Special repair to Civil Hospital at Nagrota Bagwan Distt Kangra (HP) (Sh-Providing and laying tile flooring, Aluminium work, other Civil work including water supply and sanitary installation etc)

Amount

Dismantling G.I .sheet roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials and removing of material from site of work and as directed by the Engineer-in-Charge, including entire carriage of materials within all leads, lifts and other incidentals

Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating out from R.C.C. Work. for every additional storey height above floor two level. including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge.

Demolition of brick/stone work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead in cement mortar complete as per direction of Engineer- Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking upto any lead as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings windows sills, cornices, arches, moulding, corbelling including curved surfaces where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-Incharge.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders lintels window sills, cornices, arches corbelling including curved surfaces where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriae of material within all leads, lifts and other incidentals as per approved drawing, design, specifications entire satisfaction and as directed by the Engineer-Incharge.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in work in edge of slab and breaks in floors and walls under any thickness including carriae of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge.

Providing and laying cement concrete work 1:2:4 (One Cement : Two Sand : Fopur graded stone aggregate 20 mm (Twenty millimetres) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, columns, doorsbeams, roofs, landings, shelves their supports balconies, beams, girder, bressumers and cantilevers, including entire carriage of materials as per directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete including cost of binding wires complete and other incidentals due for its completion for all floors, including carriage of material as per directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet TATA / Shakti or equinalant in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 10 (Ten) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six milimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required complete including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge.

Providing and fixing ridges or hips 60cm (Sixty centimeters) over all with 0.60mm (Zero point Sixty millimeters) thick prepainted sheet roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Tweny) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimeters) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required complete including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge.

Providing and fixing 6mm (Six millimeters) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) as per approved drawing, design complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 30cm (Thirty centimeters) wide 30cm (Thirty centimeters) deep of 0.60mm (Zero decimal six zero milimetres) thick plain G.I. sheet gutter with iron brackets 40x3mm (Forty into Three milimetres) size dome shape shall be provided which shall be M.S. plate 25x5/6mm Sqm (Twenty five inti five/six millimetres) square round shape with 6mm (Six millimetres) dia bars in dome bolts, nuts and washers etcetera including making necessary connections with rain water pipe complete including carriage of materials within all leads, lifts and other incidentals and further as per specification approved architectural drawing, design and specification as directed by the Engineer-Incharge complete.

Providing and fixing plain M.S. mild steel B.P. sheet 1.66 to 2mm (One point six to two milimetres) thick fixed in eaves board/ceiling/cutting soffits /ceiling including jointing with gas/electric welding in position and applying a coat of red lead primer complete (frame work is to be measured and laid for separately) including carriage of materials within all leads, lifts and other incidentals as per specification approved drawing, design and as directed by the Engineer-Incharge.

Steel work welded in built up sections joints/tubular section channels, angles, tees frame work for ceiling/false ceiling flats with connection plates or angles, cleat as in trusses, trussed purlins main and cross beams, hips jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and; placing in position complete and applying a coat of red lead paint i/c framed work with angle tees 40x6mm (Forty into six milimetres) complete including carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge.

Providing and fixing 10m (Ten millimetres) thick heavy duty double charged vetrified tiles Nitco/Kazaria/Asia/Rak 600x600mmx10mm (Six hundred into Six hundred into ten millimetres) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete, as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and laying duro stone vetrified tiles 300x600mm (Three hundred into six hundred milimetres) Nitco/Kazaria/Asia/Rak in grey/coloured of required shade in skirting risers of steps and dados on 12mm (Elevel milimters) thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete and as per directed by the Engineer- Incharge, including entire carriage of material within all leads, lifts and other incidentals.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco/Kazaria/Asia/Rak 300x300mm (Three hundred into Three hundred millimetres) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and laying 16mm to 20mm (Sixteen millimetres to Twenty millimeters) thick granite stone in flooring 20mm (Twenty millimeters) (average) thickness base of cement mortar 1:3 (One cement : Three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete as per approved drawing, design and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing coloured coated aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws for doors windows and ventilatiors and glazed partitions frames as per direction of Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing coloured coated aluminium work (Shampion shade colour coated) for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws for shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) all complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints with cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints with cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Steel work with 8mm (Eight millimetres) chequered plates welded in single sections including cutting,hoisting,fixing in position and applying a priming coat of red lead paint complete including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Second class brick work using common burnt clay building bricks upto any floor level in cement mortar 1:6 (One cement: Six sand) as per approved drawing, design and as directed by the Engineer-in-Charge, including entire carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: six sand) complete including entire carriage of materials as per directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth including drip course and grooves with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all levels complete including carriage of material within all leads, lifts of materials and other incidentals and as directed by the Engineer-Incharge.

15mm (Fifteen millimetre) thick cement plasters in single coat on brick/concrete/stone walls for exterior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:5 (One cement: Five sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge.

