Tripura

Cancelled

Works

Civil Works

Mtc. Of Govt. residential building during the year 2026- 27 SH Providing and fitting fixing of Aluminium framed windows in different type quarters at Malanchaniwas Govt. Quarter Complex, Agartala under the jurisdiction of Central-I Sub-Divisi

New corrigendum available: Cancellation of Tender #1.

Chief Engineer, PWD (R and B)

Kunjaban | West Tripura, Tripura

Amount: ₹9.4 LCloses: 2 Sept 2026Closed

Timeline

Published25 Aug 2026
Closed2 Sept 2026
Cancelled9 Sept 2026

Corrigenda

Corrigendum

1 updatesLatest on 15 Sept 2026

Cancellation Details

Cancellation of Tender

Cancellation of TenderCancelled as no bid receivedReason: No Bids receivedDocument: cancelled_1.pdf

Published 9 Sept 2026

Tender Value

₹9.4 L

EMD Value

₹18,886

Closing Date

2 Sept 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

EE, CCD, Kunjaban Extension

Address

o/o the EE, CCD, Kunjaban Extension

Work Description

Mtc. Of Govt. residential building during the year 2026- 27 SH Providing and fitting fixing of Aluminium framed windows in different type quarters at Malanchaniwas Govt. Quarter Complex, Agartala under the jurisdiction of Central-I Sub-Divisi

Tender Information

Tender ID

2026_CEPWD_76302_1

Reference Number

39/DNIT/EE/CCD/PWD/2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

90 days

Location

Kunjaban

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredDetail/Structure of the Organisation/Bidder (Appendix-II) (.pdf)

RequiredDecleration of the bidder (Appendix-III) (.pdf)

RequiredDownloaded DNIT as a proof of acceptance of all terms conditions in the DNIT (.pdf)

RequiredUndertaking by the bidder(if any) (.pdf)

RequiredContractor Certificate as per Appendix-I (.pdf)

RequiredPWD Form-7 (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,000

EMD Fee Amount

₹18,886

Important Dates

Last Activity

9 Sept 2026

Published

25 Aug 2026

Bid Opening

2 Sept 2026

Download Starts

26 Aug 2026

Download Ends

2 Sept 2026

Submission Starts

26 Aug 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (4 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-
1.01	For fixed portion of approved quality: - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).	720	Kg	474.1	₹3,41,352
1.02	For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).	382.8	Kg	555	₹2,12,454
2Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-
2.01	With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )	316.8	Sqm.	1,161.9	₹3,68,089.92
3	12 mm cement plaster of mix i) Cement mortar 1:4 (1 cement : 4 fine sand)	100	sqm	224.2	₹22,420

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Bid Opening Summary

finance_77677.pdf

PDF

Cancellation Documents

cancelled_1.pdf

pdf • 0.46 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 4.31 MB

Work Item Documents

fdnit.pdf

Tender Documents • 3.50 MB

BOQ_77677.xls

BOQ • 0.28 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-
1.01	For fixed portion of approved quality: - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).	720	Kg	474.1	₹3,41,352
1.02	For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).	382.8	Kg	555	₹2,12,454
2Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-
2.01	With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )	316.8	Sqm.	1,161.9	₹3,68,089.92
3	12 mm cement plaster of mix i) Cement mortar 1:4 (1 cement : 4 fine sand)	100	sqm	224.2	₹22,420

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :-

1.01

For fixed portion of approved quality: - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).

720

474.1

₹3,41,352

1.02

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):- - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).

382.8

555

₹2,12,454

2Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-

2.01

With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )

316.8

Sqm.

1,161.9

₹3,68,089.92

12 mm cement plaster of mix i) Cement mortar 1:4 (1 cement : 4 fine sand)

100

sqm

224.2

₹22,420