S.R. to Govt. Bunglow No. 5 at Shahibaug, Ahmedabad. (Providing Fabricatin work with PUF Panel at First Floor, False Ceiling Work, Door - window Work, Construction of Toilet, Plaster Work, Gate Work, Alluminium Section Work, Colour work and other misc. work)

Name of Work : S.R. to Govt. Bunglow No. 5 at Shahibaug, Ahmedabad. (Providing Fabricatin work with PUF

Panel at First Floor, False Ceiling Work, Door - window Work, Construction of Toilet, Plaster

Work, Gate Work, Alluminium Section Work, Colour work and other misc. work)

Item Quantities Item of work Estimated Rates Unit Total

No. Estimeted In Figures In Words Amount

but may be according to

more or less Estimated

1 4.00 Dismantling doors, windows, ventilators etc. (wood or 187.71 Rupees One Nos.

steel) shutters including chowkhats, architraves, Hundred Eighty

holdfasts and other attachment etc. complete and Seven And Paise

stacking them within all lead and lift. (I) Not exceeding 3 Seventy One Only

2 2.00 Providing and laying cement concrete 1:4:8 (1-Cement : 2680.21 Rupees Two Cum

4-coarse sand : 8- hand broken stone aggregates 40 mm Thousand Six

nominal size ) and curing complete excluding cost of form Hundred Eighty

work in (A) Foundation and Plinth (upto 10 ton) And Paise

Twenty One Only

3 7.00 Brick work using common burnt clay building bricks 4326.75 Rupees Four Cum

having crushing strength not less than 35 kg./Sq.Cm. in Thousand Three

super structure up to floor two level in Cement Mortar Hundred Twenty

1:5. (1- Cement : 5 -fine sand)(B) Conventional. Six And Paise

Seventy Five Only

4 13.00 Half brick masonry in common brunt clay building bricks 640.33 Rupees Six Sqm

having crushing strength not less than 35 Kg/Sq.Cm. in Hundred Forty

Cement mortar 1:4 (1-Cement : 4 -coarse sand ) in super And Paise Thirty

structure upto floor two level (B) Conventional. Three Only

5 7.00 Providing and laying AAC block masonry using factory- 8726.61 Rupees Eight Cum

made Grade-I AAC blocks of density 551–650 kg/m³ Thousand Seven

conforming to IS 2185 (Part 3), in superstructure above Hundred Twenty

plinth level up to floor V level, in cement mortar 1:4 (1 Six And Paise

cement : 4 coarse sand), including cutting, dressing, Sixty One Only

scaffolding, curing, and placing in position complete. The

rate shall include providing and embedding 2 Nos. 6 mm

diameter M.S. reinforcement bars at every third course of

masonry, complete in all respects as directed by the

Engineer-in-Charge.

6 156.00 Providing and applying 15 mm thick mala plaster in single 205.37 Rupees Two Sqm

coat on fair side on brick / concrete wall for interior Hundred Five

plastering in C.M. 1:4 (1 cement : 4 coarse sand) incl. And Paise Thirty

finishing with a floating coat of neat cement slurry. Seven Only

7 2127.00 Providing TMT Bar FE 500D reinforcement for R.C.C. 76.21 Rupees Seventy Kg

work including bending, binding and placing in position Six And Paise

complete upto floor two level. Twenty One Only

8 7.00 Providing and fixing granite slab of 18mm thickness for 2917.44 Rupees Two Sqm

stone jamb on wall, framing etc. on the base of cement Thousand Nine

mortar 1:3 (1-cement : 3-sand) on new surface or fixing Hundred

on existing location by adhesive material including Seventeen And

dismentaling of existing location and jointed with color Paise Forty Four

cement slurry including finised with flush pointing & Only

cleaning the surface etc. To be laid or fixed as per the

direction of the Engineer-in-Charge

Item Quantities Item of work Estimated Rates Unit Total

No. Estimeted In Figures In Words Amount

but may be according to

more or less Estimated

9 169.00 Providing and fixing M.S. grills of required pattern to 101.17 Rupees One Kg

wooden frames of windows etc. with M.S. flats at required Hundred One

spacings and frame alround, square or round bars with And Paise

round headed bolts and nuts or by screws (A) Plain Grill. Seventeen Only

10 9.00 Three Track Window: Providing and fixing Domal Series 3571.11 Rupees Three Sqm

