Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹54.7 LAccepted-AOC | 1 | Accepted-AOC Lowest 1 | |
| 2 | 2₹55.2 L+₹41,736.60 (0.76%)Rejected-Finance | 2 | Rejected-Finance higher bid | |
| 3 | 3₹58.7 L+₹3.9 L (7.10%)Rejected-Finance 108 3 CHANDAR NAGAR DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | 3 | Rejected-Finance higher bid |
Tender Value
Refer Docs
EMD Value
₹1.3 L
Closing Date
4 Feb 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DGM (E/M)
Office of DGM(E/M) UAPMB
Construction of remaining work of pack house at Raithal block Bhatwari in District Uttarkashi under the scheme of Rural Infrastructure Development Fund RIDF
2023_UAPMB_54188_1
Re-Etender61/20.01.23
Open Limited
Miscellaneous Works
Item Wise
180 days
Bhatwari, Uttrakashi
Please refer Tender documents.
3 documents required · 3 mandatory
₹4,720
DGM (E/M) U.K.A.P.M.B.
₹1.3 L
Dehradun
25 Mar 2023
21 Jan 2023
6 Feb 2023
21 Jan 2023
4 Feb 2023
26 Jan 2023
25 Jan 2023
Amount
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level, 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) (4.1.8)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) (6.1.2)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) (6.4.2)
12 mm cement plaster : 1:4 (1 cement :4 coarse sand) (13.4.1)
12 mm cement plaster :1:6 (1 cement : 6 coarse sand)(13.4.2)
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (13.80)
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer. (13.41.1)
Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm)(13.44.1)
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. (13.47.1)
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture(13.48.3)
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Fixing with adjustable lugs with split end tail to each jamb. (10.14.1.1)
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws(9.21.1)
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (10.2)
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete, Hot finished welded type tubes.(10.16.1)
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm (9.97.4)
Providing and fixing bright finished brass door latch with necessary screws etc. complete :250x16x5 mm. (9.75.2)
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm. (9.100.1)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(2.25)
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.(2.27)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1.5:3 (1 Cement:1.5Coarse Sand : 3 Graded Stone Aggregate 20mm nominal size)(4.5.1)
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid.(17.3.1)
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:15 mm nominal bore.(18.49.1)
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. (18.52.1)
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. (17.7.1)
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe. 32 mm dia.(17.28.2.1)
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore.(18.10.1)
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter.(12.41.2)
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 100mm (12.42.1.2)
Same as above but in Bend 87.5° 110 mm bend (12.42.5.2)
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78mm wide and effective height of 88 mm, weighing not less than 170 gms(17.73.1)
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A
Supplying & Drawing 2 x1.5 sq.mm. of FRLS PVC insultated copper conductor, single core cable in the with surface/recessed steel/ PVC conduit.
2 x 2.5 sq.mm.
Supplying & Fixing of 20 mm. Sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
Supplying and fixing metal box of 150 mm x 75 mm x 60 mm deep(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
Supplying & Fixing of 5/6 amps switch piano type switch/socket on the existing switch box/cover including connections etc. as required.
3 pin 5/6 amps outlet
Supplying and fixing metal box of 180 mm x 100 mm x 60 mm deep(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 anos socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.
Earthing with G.I earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7mtr. Long etc. (with charcoal or coke and salt) as required.
Providing and Laying earth connection FRLSom earth electrode with 6 SWG dia G.I in 15mm dia G.I. Pipe FRL Som earth electrode including connection with copper thimble excavation and re-filling as required.
Supplying and fixing 8 way, Double door and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required, (But without MCB/RCCB/Isolator.
Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
S/F 40 amp. rating, double pole, 240 volts, isolator in the existing MCB DB complete with connetctions, testing & commissioning etc. as required.
S/f of 3 pin 5amp ceilling rose on the existing junction box/wooden block including connection etc. as required .
Installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.
S/F of brass battery angle holder including connection etc. as respect.
Providing and fixing circular/Hexagonal cast iron or M.S sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. clamp shall be made of 12mm dia M.S bar bent to shape as per standard drawing.
Supply of 300 mm exhaust fan model Ventil Air-DB (Havells make) complete with all accessories.
S/F of exhaust shutter suitable for 12" or 300mm exhaust fan.
S/L of 6 sqmm 2 core size aluminum conductor PVC insulated armoured served sheathed cables 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall ve fixed on M.S clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
S/F of water tight oblong 10 watt LED bulkhead luminaire with driver set confirming to IP 65 and above protection. Complete in all respect. CAT-AA
S/F of LED Tube light with batten suitable for upto to 1 x 22 watt LED tube light fitting including with drive set complete in all respect. CAT-AAA
S/F of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.
Supply of 15 KVA/12 KW, 415 Volts Silent DG set comprising of KIRLISKAR make engine model HA394TCIGI developing 32 BHP coupled to 15KVA/ 12KW, KIRLOSKAR Green alternator mounted on common base frame, complete with STD control panel fuel tank, battery & leads, silencer- Residential, AVM Pads, First Fill of Lube Oil, Acoustic Enclosure including freight from factory to to site, loading, unloadng, testing & commissioning of DG set.
S/L of 16 sqmm 4 core size aluminum conductor PVC insulated armoured served sheathed cables 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall ve fixed on M.S clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. – (501-i)
S/F of 16 sq.mm 4 size brass nickel plated compression gland for PVC insulated & armored served sheathed, underground cable including rubber ring etc. complete in all respect. The armoring of the cable shall be properly connected with the earth as per direction of Engineer Incharge.- (503-i)
S/F of plain or pin type 16 Sq.mm. copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer Incharge .(504 -d)
S/F of 100 A 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. -346
S/F of 100 Amp. Four pole change over switch on 50mm x50mm x 6mm angle iron frame, including the cost of labour, T&P painting and other material required for proper completion of the work as per direction and satisfaction of engineer in charge. - 378
S/F of 125 Amp. 4 pole MCCB (25 KA) Thermal magenet release – 1021 (D) CAT- A
S/F of fire extinguisher, ABC type 6.00 kg. capacity (ISI marked IS: 15683 & TAC approved) complete with initial charge and wall bracket along with cupply of all materials and labour for proper completion of work. -1131 (A)
S/F of CO2 type fire extinguisher 4.5 kg. capacity (ISI marked IS: 2878 & TAC approved) complete with initial charge and wall bracket along with cupply of all materials and labour for proper completion of work.- 1132
S/F of fire bucket around bottom made of G.I sheet 9-11 litres capacity duly painted as per fire brigade desgn, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer in charge. 1133
S/F of shock treatment chart (prescribed under I.E rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work. 1134
S/L of 1800 mm. X 900 mm. 12 mm thick chequered rubber matting of tested quality. 1136
Design, Engineering, Supply,Construction, Packing & Forwarding,Transportation, Unloading, Storage,Installation and Commissioning of 15kWp Roof-top Off-Grid Solar Power Project & Maintenance for 1 Year from the date of Installation & Commissioning.
S.I.T.C of Round fruit grader capacity 500 kg/hr. (4 HP) with packing line Complete in all respects including freight & installation charges.
S.I.T.C of Weighing scale (0-100 kg) - 2 nos. Hand operated stiching machine (0.5 HP) - 2 nos. Foot operated peddle sealer - 2 no. Complete in all respects.
S.I.T.C of Inspection conveyor of length & breadth of 4*1meters (1 HP) Complete in all respects including freight & installation charges.
SAINKO SYSTEMS
MITTAL MACHINES PVT LTD
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .