REPAIR MAINT OF JOINERY PLUMBING AND CERTAIN OTHER MISCELLANEOUS WORK IN POCKET 7 AND 8 IN AGE B R III UNDER GE ROORKEE

Amount

Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter not exc 1.5 Sqm each complete all as specified and directed.

S&F IInd class hard wood (sal) plain.solid straight chowkhat and frames, wrought, framed, rebated on the solid, rounded or chamfered but together with glue, pinned at joints complete all as specified and directed.

S&F M.S work as in holdfasts., wind ties , plane angle cleats for securing purlins to wooden trusses or rafters etc complete all as specified and directed.

Cutting holes in brick walls exc half brick wall but n exc one brick wall built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts and making good dismantled portion in CM ( 1:3 ) or cement concrete (1:2:4) type B1 as required complete all as specified and directed.

M & L cement concrete type BO 1:2:4 (12.5 mm graded agg ) as in bed block , coping & filling to PS Frame etc complete all as specified.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick IInd class hard wood glazed skelton shutters open rebated and prepared to receive glass,guage etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat complete all as specified and directed.

S&F solid PVC door frame of the size 50mm width , 47 mm height with a wall thickness of 5mm(+0.25) made out of extruded 5mmmade out of 5mm PVC sheet reinforced with MS square tube as per specification drying as per manufacture instructions including all necessary fitting complete all as specified and directed.

S&F 30mm thick factory made solid panel PVC door shutters made out of MS tubes of top and bottom rail MS frame shall be covered with heat moulded PVC "C" channel 5mm thick and having width of 50mm for from stiles and H section of 100mm wide for the rails, the inner panel 6mm thick PVC sheet insulated between frame and panel should be struck to the stiles and rails 50x30x5 mm, channel rails 100x30x5 mm H junction. The size, design and pattern of the paneled shutter shall be proceed by GE / Eng-in-Charge and all as per drawing / manufacture instructions complete all as specified including locking device and all necessary fitting etc here and after complete all as specified and directed.

S&F anodised powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engineer in Charge.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer in Charge.

S&F Anodised aluminium grill or guard bars fixed to aluminium window, weight not less than 2.82 kg/Sqm complete all as specified incl powder coating with powder coated colour as approved by GE complete all as specified and directed by Engineer -in- Charge.

S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty complete all as specified and as directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty complete all as specified and as directed by Engineer in Charge.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.

S&F Door closer hydraulically aluminum (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S & F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed.

S&F 150mm ordinary helical door spring incl. roller and roller plate complete all as specified and directed. "make : Ritz."

S&F butt hinges 125mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F butt hinges 100mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified.

S&F 100mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 100 mm of extruded section and fixed.

S&F 250mm long alumn. alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section all as specified

S & F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S & F Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hung shutter incl hinges, steel peg stay complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes , framed guard bars, barred iron doors , ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S&F vitrified ceramic tiles 10mm thick (square/ rectangular) polished, light shade, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F vitrified ceramic tiles 10mm thick (square/ rectangular) polished, light shade, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in as in vertical surface like dado/ skirting etc including 15mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid joint free coloured ceramic tiles 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

S&F 18 mm thick Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the Engineer - in -charge. Make: Rajshri or equivalent

S & F in repairs 18 mm thick Celuka ply of grade 1 quality of one side prelaminated and other side plain white colour to make kitchen cabinet/ drawer shutters complete as per specifications and as directed by the engineer - in - charge.Make_Rajshri or equivalent

S & F in repairs 12 mm thick Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by the engineer - in -charge. Make Rajshri or equivalent.

S & F in repairs 6 mm thick Celuka ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet back covering and pull out drawer base complete as per specifications and as directed by the engineer - in -charge. Make Rajshri or equivalent.

S & F auto closing hinges 35 mm of 0 crank OR 8 crank openable at 110 degree for kitchen cabinet shutters, make KAFF or equivalent

S & F Ball bearing runners 45 mm Telescopic , full extension load capacity 50 kgs, make KAFF or equivalent complete all as specified and directed.

S & F stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified and directed.

S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795 x 500 x 150 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (Thali basket) pull out type, size 530 x 500 x 200 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 x 200 mm with necessary sliding frame structure, fixing clips etccomplete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (storage basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F granite( of any type) stone slab of 20mm thick laid over 15mm thick cement screed bed in CM1:6 machine cut,size and jointed over grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.

Taking down cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks , straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed

M&L for brick work with old size sub class 'B' bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

M&L for rendering 15mm thick in CM 1:6 on brick walls finished over and fair without using extra cement complete all as specified and directed

Demolition of concrete/tiles/kota etc in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed

M&L75 mm thick cement concrete 1:3:6 type C-2 (40mm graded aggrete) as in plinth protection/path finish even and smooth without using extra cement complete all as specified and directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) white with plastic seat cover (excluding fixing of bolt of flushing cistern and flush pipe) including all fitting complete all as specified and directed.