Three Track aluminium window system, partly fixed and Thousand Five

partly sliding type, fabricated from colour anodized Hundred Seventy

aluminium sections comprising outer frame section of One And Paise

size 82.5 × 35 × 1.7 mm, three-track top and bottom Eleven Only

section of size 80 × 45 × 1.5 mm and sliding shutter

section of size 65 × 27 × 1.5 mm complete with provision

of sliding mosquito mesh shutter using powder coated

aluminium frame and fibre/glass mesh. The glazing shall

consist of ordinary quality 6 mm thick glass fixed with

EPDM/rubber gaskets, glazing clips and interlocking clips

of approved size. The item includes rollers, bearings,

locks, handles, nylon wheels, screws, sealant and all

hardware accessories complete with fabrication,

installation, alignment, sealing and finishing in true line

and level as approved by Engineer-in-Charge.

11 66.00 Providing and fixing powder coated alluminium standed 2257.96 Rupees Two Sqm

section fully paneled partition having 1.00 cm x 1.05mm Thousand Two

size grid of alluminium section 63.50 x 38.10 x 1.90 mm Hundred Fifty

panels of 12mm thick both side interior grade I.S, Mark Seven And Paise

pre-laminated particle board or Glass 8mm of approved Ninety Six Only

make and shape incl. providing openable doors and

windows (swing/sliding type shutter) as and where

required and as directed by engineer in charge incl. fixing

in ture line and level at bottom panel top and bottom incl.

all fixture and fastening like glazing clips gasket &

hardware and labour as required etc complete.

12 9.00 Flush Door - Providing and fixing 35 mm thick shutters for 5013.79 Rupees Five Sqm

Doors with Both side Laminate including Indian teak Thousand

Wood Frame 100mm X 75mm including black enamelled Thirteen And

iron oxidized fixtures and fastenings and necessary Paise Seventy

hardware such as hinges, door stopper, handle on both Nine Only

side etc, complete.

13 9328.00 Structural steel work ( Confirming to IS 4923-1997) 127.95 Rupees One Kg

riveted, bolted or welded in builtup for all type sections, in Hundred Twenty

framed work, including cutting, hoisting, fixing in position Seven And Paise

and applying a priming coat of approved steel primer all Ninety Five Only

complete as per the structural designs and directions of

Engineer in charge.Column ( 122 x 61 x 3.6mm )

Item Quantities Item of work Estimated Rates Unit Total

No. Estimeted In Figures In Words Amount

but may be according to

more or less Estimated

14 900.00 Providing, fabricating, supplying and erecting Mild Steel 111.10 Rupees One Kg

(MS) Decorative Entrance Gate of approved size, pattern Hundred Eleven

and design, including MS hollow sections, angles, flats, And Paise Ten

solid bars, sheets and ornamental components required Only

to complete the decorative work, with main frame

fabricated from heavy duty MS sections of adequate

thickness to ensure structural strength and rigidity; the

work shall include cutting, bending, welding, grinding,

shaping, forming decorative scrolls/motifs, proper

assembly of shutters, provision of heavy duty

hinges/pivot arrangement, locking system, handles,

stoppers, base plates, anchor fasteners and all

necessary fixtures; applied with one coat zinc-rich metal

primer and finished with two coats of approved synthetic

enamel paint of approved shade; including transportation,

loading/unloading, handling, erection in true line and

level, alignment, all labour, materials, tools & plants, e as

directed by the Engineer-in-Charge.

15 240.00 Providing and fixing PUF Insulated continueous sandwich 3050.05 Rupees Three Sqm

panels for walls of total thickness not less than 40 mm Thousand Fifty

and width 1.0 m made out from continue line method on And Paise Five

automatic plant.Panel shall have 0.5 mm thick pre coated Only

GI sheet on both side of Polyurethane Foam confirming

to IS 12436:1988.The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS

14246:1995 and shall have zinc coating of minimum

gsm as per IS:277:1992 , 5-7 microns epoxy primer on

both side of the sheet and polyester top coat 15-18

micron.The PPGI Sheet shall have plastic protective

guard film of minimum 25 microns to avoid scratches

during trasportation.The panels shall be vertically joined

together by tongue and groove joints. The PU Foam shall

be self-extinguishing, fire retardant type having minimum

density of 40 Kg/Cu.mt.( +, - 2 Kgs) including 0.25 mm

thick craft paper edging on both edges. The panels shall

be fixed to the steel frame

structure with minimum 5mm thick self tapping GI screws

of required length and nos. with minimum spacing of

16 24.00 Providing and fixing in position Storage unit of any height 16019.28 Rupees Sixteen Sqm

