Provn of certain sanction work at Phase I of various units at Tezpur area under GE S Tezpur

Amount

S&F Powder coated aluminium frame of any colour to match the colour of glass (minimum 50 micron) as in frame work to revcive glazing glass for opening , doors, windows, ventilators including screws,fastener, rebates including joining cleats to fixed the frame into opening all shall be fixing details and instruction etc. complete all as specified and as directed.

S&F Powder coated aluminium (minimum 50 micron) door shutter of any colour, section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door , hinges ,anodised aluminium snap beading, screws etc.complete all as specified and as directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws as per architectural drawings complete all as specified and as directed.

S&F in repairs floor door stopper aluminium alloy body overall length 140 mm and tonge , anodised with hard drwan steel spring complete all as specified and as directed.

S&F Figured Glass 4.0mm thick, Pin Head / frosted type and glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.

Dismantling Plain or Corrugated Steel Sheeting any gauge, thickness, including nainital or similar roof coverings/sunshade, complete all as specified and as directed.

S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall /sunshade etc, fixed with self tapping screws complete all as specified and as directed. Note :- Existing Galvalume sheet shall be reused, obtain from dismantling item here-in-before.

Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.55mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 3mm dia single GI adjustable suspendor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel truss any type of truss complete all as specified and as directed.

S&F, 110mm bore PVC (SWR) rain water pipe single socketed with rubber ring joints fixed to walls or roof sheet with necessary clamping etc complete all as specified and directed.

S&F Steel work in tubular truss of different size bend to shape, cut to length etc, including necessary welding,special shape washer, conforming to IS:1161-1998 grade St-240 complete as directed by Engineer in Charge.

Mild Steel plates, plain or chequered, 5mm thick or over in thickness in available sizes for base plates and cleats Fe 410-W (Gde-E 250) qua lity-A complete all as specified and directed by Engineer-in-charge.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed.

M&L for Vitrified parking tiles of any colour/patern 40cm x 40 cm x 7 to 10 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments in floors and over 15 mm thick screed bed in CM 1:4 for laying floor finishes complete all as specified and directed by Engineer-in-charge.

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7 to 8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm screed bed in Cement mortar (1:3 complete all as specified and directed.

S&F Coloured Glazed ceramic tiles 6 to 7mm thick, in skirting /dado etc (square/ rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm,set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm rendering in Cement mortar 1:4. complete all as specified and directed by Engineer-in-charge.

M&L Vitrified Ceramic tiles 08-10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-charge.

M&L Vitrified Ceramic tiles 08-10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in skirting /dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-charge.

M&L 100 mm thick,Cement concrete, type D-2, (1:4:8), 40 mm graded aggregate as in sub base even and rough to receive topping layer complete all as specified and directed by Engineer-in-charge.

M&L for providing Plain Cement Concrete (1:2:4) type B0 using 12.5mm graded aggregate as in copings,levelling course in lintels, cills, plinth courses, string courses,lacing courses, parapets water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer-in-charge.

M&L Plain Cement Concrete (1:4:8) Type D-2 using 40mm graded stone aggregate) as in foundation/mass concrete complete all as specified and directed by Engineer-in-charge.

M&L Preparing new Steel or Iron Surfaces of any description, exe 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide, Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

Refixing only steel truss,rafter and purlins of different size bend to shape, cut to length etc, including dismantling and necessary welding,special shape washer, complete all as specified and directed by Engineer-in-charge.

Dismantling of Stone slabs and tiles of any description or thickness in floors Laid, dry and pointed, aprons etc.complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and directed by Engineer-in-charge.

M&L Hardcore of gauge not exc. 63 mm, broken stone aggregate deposited, spread andlevelled in layers n exc. 15 Cm thick, watered and rammed to a True Surface, complete all as specified and as directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm complete all as specified and as directed.

