Construction of a Protection Chowky at Near Gate, Part 2, Jambuda Round in Bird Sanctuary Range, Khijadiya of MNP Division, Jamnagar

SCHEDULE ‘B’ - BILL OF QUANTITIES

Name of Work : Construction of a Protection Chowky at Near Gate, Part 2, Jambuda Round in Bird

Sanctuary Range, Khijadiya of MNP Division, Jamnagar

Sr. Description of Item (with brief specification and reference to book of

Unit Quantity Rate Amount

No specifications)

Excavation for foundation upto 1.5 m depth including sorting out and

1 stacking of useful materials and disposing off the excavated stuff CuM 108.70 124.61

upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including

2 sorting out and stacking of useful materials and disposing off the CuM 105.07 173.02

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Suppliying of graded stone aggregate of following sizes (for W.B.M.

Road)(3) Crushed stone aggregate for Hard Quality up to 63 mm stze

Spreading the stone aggregate for rolling and W.B.M. including filling

4 the interstices to required camber and gradient (excluding spreading of CuM 21.74 265.83

Blindage)(ii) 40mm to 63mm size aggreagates (H.B.)

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand :

5 4- graded stone aggregates 20 mm nominal size) and curing complete CuM 22.43 3765.41

excluding cost of formwork in (A) Foundation and Plinth

Providing formwork with sheathing steel sheets so as to give a rough

finish including centering shuttering strutting and propping etc. Height of

propping and centering below supporting floor to ceiling not exceeding

4 M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (A) Foundations Footings Bases of Columns etc. and

Mass concrete. (upto 10 ton)

Providing and laying controlled cement concrete M.200 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of columns

and Mass concrete

White Stone Bela mesonry block in course in foundation and plinth with

8 stone of approved quality in Cement Mortar 1:5 (1-Cement :5- course CuM 16.31 6258.26

sand) including packing the joints etc. complete. (upto 10 ton)

White Stone Bela mesonry block in course in superstructure with stone of

9 approved quality in Cement Mortar 1:5 (1-Cement :5- course sand) CuM 22.80 6543.83

including packing the joints etc. complete.

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (B) COLUMNS:(ii) Having cross-

sectional area more than 0.08 Sq.M and upto 0.12 Sq.M

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in(A) BEAMS :(i) Having cross-

sectional area 0.05 to 0.08 Sq.M

Filling in foundation and plinth with murrum or selected soil in layers of

12 20cm. thickness including watering, ramming and consolidating etc. CuM 141.16 301.58

Providing formwork with sheathing steel sheets so as to give a rough

finish including centering shuttering strutting and propping etc. Height of

propping and centering below supporting floor to ceiling not exceeding

13 4 M. and removal of the same for in situ reinforced concrete and plain CuM 7.15 365.37

concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs

Landings and the like. (1) Floors etc. upto 200 mm in thickness. (upto

Providing formwork with sheathing steel sheets so as to give a rough

finish including centering shuttering strutting and propping etc. height of

propping and centering below supporting floor to ceiling not exceeding

4 M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (M) Staircase with sloping or stepped soffits including

risers and stringers excluding landing. (upto 10 ton)

Sr. Description of Item (with brief specification and reference to book of

Unit Quantity Rate Amount

No specifications)

Providing and laying controlled cement concrete M.200 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (E) Staircases excluding landing upto floor two

Providing and laying controlled cement concrete M.200 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (C) Slabs,landing,shelves,Balconies Lintels,

Beams, Girders and Cantilever upto floor two level.

Providing and laying controlled cement concrete M.200 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (B) Walls, from top of foundation level upto

floor two level

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20 mm nominal size) for R.C.C lintel

including finishing smooth with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand :

4- graded stone aggregates 20 mm nominal size) for reinforced concrete

Chhajjas not exceeding 10cm. thickness upto floor two level including

finishing the exposed surfaces with cement mortar 1:3 (1-cement, 3 Fine

sand) to give a smooth and even surface centering and formwork and

curing complete excluding cost of reinforcement.

Providing and Laying controlled cement concrete M.200 and finishing

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforsement for R.C.C work in (iii) Slabs having

more than 10 cm and upto 13 cm. Thickness

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding

22 the cost of reinforcement for R.C.C. work in (B) COLUMNS: (ii) Having cross- CuM 0.49 12493.96

sectional area more than 0.08 Sq.M and upto 0.18 Sq.M Above Floor Two

and Upto Floor Three Level

Providing 10mm thick cement plaster in single coat on concrete ceilingss

for interior plastering upto floor two level and finished even and smooth

in (i)Cement mortar 1:3 (1-cement:3-sand) icluding a Floating Coat of Neat

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

with a floating coat of neat cement slurry

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Ceilling painting (three coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

Wall painting (three coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete .

Sr. Description of Item (with brief specification and reference to book of

Unit Quantity Rate Amount

No specifications)

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

29 L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey SqM 7.50 1009.30

cement slurry mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

30 Cement : 3 coarse sand) and jointed with gray cement slury mixed with SqM 2.39 1159.80

pigment to match the shade of slab including rubbing and polishing etc.

Providing and fixing Shutters with Frame made of CRS sheets of

Guage including necessary Bending, Welding, hinges with necessary

screws etc finished smooth including Three Coat of enamel paint of

TATA/Godrej or equivalent aproved brand for cupboards etc. complete

Providing and laying Granite stone slab flooring over 20mm (average)base

of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty

: 1.5 - coarse sand) laid and jointed with gray cement slurry including

rubbing and polishing complete. (A) Granite slab 18 mm thick

Providing and fixing 35 mm thick panelled ,glazed or panelled and glazed

shutters, for Doors windows and clearstory windows including anodised

alluminium But hinges with necessary screws and indian teak wood

shutters with. (A) Plywood sheet panels.

Providing and fixing extruded aluminum window having extruded

aluminum Colour Powder Coated section frame main outer size 127mm x

38.10mm x 1.35mm (of Jindal Section no:2443,@ Wt.1.384

Kg/mt),horizontal Four track member size 122.20mm x 31.75mm x

1.10mm (of Jindal Section no:8787,@ Wt. 1.205 Kg/mt),vertical member of

size 122.20mm x 31.75mm x 1.50mm (of Jindal Section no:8935,@ Wt.

34 1.398 Kg/mt) with sliding shutters of horizontal member size 40mm x SqM 7.70 2119.14

18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt),vertical

member of size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @

wt.of 0.456Kg/mt/Section 8948,@ Wt. 0.457 Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing

to frame as per details etc complete for window.

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws (A)

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with

colour anodized alluminium frame for ventilation with 5 mm thick frosted

glass as details etc complete for Ventilation

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

37 fixing on existing flooring by adhesive material including dismentaling of SqM 34.58 1458.33

existing flooring and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete for antiskit

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x

8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dado on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

mortar 1:1 including neat cement finishing, watering etc. complete.

Painting three coats (including priming coat) on new wood and wood

based surface with enamel paint, interior to give an even shade including

cleaning the surface of all dirt, dust and other foreign matter sand

papering and stopping.

Sr. Description of Item (with brief specification and reference to book of

Unit Quantity Rate Amount

No specifications)

Painting three coats (including priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

Providing erecting and fixing double coated ISI water tank of required

42 capacity each with all necessary fittings and connection etc. complete on litre 1000.00 3.91

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe

43 shall be fixed on the wall with the help of clamp at every two metre C/C Rmt 6.10 71.93

or shall be concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe

44 shall be fixed on the wall with the help of clamp at every two metre C/C Rmt 12.20 90.93

or shall be concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe

45 shall be fixed on the wall with the help of clamp at every two metre C/C Rmt 12.20 193.73

or shall be concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing and fixing wsh down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in

46 Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be Each 1.00 1343.38

measured and paid for separately)(A) vitreous China Pattern :(i) in white

Providing and fixing plastic seat and cover for wash down water closer

with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover.

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

49 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. Each 1.00 67.24

50 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. Each 1.00 77.97

51 Providing and fixing Rubber plug for sink or wash basin. Each 1.00 16.98

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(F) 75mm

54 Providing and fixing in position cowel went to pipes.(B) 75mm dia. Each 1.00 389.15

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps. (A) 100mm x

100mm size P type.

Sr. Description of Item (with brief specification and reference to book of

Unit Quantity Rate Amount

No specifications)

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A)

100mm dia. Each

Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia.

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete.(ii) 25mm dia.

Providing and fixing 600mm x 450mm bevelled edge mirror of superior

62 glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to Each 1.00 850.90

wooden pluge with C.P. brass screws and washers.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(C) 25mm dia.

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having

weight not less than 35Kg.

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and

filling brickbats with dry masonry work at top for 45cm. height

including covering the top with stone including providing vatas in C.M. 1:3

with finishing curing etc. complete as directed.