and depth (450/600 mm), fabricated from 18/19 mm Thousand

BWR grade calibrated plywood of approved make, with Nineteen And

shutters made from 12 mm plywood or 6 mm thick glass Paise Twenty

shutters (as specified), complete with openable Eight Only

arrangement. All external and internal surfaces shall be

finished with 1 mm laminate, with batten patti on exposed

edges finished in PU polish and 2 mm PVC edge

banding. The unit shall include soft-close concealed

hinges, soft-close drawer channels (35 kg capacity),

locks, and all necessary hardware, complete as per

approved drawings and instructions of Engineer-in-

Charge/Architect.

Item Quantities Item of work Estimated Rates Unit Total

No. Estimeted In Figures In Words Amount

but may be according to

more or less Estimated

17 52.00 Providing and fixing 8mm thick AC4 wooden laminated 2499.55 Rupees Two Sqm

flooring of size 1285mm x 186mm x 8mm thick moisture, Thousand Four

heat, wear resistent specially formulated particle Hundred Ninety

board/HDF board of approved pattern with core density Nine And Paise

more than 850 gsm/ sq.mt. This flooring shall be Fifty Five Only

comprising of surface guard coating for extra durable

layer and a solid armour. The boards shall consist

moisture resistent,high density core composed of

different layers, comprerssed under extremely high

pressure and temperature to a homogeneous composite.

Joint mechanism between the boards shall be

geometrically shaped tounge and groove construction.

Floor boards shall be laid on polymer sheet and joints

shall be fixed including providing final finishing.

18 20.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 1397.83 Rupees One Sqm

mm (average) base of cement mortar 1:6 ( 1 cement: 6 Thousand Three

coarse sand) on new surface or fixing on existing flooring Hundred Ninety

by adhesive material including dismentaling of existing Seven And Paise

flooring and jointed with color cement slurry including Eighty Three Only

finised with flush pointing & cleaning the surface etc.

complete for antiskit

19 129.00 Providing and filling epoxy grout of " Ardex Endura, Dr. 117.28 Rupees One Rmt

Fixit, MAPAI, Kerakoll " or equivanent make in Parking Hundred

tile flooring of size 800 x 800 mm and having joint width 5 Seventeen And

mm and average joint depth 5 mm including providing Paise Twenty

masking tape 25 mm wide at both side of vitrified tile Eight Only

cleaning the joint upto 5 mm average depth by using wire

brush, air blower and finishing the joint etc. complete as

per direction of Engineer-in-charge.

20 6.00 Providing and laying Vitrified tiles 8 to 10 mm thick , in 1538.85 Rupees One Sqm

skrting risers of steps and dedo on 10mm thick cement Thousand Five

plaster 1:3 (1-cement : 3-coarse sand) and jointed with Hundred Thirty

white cement slurry Eight And Paise

Eighty Five Only

21 20.00 Providing and laying white/ coloured glazed tiles 6mm 917.25 Rupees Nine Sqm

thick in flooring treads of steps and landing laid on a bed Hundred

of 12mm thick cement mortar 1:3 (1-cement : 3- coarse Seventeen And

sand ) finishing with flush pointing in white cement. Paise Twenty

22 107.00 Providing and laying coloured glazed tiles of the size 300 1441.22 Rupees One Sqm

mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in Thousand Four

skirting, risers of steps and dedo on 10 mm. thick cement Hundred Forty

plaster 1:3 (1 cement : 3 coarse sand) & jointed with One And Paise

white cement slurry. Twenty Two Only

23 218.00 Providing and fixing Natural River Polish Stone of 2171.50 Rupees Two Sqm

approved make, colour and texture, machine-cut and Thousand One

factory river-finished, of approved size and 20 mm Hundred Seventy

thickness, fixed over prepared cement mortar bed (1:4) One And Paise

or polymer-modified tile adhesive as directed by the Fifty Only

Engineer-in-Charge. The stone shall be laid to proper

line, level and slope with uniform joints of 3 to 5 mm,

joints filled with matching epoxy/cement grout, including

cutting, dressing, edge finishing, rubbing, cleaning,

wastage, curing, scaffolding (if required), all labour,

materials, tools and tackles, transportation, loading,

unloading, royalty, taxes and all incidental charges

complete as per approved drawings and specifications.

