16/2026-27

Providing wood work in frames of doors, window , clerestory, window and other frames wroght, frames and fixed in position including carriage of material in all leads and lifts. (a) lvory cost teak wood.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face vaneers on both faces of shutters including carriage of material in all leads & lifts. 35 mm thick including ISI marked stainless steel but hinges with necessary screws.

Providing and fixing wire gauge shutters using galvanized M.S wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory window with hinges and necessary screws: including carriage of material in all leads and lifts 35mm thick shutters with ISI marked M.S pressed but hinges bright finished of required size second class teak wod.

Providing and fixing glass panes, with wooden fillets wherever necessary including carriage of material in all leads and lifts. Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including carriage of material in leads and lifts. (110mm nominal Size)

Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised PVC rain water pipes by mean of 50x50x50mm hard wood plugs, screwed with M.S screws of required length , including cutting bricks work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand ) and making good the wall etc.complete including carriage of material in all leads and lifts. (110mm)

Providing and fixing plain bend of required degree including carriage of material in all leads and lifts. Sand cast iron S&S as per IS : 3989 (110 mm nominal size)

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete including carriage of material in all leads and lifts. (110 mm nominal size)

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete including carriage of material in all leads and lifts. (110 mm nominal size)

Providing and fixing collar including carriage of material in all leads and lifts. (110 mm nominal size)