S&F in repair 10 ltrs capacity low level PVC flushing cistern (ISI mark ), valveless, symphonic type, white,with inlet,ball float and handle including brackets complete and all as specified and directed.

S&F in repairs vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified.(Make : Hindware/Cera- Ist quality).

S&F15mm bore PVC connection 450mm long complete and all as specified and directed

S&F in repairs CI floor trap 100mm dia with CP grating including jointing to waste pipe complete all as directed.

S&F in repairs health faucet with (1.5 Mtr tube & hooks ) complete all as specified. (Make : Prayag Cat No.455)

S & F in repair wall mixer Telephonic with crutch (Provision for hand shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete (Make : Prayag cat No.7911-F )

S&F in repairs CP brass shower rose 150mm size shower with 300mm arm suitable for 15mm bore pipe complete all as specified. (Make : Prayag cat No. BS-79S)

S&F in repairs chromium plated cast copper alloy 2-way angle cock with flange suitable for 15mm bore pipe, complete all as specified(Make : Prayag cat No.7911-F )

S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified.(Make : Prayag Cat No. 7906-F)

S & F in repair wall mixer with 'L' bend (Provision for OH shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete (Make : Prayag cat No.7911-F )

S & F in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed. (Make : Prayag Cat No. 7950).

S&F in repairs towel rail 600mm long 20mm dia aluminium anodised fixed with wooden gitties or embedded in cement mortar (1 : 3) with steel screws etc, complete all as specified.

S&F in repair 15 MM bore concealed stop valves long shank and cup cast copper allow chromium plated fancy type screwed down high pressure, with capstan handle long shank screwed both ends all as specified.

S&F in repairs Toilet paper holder of chromium plated fixed to walls with chromium plated brass screws complete all as specified and directed.

S&F in repair Curtain rod Aluminium coloured powder coated fancy type curtain rod 20 to 25mm dia complete all as specified and directed .

S&F of Brackets suitable for fancy type curtain rod ( Make - Flywell ) complete all as specified and directed .

S&F of pvc fancy nobe for curtain rode suitable to fix to curtai rode.( Make - Flywell ) complete all as specified and directed .

S&F Kitchen sinks with drain board made of stainless steel 1 mm thick with plugs washers & wastes including bedding in cement mortar to dwarf wall or incl. fixing cantilever brackets & connected to pipe , size overall 915 x 460 mm& bowl size 410 x 330mm complete and all as specified and directed.

S&F Cabinet Mirror (400mm x 500mm) complete all as specified. (Make : Prayag Cat No.554)

M & L GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, incl cutting chasing in wall for concealing of pipe if required and including taking down complete all as specified complete all as specified and directed. Make : TATA / JINDAL / SWASTIK / PRAKASH.

M & L GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified incl taking down complete all as specified and directed. Make : TATA / JINDAL / SWASTIK / PRAKASH.

Fixing only GI water tubing of bore 20 mm with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and directed

Fixing only GI water tubing of bore 15 mm with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and directed

Cutting chases, pinning in beick wall , making good to facing where required and pointing in CM 1:3 to ends or edges of slabs and making good cutting exc. 10 cm but n.exc 20 cm girth. Etc complete all as specified and directed

Demolition of RCC of any description and in any position not otherwise specifically Provided for ( Reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M & L for RCC in 1:2:4 type B-1 using 20mm graded stone aggregate as in slab supported on walls and column in floor, roof landing, balconies, canopies deck slab and in shelves and man hole covers and the like including all necessary form work complete all as specified and directed.

M & L mild steel TMT bars,10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips quality conforming to Grade-I IS-432 (Part -I), complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and directed.

M&L for preparation of new surfaces of wood of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for complete removal of old existing treatment on walls, cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds, moss and efflorescence salt and trading oil decorated surface of walls and applying a coat of wall care putty of approved make as on wall surface and two coats of oil based distemper (white or tinted) complete all as specified. Make (Asian/Berger/Neorolac)

M& L for two coat white wash on ceiling afetr Complete removal of existing treatment complete and all as specified and directed.

M & L for 18 to 19 mm thick particle board medium density flat pressed single layer type or three layer type with BWR type adhesive fixed with screw to timber frame work complete all as specified and directed.

M&L IInd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with screw, sectional area exc 6 sqcm but n exc 13 sqcm , complete all as specified and directed.

S&F 125mm long hasp and staple aluminium anodised including bolt to hinge plate and fixed screw complete all as specified and directed.

sweety pest control

M/S. DEV ASSPOCIATES

sagar associates

shreyansh construction

Nanda Brothers

VINAYAK CONSTRUCTION COMPANY

Alankar Traders

M/S A.K GARG

VERDHMAN ASSOCIATES