Item Quantities Item of work Estimated Rates Unit Total

No. Estimeted In Figures In Words Amount

but may be according to

more or less Estimated

24 353.00 Applying two coats of putty & two coats of primer of 119.82 Rupees One Sqm

approved brand And Wall painting (two coats) with plastic Hundred

emulsion paint as approved by the Engineer - in - charge Nineteen And

over lapi putty and priming coat of approved brand primer Paise Eighty Two

on undecorated wall surface to give an even shade incl. Only

thoroughly brushing the surface from mortar dropping &

other foreign matter & sand papered smooth.

25 147.00 Finishing wall with weather proof exterior emulsion paint 114.53 Rupees One Sqm

on wall surface (two coats) to give an required shape Hundred

even shade after thoroughly brushing the surface to Fourteen And

remove all dirt, and remains of loose powdered materials Paise Fifty Three

etc. complete. Only

26 360.00 Painting two coats on new steel and other metal surface 122.49 Rupees One Sqm

with enamel paint including one coat of priming coat), Hundred Twenty

brushing, interior to give an even shade including Two And Paise

cleaning the surface an even shade including cleanicn Forty Nine Only

the surface of all dirt, dust and other foreign matter.

27 240.00 Providing and fixing at all height on all floors , false ceiling 929.20 Rupees Nine Sqm

of 12.5 mm thick tapered edge gypsum board conforming Hundred Twenty

to IS :2095 including providing and fixing of frame work Nine And Paise

made of special sections and consisting of angle cleats of Twenty Only

size 25mm wide x 1.6mm thick with flanges of 22mm and

37mm at 1200mm centre to centre one flange fixed to

the ceiling with dash fastener with 6mm dia bolts to the

angle hangers of required length, and other end of

angle hanger being fixed with nut and bolts to G.I.

channels running at the rate of 1200mm centre to centre

to which the ceiling section 0.5mm thick bottom wedge of

80mm with tapered flanges of 26mm each having clips of

10.5mm at 450mm centre to centre shall be fixed in a

direction perpendicular to G.I. channel with connecting

clips G.I. wire at every junction including fixing the

gypsum board with ceiling section and perimeter

channels 0.5mm thick As per the site condition size can

vary, the entire job is to be carried out as per the

instruction and satisfaction of engg in charge complete in

28 240.00 Carring out plinth treatment to post construction / existing 105.95 Rupees One Sqm

structure by spraying chemical solution for termite control Hundred Five

treatment including labour and material consistment with And Paise Ninety

I.S.I specification. Using Chlordene and Chiorpurfiles 20 Five Only

EC. As Per 6131_paret-II Consentration Weight one

percent is recommended i.e one litre 20 EC chemical

emulsion with 19 liter give 1 % concrentration inclusive of

one litre chemical emulsion appication at the rate of

Litre chemical / Sqm of surface is recommended as per

29 50.00 Providing and applying two coats of high performance 505.95 Rupees Five Sqm

and Ultra flexible polymer modified elastomeric water Hundred Five

proofing membrane, having two components, Brushbond And Paise Ninety

UltraFlex of Fosroc or approved equivalent for water Five Only

proofing of RCC water tanks. Cleaning the RCC/Plaster

surface of tank throughly, complete all as per direction of

Engineer in charge.

Item Quantities Item of work Estimated Rates Unit Total

No. Estimeted In Figures In Words Amount

but may be according to

more or less Estimated

30 50.00 Cement Vata : Providing cement vata (10cm. x 10 cm. 23.68 Rupees Twenty Rmt

size) quarter round in cement mortar 1:1 including neat Three And Paise

cement finishing, watering etc. complete at all floors / all Sixty Eight Only

levels / all heights

31 60.00 Providing & Applying two coat of Dr. Fixit / Sika / Fosroc 334.05 Rupees Three Sqm

