SPECIAL REPAIRS TO BLDG NO P 111 04 QTRS AND P 112 04 QTRS OF OTHER RANKS MARRIED ACCN AT BOWENPALLY PROVN OF VITRIFIED TILES IN SECOND FLOOR CORRIDOR ADDN/ALTN TO OFFICERS TOILET OF BLDG NO P 509 SP BLOCK P 511 LIBRARY BUILDING AT CDM PROVN OF 02 X

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including floor finishes complete all as specified and as directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as below floor finish complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., including cement screed in CM 1:6, 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed

M&L for granite slab flooring 20 to 25 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over 20 mm thick screed bed in CM 1:6 including making hole in platform for gas pipe complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar situations complete all as specified and as directed.

Demolition of cement concrete in floors and pavings n.exc15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded aggregate) as in sub base of floor complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in any position and of any description not otherwise specifically provided for sunken floors complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:3 on concrete surface or brick surface to sunken floor with using 3% WPC as per manufacturer's instruction complete all as specified and as directed. Note: WPC will be measured and paid separately.

M&L for 2 coats of bitumen grade 85/25 applied hot to concrete surface at the rate of 1.5 Kg per Sqm per coat complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thickness reinforced with polyster non woven fabric (wt not less than 150 gms/ sqm) land on primed surface by forced application complete all as specified and as directed.

M&L for Cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) 50mm thick in sunken floor of toilet/bathroom finished even and smooth with out extra cement complete all as specified and as directed.

M&L for PCC type E2 1:5:10 (using 40mm graded stone aggregate) in sunken floor of toilet/ bathroom finished fair and even complete all as specified and as directed.

M&L for provide 50 mm dia UPVC pipe of pressure rate 10kgf/cm2 as water spout in sunken floor complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc., complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 10mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces on wall applying two coats of oil bound distemper over a coat of primer including 3mm thick in two coats wall care putty complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceilings, and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on wall surfaces complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.5 Sqm each including steel window, ventilators etc., and making good to hold fast holes with PCC Type C1 1:3:6 complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm but not exceeding 4 Sqm each including steel window, ventilators etc., and making good to hold fast holes with PCC type C1 1:3:6 complete all as specified and as directed.

Taking down shutters of any description exc 1.00 Sqm and n exc 2 Sqm each complete all as specified and as directed.

M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

S&F Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Paneling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified and as directed.

S&F 150mm size aluminium anodised handles, fabricated type complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

M&L for Mild steel frame work such as grills, framed guard bars etc., with ends of bars shouldered and/or riveted, or forged into spikes and similar work conforming to IS Fe 290-0 Gde E-165 complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description over 10 cm width and girth complete all as specified and as directed.

Supply and fix Pressed steel door frame of size 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and as directed.

All as per Serial Item No. 37 above but of size 125 X 60 mm complete all as specified and as directed.

Material and Labour for PCC 1:2:4 Type B0 ( using 12.5 mm graded stone aggregate ) as in filling in pressed steel door frame complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in block for fixing of hold fast, window cill and similar items including necessary formwork complete all as specified and as directed.

M&L for factory made 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003(Part-I), kiln seasoned and chemically pressure treated , 35 mm thick complete all as specified and as directed.

S&F glazed and skelton shutters divided into squares with plain, chamfered or rounded, mitred and rebated sash bars prepared to receive glass, gauge sizes of members of shutters as specified in SSR Pt-I, section 8 , clause 8.24 (A) 35mm thick second class hard wood complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel complete all as specified and as directed.

S&F in repairs double action spring hinges mild steel with steel wire spring, stove enameled black 100 mm long complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F mild steel flat iron as in hold fast complete all as specified and as directed.

Cutting holes in brick wall built in cement mortar depth of embedded portion of holdfast exceeding half brick but not exceeding one brick and making good disturbed portion in cement mortar 1:3 complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) length 300mm fixed complete all as specified

S&F 200mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of wooden surfaces exceeding 10cm girth or width complete all as specified and as directed.

M&L for prelaminated particle board of 18/19 mm thick exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work of cupboards, book case etc., complete all as specified and as directed.

S&F hasp & staple 100 mm size aluminium anodised fixed with screws complete all as specified and as directed.

S&F in repair continuous (piano) hinges 30 mm width of flap, brass, bright finish or electrogalvanised complete all as specified and as directed.

S&F in repair 20mm dia CP Decorative type drapery curtain rods with brackets of approved quality complete all as specified and as directed.

