or equivalent as appoved by GE (iv) Shutter top and bottom - Jindal Main-2010 Section 20604 or equivalent as appoved by GE (v) Shutter vertical middle (interlock) -Jindal Main-2010 section 20605 or equivalent as appoved by GE

M&L for taking out old drapery rod and S&F vertical window blinds made up with vertical louvers, manually operated, with dust guard features, operated by wand control system, of shade and design as approved by the Engr-in-Charge incuuding necessary fittings complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubing down with water etc. complete all as specified and directed.

M&L rendering 15 mm thick cement plaster in two layer i:e 10 mm thick rendering in CM 1:4 in and 5 mm thick setting coat in cm 1:4 with WPC on fair face of brick work and concrete including finishing fair and even complete all as specified and directed.

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of cement base paint over a coat of suitable primer all as specifed and directed.

M&L complete removal of existing treatment of old surface and washing rubbing down and stoping of distempered and painted surface of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed

M&L Brick work with sub class B bricks ,straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed

M&L for Rendering 15 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L preparation of new surfaces plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty all as directed by Engr-in-Charge .

JS CONSTRUCTION COMPANY

M/s Himanshu Tyagi

M/S WASEEM KHAN CONTRACTOR

M/S P K ARORA

Anand Construction & Consultancy

SHREYA INFRA DEVELOPER & CONSTRUCTION COMPANY