Waterproofing treatment including throughly brushing the Hundred Thirty

surface free from motar dropping and other foreign Four And Paise

matter & masonary surface fully cured & dried before Five Only

32 56.00 Providing and fixing 10 to 12mm thick clear toughened 1811.94 Rupees One Sqm

glass partition including SS fittings, silicone sealant, Thousand Eight

cutting, fixing and finishing complete as directed by Hundred Eleven

Engineer-in-Charge. And Paise Ninety

33 10.00 Providing and fixing concealed center point to wall ceiling 166.86 Rupees One Rmt

& floor CPVC (SDR 13.5) PIPE having National Hundred Sixty

Sanitation Foundation (NSF) seal for potable water of Six And Paise

following dia. nominal bore tube fittings and clamps Eighty Six Only

including making good the wall, ceiling and floor etc.

complete.[C] 15 mm dia.

34 10.00 Providing and fixing concealed center point to wall ceiling 249.72 Rupees Two Rmt

& floor CPVC (SDR 13.5) PIPE having National Hundred Forty

Sanitation Foundation (NSF) seal for potable water of Nine And Paise

following dia. nominal bore tube fittings and clamps Seventy Two Only

including making good the wall, ceiling and floor etc.

complete.[C] 25 mm dia.

35 10.00 Providing laying and jointing in true line and level 15mm 72.65 Rupees Seventy Rmt

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including Two And Paise

fittings as approved by Engineer In Charge. Pipe shall be Sixty Five Only

fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

36 10.00 Providing laying and jointing in true line and level 25mm 91.84 Rupees Ninety Rmt

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including One And Paise

fittings as approved by Engineer In Charge. Pipe shall be Eighty Four Only

fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

37 12.00 Providing laying and jointing in true line and level 40mm 148.12 Rupees One Rmt

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including Hundred Forty

fittings as approved by Engineer In Charge. Pipe shall be Eight And Paise

fixed on the wall with the help of clamp at every two Twelve Only

metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials

38 12.00 Providing laying and jointing in true line and level 50mm 195.67 Rupees One Rmt

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including Hundred Ninety

fittings as approved by Engineer In Charge. Pipe shall be Five And Paise

fixed on the wall with the help of clamp at every two Sixty Seven Only

metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials

Item Quantities Item of work Estimated Rates Unit Total

No. Estimeted In Figures In Words Amount

but may be according to

more or less Estimated

39 15.00 Providing, laying and jointing in true line and level 160 831.22 Rupees Eight Rmt

diametre U.P.V.C (Type B) conforming to IS 13592-1992 Hundred Thirty

with one end plain and other end socketed with rubber One And Paise

ring, & fittings conforming to ISI 14735-1999 of approved Twenty Two Only

make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size 160 mm diametre

x 210 mm length x 196 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with

adhesive solvent cement

including cost of all materials.

40 10.00 Providing and fixing to wall ceiling and floor 6.0 Kg. 122.21 Rupees One Rmt

F/Cm2 working pressure poluthene pipes of the following Hundred Twenty

outside Dia. Low densidy, complete with special flange Two And Paise

compression type fittings, wall clipsetc. including making Twenty One Only

good the wall ceiling and floor.(A) 50 mm

41 10.00 Providing and fixing to wall ceiling and floor 6.0 Kg. 182.25 Rupees One Rmt

F/Cm2 working pressure poluthene pipes of the following Hundred Eighty

outside Dia. Low densidy, complete with special flange Two And Paise

compression type fittings, wall clipsetc. including making Twenty Five Only

good the wall ceiling and floor.(A) 75 mm

42 15.00 Providing and fixing to wall ceiling and floor 6.0 Kg. 296.44 Rupees Two Rmt

F/Cm2 working pressure poluthene pipes of the following Hundred Ninety

outside Dia. Low densidy, complete with special flange Six And Paise

compression type fittings, wall clipsetc. including making Forty Four Only

good the wall ceiling and floor.(A) 110 mm

43 1.00 Providing and fixing wall hung/Floor mounted or as 11149.91 Rupees Eleven Nos.

equivalent as approved by engineer incharge European Thousand One

WC P or S trap of make cera, Jaquar, Parryware or Hundred Forty

Equivalent , chair Bracket completeset with required all Nine And Paise

internal fitting for flushing system etc. complete. Ninety One Only

44 1.00 Providing and fixing Hand shower (Health Faucet) 1 1509.95 Rupees One Nos.

meter PVC Tube with wall hook of Jaquare , Plumber or Thousand Five

equivelant brand including necessary hardware and other Hundred Nine

consumable and labor etc complete. as approved by And Paise Ninety

engg. in charge . Five Only

45 4.00 Providing and fixing Angular stop cock with wall flange of 1460.73 Rupees One Nos.