Repair to plaster with cement mortar 1:3 (One cement : Three sand) in patches of 2.50 sqm (Two decimal five zero) square metres upto any thickness including cutting the patches in proper shape and re-plastering the surfacing to the wall including disposal of rubbish to the dumping ground complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Distempering (two coats) with acrylic oil bound washable distemper with Nerolac/ Asian paint of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.

Applying Birla J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 40mm (Forty millimetre) thick full body matt finished vetrified parking tiles 40x40mm (Forty into Forty millimeters) thick of approved shade in flooring and landing laid on a bed of 12mm (Twelve millimeters) thick cement mortar 1:3 (One cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) Jindal and Tata approved quality tube fitting and clamps including making good the wall, ceiling and floor complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing vitreous china water closet squatting pan (Indian type W.C. pan) size 580mm (Five hundred eighty millimeters) Cera, Jaquuar and Hindware (earth work, bed concrete, foot rest and trap to be measured and paid for separately) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 50mm (Fifty millimetres) thick G.I. Inlet connection for flush pipe with W.C. Pan complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing plastic seat (Solid/Hollow type) and cover Cera, Jaquuar and Hindware for wash down water closet with C.P. Brass hinges and rubber buffers complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing vitreous China squatting plate pattern urinal Cera, Jaquuar and Hindware of size 450mmx350mm (Four hundred fifty into three hundred fifty millimetres) with integral longitudinal flush pipe complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing (vitreous China wash basin floor mounted with single hole for pillar tap with C.I. or M.S. brackets painted white Cera, Jaquuar and Hindware including cutting holes and making good the same but excluding fittings complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

550x400mm (Five hundred fifty into four hundred millimetres)

400x400mm (Four hundred into four hundred millimetres)

Providing and fixing 600x450x150mm (Six hundred into Four hundred fifty into One hundred fifty millimetres) vitreous china laboratory sink Cera, Jaquuar and Hindware with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 610x460mm (Six hundred ten into Four hundred sixty millimetres) with bowl depth 200 mm stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetres) nominal size C.P. Brass chain 50cm (Fifty centimetres) size long and rubber plug of following sizes for sink or wash basin Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two milimetres) diameters rubber plug for sink/wash basin ISI make complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetres) dia C.P. Brass waste for wash basin or sink ISI make complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two milimetres) diametres M.I. Union for wash basin or sink ISI make complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred milimetres) diametres C.P brass grating for gully floor or Nahni trap ISI make complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x450mm (Six hundred into Four hundred fifty milimetres) size bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x20mm (Six hundred into Twenty milimetres) size C.P. Brass Towel rail Cera, Jaquuar and Hindware complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x120mm (Six hundred into One hundred twenty milimetres) glass shelf with C.P. brass. (Heavy duty makes) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) diameters long nose brass bib tap (Superior or heavy type) Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) dia long body brass bib tap (Superior or heavy type) Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing C.P. brass bib tap with capstan head (Heavy duty) Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing 15mm (Fifteen milimetres) C.P. brass angle valve without nuts and pipe Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing P.V.C. connection 300x450mm (Three hundred into four hundred fifty millimetres) length with check nut and brass union Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing brass full way valve with wheel Cera, Jaquuar and Hindware complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing brass ball valve (horizontal plunger type) high pressure with polythene plastic floats complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing G.I./M.I Union of for wash basin or sink complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing 1000 (One thousand) litres net capacity tank (THREE LAYER SINTAX, JAI BHARAT, D-PLAST, VECTUS) PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm (Fifteen milimetres) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level (Jai bharat D-plast Vacuts equivalent) complete as per direction of Engineer-Incharge including carriage of material within all leads, lifts and other incidentals.

Providing and fixing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

110x90mm (One hundred ten into Ninety millimetres) nominal size

110x75mm (One hundred ten into seventy five millimetres) nominal size

Providing and fixing PVC spigot and socket pipes Type-B for soil waste and ventilating pipe, including fixing with approved adhesive etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

110mm (One hundred ten milimetres) diametres

50mm (Fifty milimetres) diametres

Providing and fixing 75mm (Seventy five milimetres) diametres PVC door bend with oval access door, insertion rubber washer 3mm (Three millimetres) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

110mm (One hundred ten milimetres) diametres

75mm (Seventy five milimetres) diametres

Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

110x90mm (One hundred ten into ninety milimetres) diametres

90x75mm (Ninety into Seventy five milimetres) diametres

Providing and fixing PTMT Coloured/white high density polyethylene / poly propylene 10.00 ltrs (Ten litres) capacity (full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (Fifteen millimetres) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (Forty millimetres) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred milimetres) nominal size sand cast / cast iron spun spigot and socket soil, waste and ventilating pipes (Lead caulked joints to be measured and paid for separately) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe Cera, Jaquuar and Hindware in cement mortar 1:1 (One cement : One sand) Angle Indian Universal closet (Seat and over to be measured and paid for separately complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing sand cast iron 100mm (Hundred milimetres) size P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (one cement: one sand) complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Ranju Bala Sood

ARIT SOOD

Harbhajan singh