Tender for supply and installation of furniture and allied works in Finance and Accounts Office at IIMA Main Campus

Amount

Furniture and allied works

Table of size: 5' 0" X 2' 0" X 2' 6" made from 19 mm thick IS-303 MR grade plywood of approved make from GREEN/ CENTURY/ KITPLY make, one side pedestal drawer unit to be provided with 2 Nos of pull out drawers on telescopic runner and one openable shutter below, provision for CPU, keyboard tray, cable manager to be provided, entire unit will be finished with 1mm thick laminate of approved make from Formica/ Sunmica/ Greenlam of desire shade, complete with all necessary hardware like S.S handles, Set locks, S.S hinges Etc. and wooden leaping and two or three coats lacquer polish. complete in all respect. Actual Table top to be measured and paid.

Providing and fixing white Writing writing board of approved make from Formica / Sunmica /Greenlam with 19 mm thick approved plywood backing and 1mm thick white writing board sheet with necessary Glue and wooden leaping, complete with lacquer polish. Actual area to be measured and paid.

Providing and fixing at site Floor mounted / Overhead storage cabinets of 400 mm deep and of any size and length made from 19 mm thick IS-303 MR grade comm plywood from GREEN / CENTURY / KITPLY, necessary shelves, divisions, compartments to be provided as per requirement , entire unit will be covered with 1 mm thick laminate of approved make from Formica/ Sunmica/ Greenlam with wooden leaping and lacquer polish and all required hardware like S.S hinges, handles, set locks, ball catches, stoppers Etc., complete in all respect. Actual area to be measured and paid.

Providing and fixing 12 mm thick Soft Board of approved make from jolly board with 19 mm thick approved plywood backing and wooden leaping and approved shade Fabric covering , complete with lacquer polish by site in charge. (Basic rate of Fabric @ 200/- Per Meter)

Providing and fixing wooden Raceway for Electrification works of size: 6" height X 2" deep made from 2" X 1" wooden members in top and bottom, 6 mm thick approved make plywood at the back and front with 6mm thick MDF with 1 mm thick approved make laminate finish, complete in all respect including necessary cut-outs for swithes, plugs etc. and lacquer polish. Actual length to be measurd and paid.

Providing and fixing 1200 mm or 2700 mm height box type partition made from 2" x 2" teakwood sections appx. 24" C/C both ways with 6mm thick IS-303 com. MR grade 6mm thick ply on both sides and covered with 1 mm thick laminate of approved make and finish on both sides, partition with be partly with 4' 0" high 5 mm clear Glass in middle and partly solid with 6 mm ply on both side and 1mm thick laminate finish. complete with necessary Glass beadings with lacquer polish, complete in all respect. Actual area to be measured and paid.

Providing and fixing at site wooden door made from 30 mm thick flush door with partly Glass and partly solid with 1 mm thick laminate finish on both sides, complete with necessary hardware like door closer, lock, handles, stopper, door stop Etc. complete in all respect with lacquer polish. Actual area to be measured and paid.

Supplying wooden 3 seater sofa as per requirement and approved design made from 1st quality Ghana teakwood, external frame to be made from 3" X 2" Ghana teakwood sections with all necessary horizontal and vertical members as per design, internal frame to be made from 3" X 1.5" teakwood frame in seat and 6" X 1.5" to the shape in back, 100mm thick 40 density U-foam to be provided in seat and 50mm thick 40 density u foam for back, seat and back to be covered with 25mm thick super soft u foam for finishing, 3" wide rubber elastic belt to be provided in seat and 8mm thick plywood to be fixed in back, complete covered with white madarpat cloth after lining work and covered with fabric of approved make and shade to the sofa. All visible wooden members to be polished with lacquer polish finish, complete in all respect and instruction of engineer in charge. ( BASIC RATE FOR FABRIC @ Rs.800.00 PER METER) Actual length to be measured and paid.

Supplying centre teaopy/ side teapoys made from 1st quality Ghana teakwood section of size: 30" X 30" X 14" with horizontal and vertical members as per design, one shelf below the top and Top to be either 19 mm thick ply with laminate finish or 12 mm thick touched glass as per design and instruction of engineer in charge. complete in all respect including lacquer polish to wooden members.

Labour charges for shifting of existing wooden partition using same materials and make it fine for re use. Job includes adding missing materials, hardware and re polishing wood work, complete in all respect.

Design unit interiors

MOOD OF WOOD THE FURNITURE GALLERY