Jaquare , Plumber or equivelant brand including Thousand Four

necessary hardware and other consumable and labor etc Hundred Sixty

complete. as approved by engg. in charge . And Paise

46 1.00 Providing and fixing Tabale top type basin of Cera , 5181.18 Rupees Five Nos.

Jaquar, Parryware or Equivalent with cunter CI / MS / SS Thousand One

clamps or fastener including of fitting and brackets cutting Hundred Eighty

and makeing good the walls wherever required including One And Paise

S.S. bracket. Eighteen Only

47 2.00 Providing and fixing Bib cock with wall flange of Jaquare , 2198.98 Rupees Two Nos.

Plumber or equivelant brand including necessary Thousand One

hardware and other consumable and labor etc complete. Hundred Ninety

as approved by engg. in charge . Eight And Paise

Ninety Eight Only

Item Quantities Item of work Estimated Rates Unit Total

No. Estimeted In Figures In Words Amount

but may be according to

more or less Estimated

48 1.00 Providing and fixing Single Lever Basin Mixer foam 4881.25 Rupees Four Nos.

flow with wall flange of Jaquare, Plumber or equivelant Thousand Eight

brand including necessary hardware and other Hundred Eighty

consumable and labor etc complete. as approved by One And Paise

engg. in charge. Twenty Five Only

49 1.00 Providing and fixing 600mm x 450mm bevellednedge 833.73 Rupees Eight Nos.

mirrror of superior glass mounted on 6mmnthick A.C. Hundred Thirty

sheet or plywood sheet and fixing to wooden pluge with Three And Paise

C.P. brass screws and washers. Seventy Three

50 1.00 Providing and fixing Single Lever Shower Mixer with 3- 6581.18 Rupees Six Nos.

way diverter foam flow with wall flange including spout Thousand Five

with provision Hand shower of Jaquare , Plumber or Hundred Eighty

equivelant brand including necessary hardware and One And Paise

other consumable and labor etc complete. as approved Eighteen Only

by engg. in charge .

51 1.00 Providing and fixing Overhead shower 240 mm dia. Or 3306.34 Rupees Three Nos.

more of Jaquare , Plumber or equivelant brand including Thousand Three

necessary hardware and other consumable and labor etc Hundred Six And

complete. as approved by engg. in charge . Paise Thirty Four

52 2.00 Providing and fixing Soap Dish of Jaquare, Plumber or 1288.48 Rupees One Nos.

equivelant brand including necessary hardware and other Thousand Two

consumable and labor etc complete. as approved by Hundred Eighty

engg. in charge. Eight And Paise

Forty Eight Only

53 1.00 Providing and fixing Toilet Paper Holder of Jaquare , 1436.13 Rupees One Nos.

Plumber or equivelant brand including necessary Thousand Four

hardware and other consumable and labor etc complete. Hundred Thirty

as approved by engg. in charge . Six And Paise

54 4.00 Providing and fixing Corner Glass Shelf of Jaquare, 1756.03 Rupees One Nos.

Plumber or equivelant brand including necessary Thousand Seven

hardware and other consumable and labor etc complete. Hundred Fifty Six

as approved by engg. in charge. And Paise Three

55 2.00 Providing and fixing cast iron (spun) nahni trap of the 606.08 Rupees Six Nos.

following nominal diameter of self cleanisingdesign with Hundred Six And

C.I. scread down or hinged grating incl. cost of cutting & Paise Eight Only

making good the walls and floors 100 mm intel and

56 1.00 Providing and fixing Towel Rack 24" of Jaquare , 3306.34 Rupees Three Nos.