S&F in repair Vitreous china Orissa pan squatting pattern 580 X 440mm with integral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacity complete all as specified and as directed.

Supply & fixing in repair vitreous china wash basin with pedestal, white flat size 550x400mm including bracket cutting for and pining in ends of brackets or erecting stand including PVC connection pipe 15 mm bore 450 mm long, waste coupling of PTMT, PVC waste pipe complete all as specified and as directed.

S&F 15 mm dia 45 cm long PVC water connection with PTMT nuts and washers complete all as specified and as directed.

S&F in repairs CP Soap dish fixed with chromium plated brass screws of size 160x160x90mm complete all as specified and as directed.

S&F in repairs 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs stop cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe chromium plated 15 mm dia complete all as specified and as directed.

S&F in repairs concealed stop cock fancy type 15mm dia, chromium plated with long shank and cup (concealed type) complete all as specified and as directed.

S & F in repairs 15mm bore dia, pillar taps (fancy type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and as directed.

S & F in repairs tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated complete all as specified and as directed.

S&F in repairs stainless steel grating of 125 mm dia chromium plated grating for nahani traps with or without hole for waste pipe complete all as specified and as directed.

S&F HDPE pipes of pressure rating 6kgf/sqcm of 40 mm dia fixed/concealed on walls or floors complete all as specified and as directed.

S&F GI tubing medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes complete all as specified and as directed.

S&F GI tubing medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes complete all as specified and as directed.

S&F GI tubing 25mm bore medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old steel tubing complete all as specified and as directed.

S&L in repairs CI floor trap with grating including jointing to waste pipe with dia of outlet 75mm complete all as specified and as directed.

Demolition and breaking up drain AC pipes/PVC pipes/CI Pipes set in cement mortar of any dia and size complete all as specified and as directed.

S&F UPVC pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm complete all as specified and as directed.

S&F UPVC(SWR) bends 110 mm complete all as specified and as directed.

S&F UPVC pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm complete all as specified and as directed.

S&F UPVC(SWR) bends 75 mm complete all as specified and as directed.

S&F UPVC(SWR) branch pieces single (equal or unequal) (size or socket type or with parallel branches with access door bore of the pipe 110 mm ) complete all as specified and as directed.

S&F UPVC(SWR) branch pieces double (equal or unequal) (size or socket type or with parallel branches with access door bore of the pipe 110 mm ) complete all as specified and as directed.

S&F UPVC(SWR) branch pieces single (equal or unequal) (size or socket type or with parallel branches with access door bore of the pipe 75 mm ) complete all as specified and as directed.

Supply and fix in repairs 110 mm bore UPVC (SWR) junction single ( single 'T') equal or unequal complete all as specified and as directed.

Supply and fix in repairs 110 mm bore UPVC (SWR) Vent Cowl complete all as specified and as directed.

S&F in repairs stainless steel sinks made out of 1.00 mm thick sheet for kitchen with plug and washers, waste pipe with cantilever brackets over all size 495 X 420mm bowl size 410mm X 330mm X160mm complete all as specified and as directed.

S&F in repairs Stainless steel plate rack of size 31" X 36" X 10 " complete all as specified and as directed.

Demolition of existing cement water tanks (reinforced) on roofs complete all as specified and as directed.

S&F of rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair 20 mm Ball brass valves. high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc., complete all as specified and as directed.

Material and labour for brick work with fly ash bricks, old size, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed .

Use and waste of formwork to sides & soffits of RCC shelves for rough finished concrete surfaces complete all as specified and as directed.

Material and labour for providing reinforced cement concrete (1:2:4 ) type B1 (using 20 mm graded stone aggregate) as in slabs supported on wall complete all as specified and as directed.

Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortar 1:3 cutting not exceeding 10cm girth complete all as specified and as directed.

S&F in repairs toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

Cutting existing steel tubing for alterations or additions (Each cut measured) 15 mm pipe complete all as specified and as directed.

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) 15 mm pipe complete all as specified and as directed.

S&F in repair vitreous china counter top WHB white size 560x455mm or required size as approved complete all as specified and as directed. Make: JAQUAR or equivalent in hind ware/ Parryware/CERA as approved by GE.

S&F in repairs 15mm size pillar tap fancy type long shank chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make: JAQUAR or equivalent in Hindware/ Parryware/CERA as approved.

S&F in repairs CP waste coupling 32mm dia complete all as specified & directed.