Labour only Brick Work using old bricks obtained from demolition, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair complete all as specified and as directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L Applying one coat of Acrylic Emulsion distember to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed.

S&F in repairs aluminum mortice lock verticle type 75 mm 4/6 levers complete all as specified and directed.

S & F In repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection & footpath etc and finishing surfaces of concrete even and smooth including filling construction joint at interval of 3.00 mtr and at every corner and shall be filled with bituminous sand filler of ratio 1:3. complete all as specified and directed.

S&F Aluminium (extruded section body type )door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight and weight betwwen 61 to 80 kg ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

M&L for two coats of weather coat paint of any approved shade over a coat of Primer (as per Manufacturer’s instructions), including preparation of old surface by filling craks with crack filler to receive weather coat for multistoried up to Three storied bldg incl all necessary scaffolding and safety measures complete all as specified and directed.

M&L for two coats of weather coat paint of any approved shade over a coat of damp proof coat of approved make over a coat of putty (exterior grade) after complete removal of existing treatment for multistoried up to Three storied bldg incl all necessary scaffolding and safety measures complete all as specified and directed.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water for building height up to 12 mtr incl all required sound scaffolding and arrengements to meet safty measurers complete all as specified and directed.

M&L Rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC as specified and finished even and smooth without using extra cement complete all as specified and directed. Note : WPC will be measured and paid for separately

M&L Preparing new plastered surfaces of Walls and applying Two Coats of Exterior Emulsion anti fungus Paint over a coat of damp shield Primer (as per Manufacturer’s instructions), and applied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

"Supply only" liquid water proofing compound (ISI marked) complete all as specified and directed.

M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint (including GI sheets in 3 storey bldgs) for multistoried bldg incl all necessary scaffolding and safty measurers complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

M&L Formwork to sides of Pillars, Posts, Struts, Piers, Columns and stanchions, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L Reinforced Cement Concrete Type B1 (1:2:4) (20mm graded crushed stone aggregate) in Columns, Pillars, Piers, Posts and Struts, etc. complete all as specified and as directed. NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items.

M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

M&L TMT Bars 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, as in stirrups spacers and binders complete all as specified and as directed.

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

Dismantling Structural steel work includings door, gates, etc and similar works complete all as specified and directed.

S&F (in repairs)Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and staining and fixing to any type of standard rails strain -ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc d (each line wire to be measured.) complete all as specified and directed.

M&L for repairing broken edges of chajja's, roof projection, Fascias etc . In small widths/depths ( exposed area not exc 0.16 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , over GI wire mesh, giving a coat of anti corrosive paint to exposed Reinforcement and using coat of anti corrosive paint to exposed Reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisitng surfaces incl removing debris , necessary scaffolding , etc complete all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately)

M/L PCC 1:3:6 type B1 using 20mm grade aggregate as in coping, leveling course or similar work complete all as specified and directed.

M&L18-19mm Block board, grade 1 quality, exterior grade, commercial type (Termite treated / water proof) as in cupboard, drawer, kitchen cabinet etc.) complete all as specified and directed.

M&L for Decorative 0.9mm laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive (water resistance) as per manufacturer's instructions complete all as specified and directed. Rate inclusive for pvc taping along edges of block board

M & L for 1mm pvc decorative type laminate of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F Stainless steel zero crank hinges (auto) fancy typewith Mounting Plates & Cover Caps fixed to shutters in cupboards of standard size and shape for modular kitchen complete all as specified and directed. Make:Hettich or equivalent.

S&F 500 mm deep Black Finish Drawer Channel incl of rooler for moving drawer ,precision full extension runner with pull-out stop and roll-out guard,Powder-coated steel, Black all as specified. Make:Hettich or equivalent.

S&F Brass handles, cast type,polished bright fancy type,handles fixed with screw,of 125mm size complete all as specified and directed.

