Supply and Installation of Plumbing items for the construction of Isolation wards in Kerala -Zone G

PLUMBING ITEMS

Providing and fixing white vitreous china coupled type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing pedestal type wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China pedestal type Wash basin with a 15 mm C.P. brass pillar tap

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Supply,Fixing, Testing and Commissioning Angle valves Make: Kohler or equivalent

Supply,Fixing, testing and commissioning at site C.P. Brass Bib Cocks long noze with wall flange Make: Kohler or equivalent

Providing, Fixing, testing and commissioning at site in position floor Trap, with Stainless Steel grating

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 15 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. External work - Exposed on wall 32 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. External work - Exposed on wall-40 mm nominal outer dia pipes

Providing and fixing uPVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. concealed work, including cutting chases and making good the wall etc. 40 mm pipe SCH-40

Providing and fixing uPVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe

Providing and fixing uPVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step uPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe

Providing and fixing uPVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step uPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe

Providing and fixing Unplasticized Polyvinyl Chloride (uPVC) pipes ASTM D-1785, including all uPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall - 40mm SCH 40

Providing and fixing Unplasticized Polyvinyl Chloride (uPVC) pipes ASTM D-1785, including all uPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Internal work - Exposed on wall - 50mm SCH 40

Providing and fixing uPVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia SCH40 - External work - Exposed on wall

Providing and fixing UPVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step UPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia SCH 40- External work- Exposed on wall

Providing and fixing uPVC pipes, having thermal stability for hot & cold water supply including all uPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 75 mm nominal outer dia pipe

Providing and fixing uPVC pipes, having thermal stability for hot & cold water supply including all uPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 110 mm nominal inner dia pipes

Providing and fixing Control Valve(brass Ball Valve) of approved quality of following size. 40mm dia

Providing and fixing Control Valve(brass Ball Valve) of approved quality of following sizes. 32mm dia

Providing and fixing complete set of white vitreous china laboratory sink with complete accessories C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete,angle valves for the sink, painting of fittings and brackets, cutting and making good the wall wherever required.

Providing and fixing uPVC moulded fittings/accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement - 110 mm dia Vent cowl

Providing and fixing uPVC moulded fittings/accessories for Rigid uPVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee

Providing and fixing uPVC moulded fittings/ accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement-110 mm dia Door Elbow

Providing and fixing uPVC moulded fittings/ accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement- 110 mm dia Bend

Providing and fixing uPVC moulded fittings/ accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement - 110 mm dia Elbow

Providing and fixing uPVC moulded fittings/accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement -110 mm dia End Cap

Providing and fixing uPVC moulded fittings/accessories for Rigid uPVC pipes,including jointing with uPVC solvent cement - 110 mm dia Socket/ coupling

Providing and fixing uPVC moulded fittings/ accessories for Rigid uPVC pipes including jointing with uPVC solvent cement 110 mm dia "Y"

Providing and fixing uPVC moulded fittings/ accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement - 110x75 mm dia Reducer

Providing and fixing uPVC moulded fittings/accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement - 75x75x75 mm dia Door Tee

Providing and fixing uPVC moulded fittings / accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement -75 mm dia Door Elbow

Providing and fixing uPVC moulded fittings/ accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement -75 mm dia "Y"

Providing and fixing uPVC moulded fittings/ accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement -75x75x75 mm dia Tee

Providing and fixing uPVC moulded fittings/accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement - 75 mm dia Elbow

Providing and fixing uPVC moulded fittings/ accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement - 75 mm dia Bend

Providing and fixing uPVC moulded fittings/ accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement - 75 mm dia Socket /coupling

Providing and fixing uPVC moulded fittings/ accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement -75 mm dia End cap

Providing and fixing uPVC moulded fittings/accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement - 75 mm dia FTA

Providing and fixing uPVC moulded fittings/accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement - 75 mm dia MTA

Providing and fixing uPVC moulded fittings/accessories for Rigid uPVC pipes, including jointing with uPVC solvent cement - 75 mm dia Vent Cowl

Providing and fixing CPVC moulded fittings/accessories for Rigid CPVC pipes, including jointing with CPVC solvent cement - 20 mm dia Screwed Tee

Providing and fixing CPVC moulded fittings/accessories for Rigid CPVC pipes, including jointing with CPVC solvent cement - 20 mm dia Screwed elbow

Providing and fixing CPVC moulded fittings/accessories for Rigid CPVC pipes, including jointing with CPVC solvent cement - 20 mm to 15mm dia Reducer

Providing and fixing CPVC moulded fittings/accessories for Rigid CPVC pipes, including jointing with CPVC solvent cement - 32 mm to 20mm dia Reducer

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm diameter

Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion single tee without door. 110x110x110 mm

Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm bend

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing urinal partitions PVC material in the wall with required material as per direction of Engineer-in Charge and finished smooth.

Supply and Fixing of ISI marked Water heater 15LTR Make: V-Guard, Crompton or Equivalent.

Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S (non modular) bricks of class designation 7.5

Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S (non modular) bricks of class designation 7.5

Supplying and installing ready made Polyethylene Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge. 1.Below 120 flush capacity

Supplying and fixing readymade ferrocement soak pit of size 1.8m dia,1.2m depth including cover slab, including all labour material charge etc. complete.

WASTE WATER PIT

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Honey-comb brick work 20/22 cm thick with common burnt clay bricks of class designation 7.5 up to plinth level with cement mortar 1:4 (1 cement : 4 coarse sand).

12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand)

Centering and shuttering including strutting, etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and walls. Under 20 cm wide

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo - Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

Supplying and fixing 500mm dia CI manhole cover with frame( medium duty) charges including all cost, labour charges etc complete.

Supplying, filling, spreading & levelling Brick bats , in recharge pit/waste pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer -in- charges

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit,over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer -in-Charge

Surface dressing of the ground including removing vegetation and in – equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto 1.5m.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Please Enable Macros to View BoQ information