S&F CP health faucet with 1.2 mtr tube and hook complete all as specified and as directed. Make: JAQUAR or equivalent in Hindware/ Parryware/CERA as approved.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm & PVC LDPE waste pipe 32mm dia 1m length complete all as specified and as directed.

S&F in repairs 15mm size two way bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall complete all as specified and as directed.

S&F in repairs Stop/angle valves fancy type 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Make: JAQUAR or equivalent in hind ware/ Parryware/CERA as approved.

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing fixed in repairs complete all as specified and as directed.

S&F Aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Taking out existing water closet, pedestal pattern and replacing with new EWC (Pedestal Pattern) cascade type with flush tank, seat cover etc white including fixing bolts complete including making good to floor to match with adjoining surfaces complete all as specified and as directed. Make: JAQUAR or equivalent in hind ware/ Parryware/CERA as approved.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F Butt hinges of 125 mm size, Medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F UPVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for preparation of old wall surfaces and applying one coat of distemper oil emulsion complete all as specified and as directed.

S&F for Brass CP bottle traps 32mm bore for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap complete all as specified and as directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, as WHB counter top bedded over brick pillar and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L for Precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings for WHB , cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.

M&L for vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for vitrified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 1.00 sqm, in skirting/dadda etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick plaster in cement mortar 1:4 complete all as specified and as directed.

M&L for vitrified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed.

Urinal partitions with toughened frosted glass slabs terminating about 40cm above floor line, fixed in repairs complete all as specified and directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for PVC decorative false ceiling of high quality 5-6mm thick of any colour and any texture including PVC profiles of angles, mouldings, clad seal strips etc., complete connected to each other on a groove ridge, nail down horizontally/vertically and at any angle. PVC panels shall be of three dimensional plate with a longitudinal cellular internal structure width of panel is of 250mm and length 2000-3000mm. PVC panels shall be resistant to environmental factors such as high and low temperature, impact, durability, flexibility, etc., PVC panels shall be fixed directly on flat wall with non corrosive nails/screws or non corrosive staples 14mm/silicon sealant/special glue for fixing PVC panels etc., complete all as per manufacturer's instructions and complete all as specified and as directed. Make: Creative Stylla, PVC panels, Keiyona PVC Industry, Deeksha PVC Panels or equivalent as approved by GE.

S&F 52mm thick PVC Partition consisting of 12mm thick plain solid PVC ply sheet reinforced with frame work made from 40mm x 20mm MS tubes. In between two MS tubes, 5mm thick Plain heat moulded 'C channel of size 75mmx50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply panel shall be inserted in the PVC 'C channel. The first & last MS tube should be erected such that it is inside a PVC 'C channel, in between adjoining plastic panel, 5mm thick x75mmwidth plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cement complete all as specified and as directed.

S&F 8mm thick PVC false ceiling of wooden/gray colour fixed to the seamless grade work complete all as specified and directed.

S&F sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x330mm x 160mm complete all as specified and as directed.

M&L for surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and as directed.

M&L for excavation in trenches n.exc 1.5m and n.exc 1.5m in depth for foundation etc n.exc 10 Sqm on plan and n.exc 1.50M in depth and getting out hard/dense soil complete all as specified and as directed.

M & L for cement concrete in foundation filling and mass concrete type D2 1:4:8 (40mm graded aggregate) complete all as specified and as directed.

Returning filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed.

M&L for RCC M-25 design mix beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for RCC M-25 design mix slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and wastage of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Use and wastage of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and as directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat fair finished surfaces complete all as specified and as directed.

M&L for PCC type B1 1:2:4 (using 20mm graded stone aggregate) as in copings, bed plates, kerbs, plinth coarses, leveling coarses etc. complete all as specified and as directed.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for Mild steel TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S & F Non skid coloured ceramic tiles 300x300mmx 7 to 8mm thick (square or rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and painted in white cement to match complete all as specified and as directed.

M&L for Screed bed or bedding layer of cement mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for Hard core of gauge n.exc 63mm of broken stones, deposited, spread and leveled in layer n.exc 15cm thick water and rammed to a true surface complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, leveled and rammed including watering complete all as specified and as directed.

M&L for PCC type D2 1:4:8 (40mm graded aggregate) 100mm thick as in sub base complete all as specified and as directed.

Supply & fixing in repairs PVC (SWR) branch piece, single (single Y or T etc) equal or unequal 75 mm dia with access doors complete all as specified and as directed.