Plumber or equivelant brand including necessary Thousand Three

hardware and other consumable and labor etc complete. Hundred Six And

as approved by engg. in charge . Paise Thirty Four

Item Quantities Item of work Estimated Rates Unit Total

No. Estimeted In Figures In Words Amount

but may be according to

more or less Estimated

57 1.00 Providing and fixing Towel Ring of Jaquare , Plumber or 1288.48 Rupees One Nos.

equivelant brand including necessary hardware and other Thousand Two

consumable and labor etc complete. as approved by Hundred Eighty

engg. in charge . Eight And Paise

Forty Eight Only

58 2000.00 Providing erecting and fixing double coated ISI water tank 3.95 Rupees Three Litre

of required capacity each with all necessary fittings and And Paise Ninety

connection etc. complete on terrace. Five Only

59 1.00 Providing and fixing Hand Shower 105mm Round Shape 3158.69 Rupees Three Nos

Single Flow of Jaquare , Plumber or equivelant brand Thousand One

including necessary hardware and other consumable and Hundred Fifty

labor etc complete. as approved by engg. in charge Eight And Paise

Sixty Nine Only

60 1.00 Two Way Bib Cock: Providing ,fixing ,testing 2322.01 Rupees Two Nos

commissioning and keeping in good condition until Thousand Three

project completion of 15mm dia two way bib cock of Hundred Twenty

Plumber, Cera, Jaqure or Equivalent brand including with Two And Paise

all fittings complete as per specification/drawings and One Only

61 1.00 Providing and fixing Metropole of Jaquare , Plumber or 4496.39 Rupees Four Nos

equivelant brand including necessary hardware and other Thousand Four

consumable and labor etc complete. as approved by Hundred Ninety

engg. in charge Six And Paise

Thirty Nine Only

62 1.00 Providing and fixing Brass ball Handle Valve of standard 2235.89 Rupees Two Nos

compny like Zoloto or equivelent and as per directed by Thousand Two

engineer incharge. (A) 25mm dia. Hundred Thirty

63 1.00 Providing and fixing Brass ball Handle Valve of standard 4069.32 Eighty

RupeesNine Only Nos

compny like Zoloto or equivelent and as per directed by Thousand Sixty

engineer incharge. (A) 50mm dia. Nine And Paise

Thirty Two Only

64 1.00 Providing and fixing standared extruded of alluminium 1175.56 Rupees One Sq.m.

section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Thousand One

Kg/mt with colour anodized alluminium frame for Hundred Seventy

ventilation with 5 mm thick frosted glass as details etc Five And Paise

65 73.00 complete for

Providing Ventilation

and Fixing 12 mm thick moisture & fire 722.66 Fifty SixSeven

Rupees Only Sq.m.

resistant heavy duty Cement Fibre Board (High pressure Hundred Twenty

steam cured) Confirming to ISO 4862-2000 in wall panels Two And Paise

of one face of cold formed galvanised light gauge steel Sixty Six Only

frame structure to form wall / partition as & Where

directed by Engineer-in-Charge

75.00 Providing and fixing heavy-duty PVC Mat Flooring of 1874.66 Rupees One Sq.m.

approved make and colour, manufactured from high- Thousand Eight

quality flexible Polyvinyl Chloride (PVC), anti-skid, wear- Hundred Seventy

resistant and water-resistant, of minimum 10–15 mm Four And Paise

thickness (or as specified), laid over clean, level and Sixty Six Only

prepared floor surface. The mat shall be cut to the

required size and shape, fixed with approved adhesive or

loose-laid as directed, including trimming, edge finishing,

making cut-outs around columns and fixtures, joints (if

any) neatly butted and sealed, complete with all labour,

materials, tools, transportation, loading, unloading,

wastage and all incidental charges as per the

manufacturer's specifications and as directed by the

Engineer-in-Charge.

Rupees Forty Six Lakh(s) Ten Thousand Seven Hundred Sixty Eight And Paise Seventy Five Only

Item Quantities Item of work Estimated Rates Unit Total

No. Estimeted In Figures In Words Amount

but may be according to

more or less Estimated

I / We am / are willing to carry out the work at _________________ % above / below percent (Should be written in figures and

words) of the estimated rates mentioned above. Amount of my/our tender works out as under:

*Estimated Amount *Estimated Amount

Put to Tender Rs.________ Put to Tender Rs.________

Deduct _____% below Rs. ________ Add _____% above Rs. ________

Net Rs.________ Net Rs.________

*(Please strike out whicever is not applicable)

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5 Credit of Dismanteled Materials amount Rs. 1550.00 Deducted from 1st R.A. Bill

Deputy Executive Engineer

Dated Signature of the contractor Shahibag (R & B) Sub Division

Executive Engineer

Ahmedabad City (R & B) Division