M&L for Concealed point wiring for one Light/ Fan/ Bell point complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, with and including modular metal flush box and Modular white Cover Plate with Frame for fixing modular switches, sockets fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be done through proper size of copper/brass thimbles complete all as specified and as directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price.

All as per item No. 65.00 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed.

All as per item No. 65.00 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and as directed.

All as per item No. 65.00 here - in - before but for 5 Amps socket point on the same board controlled by one switch.

S&F Modular switch flush type, 6 Amp, one way ,1 module complete all as specified and as directed.

S&F Modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and as directed.

S&F Modular switch, 16 Amp flush type 1 module complete all as specified and as directed.

S&F Modular socket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and as directed.

S&F Modular Fan Regulator stepped type 2 module ,120W complete all as specified and as directed.

S&F Ceiling rose, surface bakelite, 65 x 50 mm,three terminals complete all as specified and directed.

Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten polycarbonate housing and integrated electronic driver with high efficient LEDs 18 Watt with accessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and including connection complete all as specified and directed.

Supply and fix LED tube light fitting of 9 W with tube (2 Ft) 240 V Wall mounted LED batten polycarbonate housing and integrated electronic driver with high efficient LEDs 18 Watt with accessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and including connection complete all as specified and directed.

Supply and fix for Recessed mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt LED CDL light, complete all as specified and directed.

M&L for sub main wiring with Four run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and two run of copper earth wire 4 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified and directed. Note:- Two runs of 4 Sqmm conductor as main wire and one run of 4 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.

S&F Sheet metal double door enclosure for DB's when MCBs to be used 12 way single pole and neutral double door with 200 amps rated bus bar complete including connection complete all as specified and as directed.

S & F MCB 'C' series Single pole and neutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed.

S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work. electrical plate No. 3 of SSR part - I complete all as specified and directed

Supply installation, testing and commissioning of 16 meters height High Mast pole ( Base dia 360 mm approx and Top dia 150 mm approx) having head frame carriage of suitable size complete with having arrangement for fixing 8 LED flood lights fittings , auto timer feeder panel , foundation consisting of mast shaft in two sections, hot dip galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 - 1987 part III. There shall be only one longitudinal seam weld per section and no circumferential weld permissible. it shall also include accessories for high mast including head frame, 3-point suspension system with stainless steel wire rope 6 mm dia 316 grade SS hoisting rope (7/19 construction) double drum winch, Galvanised head frame carriage arrangement suitable for up to 8 luminairs & its control gear boxes, symmetrical lighting arrangement. The Mast shall have the integral power tool for raising & lowering at the base compartment for its operation including design and construction of suitable RCC shallow foundation (recommended by manufacturer technical data sheet) with M20 grade concrete, considering the safe soil bearing capacity as 10MT/SQM at a minimum depth of 2.00 meter below the ground, grouting the foundation bolts manufactured from special steel alloy with nuts, washers, anchor plates, suitable sized HDPE pipe & templates , plug and socket and wiring of luminairs with all wiring materials i.e. with trailing cable ( each per mast light 5 , 2.5 sqmm) from control panel, control gear box etc.and rate of loading/unloading of material/shifting of material as required at site deemed to be included in the rates quoted , complete all as manufacturer technical data Sheet. Mast and Luminary (Flood Light and Aviation Light ) should be from same manufacturer directed by Engineer - In- Charge. Make : Surya / Phillips/ Bajaj

S&F LED flood light fittings of 300 Watts LED with Aluminium die cast housing material , polycarbonate optical material , surge protection device , IP 66 protection , input voltage 140 - 270 volt AC , mounting arrangement as required at site etc complete all as specified and as directed.

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 3.5 core complete all as specified and directed. Note: 1. Excavation and earth work will be measured and paid seperately.

Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed.

M&L for 80 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment.

Supply and laying in trenches Bricks, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge.

Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick complete all as specified and directed by Engr-in-Charge.

Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed by Engr-in-Charge.

AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3309453)

tun baruah (BID ID -3315178)