S & F PVC (SWR) gully trap 125/110 mm dia plain with grating including jointing with solvent cement and fixed in PCC (1:2:4) type B1 complete all as specified and as directed.

M&L for reinforced concrete pipes, class NP2 150 mm dia laid and jointed complete with collars complete all as specified and as directed.

M & L for 75mm thick cement concrete type B1 by using 20mm graded aggregate 1:2:4 as in paths etc laid in panels including finished surface smooth and even w/o using extra cement complete all as specified and as directed.

M&L for two coats of cement base paint over a coat of white wash on walls including preparation of New surfaces of walls complete all as specified and as directed.

S&F 15mm dia steel water tubing medium grade galvanized with all fittings & fixed complete to walls & ceilings or laid in floors complete all as specified and as directed.

S & F 20mm dia steel water tubing medium grade galvanized with all fittings & fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F PVC waste pipe for urinal/WHB complete all as specified and as directed.

S&F water closet pedestal pattern of any size and supply & fix vitreous China wash down water closed pan (pedestal Pattern) white including fixing bolts, including making good to floor to match with adjoining surfaces complete all as directed

S & F in PVC low level flushing cistern 10 Lit capacity complete all as specified and as directed.

S&F UPVC ventilators operated both inward and outward with the support of hinges with modernised high quality slashes, hardware fittings etc., complete all as specified and as directed.

S&F Galvanised iron wire cloth 0.56 mm nominal dia of wire cloth and average width of aperture 1.18 mm complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

M&L for vitreous china wash hand basin , white, flat back size 550x 400 mm fixed in repairs including waste coupling, 32mm dia etc., complete all as specified and as directed.

M & L for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required superficial area not exceeding 150 Sqcm complete all as specified and as directed.

S & F 50 mm dia steel water tubing 'medium grade' galvanized, with all fittings & fixed complete to walls & ceilings or laid in floors complete all as specified and as directed.

S & F 1000 litres capacity, rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power /two way/bell etc., on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site after considering against schedule of credit and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M & L for Point wiring with 1.5 Sqmm copper conductor single core PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC conduit surface / concealed and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with suitable modular mounting plates for fixing switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for: (a) One light point controlled by one, one way switch 5 amps, SP

All as per item No. 171 above but, one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.

All as per item No. 171 above but, one Bell point controlled by one bell push switch 5 amps, SP complete all as specified and as directed.

All as per item No. 171 above but, one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.

All as per item No. 171 above but, one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per item No. 171 above but, one light point controlled by two 2 way switch 5 amps, SP complete all as specified and as directed.

All as per item No. 171 above but, using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor complete all as specified and as directed.

S & F switch piano single pole flush type 5 amps, 230 volts complete all as specified and as directed.

S & F switch piano two pole flush type 5 amps, 230 volts complete all as specified and as directed.

S & F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as specified and as directed.

S & F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type with fuse and neon indicator complete all as specified and as directed.

S & F bell push 5 amps single pole flush type complete all as specified and as directed.

S & F electric bell AC 230 volts single pole complete all as specified and as directed.

S & F electronic ceiling fan regulator stepped type heavy duty suitable to work on 230 volts complete all as specified and as directed.

Supply & Fix wall mounted light fitting suitable for 1X15 watt LED Bulb including taking down existing unserviceable light fitting complete with all accessories complete all as specified and as directed. Make: Havells Cat No LHDL07150099 or equivalent in Phillips/ Wipro as approved by GE.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed.

S&F LED Integrated batten T5 Indoor PVC extruded T5 LED Battens of size - 4 FT 20 watt and colour white etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make :Havells Cat Part No LHEXBYPNIN1W020 or HALONIX HLCB-01-1XT or equivalent in Wipro/Philips as approved by GE.

Supply and fix in replacement of unserviceable security light luminaries LED 1x25 watts with deep drawn housing including all accessories and LED lamp 25 watts with suitable 25 mm dia GI bracket 0.60 mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as specified and as directed. MAKE:Havells Cat No LHETAXU7PA6S025 or HALONIX HLSLD-09-25-CWL-R or equivalent in Wipro/Philips as approved by GE.

Supply and fix LED Integrated batten T5 Indoor PVC extruded T5 LED Battens of size - 2 FT 10 watt and colour white etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells Cat Part No LHEXBYPNIN1W010 or equivalent in Wipro/Philips/Halonix as approved by GE.

S&F surface mounted down lighter with die cast aluminium housing with frosted diffuser along with slim type round surface mounting LED luminaries 15 watts complete with necessary fixing arrangements and connecting to all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make: Phillips SM251C LED16S-6500 PSU WH or equivalent in Havells/Wipro as approved by GE.

S & F 10W bulk head luminaire suitable for outdoor with high brightness giving glare free light complete all as specified and as directed. Make: Havells Cat No.HEXAFT10WLED857 SSYMBOPCOPCMP or HALONIX HLBH-02-10-CW or equivalent in Wipro/Philips as approved by GE.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete all as specified and as directed.

S & F MCB SPN 415 volts suitable for fixing in MCB DB of capacity 40 / 60 amps complete all as specified and as directed.

S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and as directed. Make: IndoAsian Cat Part No 811122-29 or equivalent in Standard/Havells as approved by GE.

S & F Vertical type, MCB DB TPN 4 way, double door, with 200 Amps rated bus bar, suitable for and including incoming MCCB TP 415 volts AC 3 phase 50 Hz 10 KA with fixed magnetic setting for current ranging of capacity 63 Amps (MCCB TP conforming to IS 13947 (P-2) IEC:947) made out of CRCA sheet housing with powder coating & conforming to IS 13032, IS 8623, BS 5486 accommodated suitably in a MS enclosure weather proof made out of 3 mm thick MS sheet having hinged and robust locking arrangement including painting by red oxide primer one coat and overall powder coated complete all as specified and as directed.

M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metallic rigid PVC conduit canceled and conduit accessories of medium grade not less than 20 mm dia including one run of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuity conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable sub main wiring complete all as specified and as directed.

Disconnecting and removing ceiling fan of 1200/1400 mm sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc., and writing MES No with black paint and testing complete all as specified and as directed. Note :- 1. PVC 3 Core copper cable multstandrad of size 0.50 Sqmm from ceiling rose to ceiling fan deemed to be included in the rate quoted by the contractor 2. Necessary repairs/replacement of unserviceable parts shall be measured and paid separately.

Supply only the items for ceiling fans of any size and sweep for sealed ball bearing suitable for ceiling fan of any size complete all as specified and as directed.

Supply only gun metal bush suitable for ceiling fans complete all as specified and as directed.

Supply only rubber bushes with MS clamp, bolt, nut and split pins complete all as specified and as directed.

Supply only Fan condenser 2.5 mfd suitable for ceiling fan complete all as specified and as directed.

M&L for painting of Fan and blades as the original color complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I, 2009 complete all as specified and as directed.

M & L for Point wiring on concealed conduit with 1.5 Sq mm FRLS copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through existing conduit and conduit accessories of suitable dia medium grade and modular accessories including fixing/grouting sunken/ surface along with modular flush box of suitable thickness covered with suitable modular cover plate including running up of 1.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc., complete all as specified and as directed for one light/fan/Bell point controlled by one, one way switch 5A, SP NOTE: Rate of Modular Flush box and Cover plate are inclusive of rate quoted by the contractor

All as per serial item No 204 above but one 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per serial item No 204 above but one 3 Pin 5 Amps switch socket Independent board complete all as specified and as directed.

All as per serial item No 204 here-in-before but using 2.5 Sq mm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sq mm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

S & F Modular switch 1 way 10 A, 1 Module capacity 230 volts complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

S & F Modular switch 1 way 16 A, 1 Module capacity 230 volts complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

Supply and fix socket outlet modular type multipurpose 2/3 Pin, 10 amps, 230 volts combined 2 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

Supply and fix socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian

S and F sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and as directed. Make: Havells/Standard/IndoAsian

S & F in replacement LED panel light (round) 15 watts including LED 15 watts lamp complete with all accessories complete all as specified and as directed. Make:Havells Model Trim LED Panel Round Cat Part No LHEBLDP7IN1W015 or equivalent in PHILIPS/WIPRO as approved by GE.

S&F PVC Body Exhaust fan of 250mm sweep of 1350 RPM, Air Delivery 500 CMH single phase 50 HZ AC Supply with louvers and connecting up with and including provision of PVC insulated copper flexible cord from ceiling rose to connection of exhaust fan complete all as specified and as directed. Make: Model Maxima DX 250mm sweep white of Product Code 70049 or equivalent in Havells/Crompton as approved by GE.

S&F lamp holder insulated body surface bakelite with back plate suitable for angle/batten fittings fixed with wooden/PVC round blocks complete all as specified and as directed.

SURA INFRASTRUCTURE

M/s GM Constructions

BEEGEE DESIGN SYSTEMS