CCTV kary nirman Nagar Palika Bhim

Part B Non BSR Item

Supply installation testing and commisioning of IP 5MP megapixel IR speed dome camera (output) having 1/3" progressive scan CMOS on 25fps (PAL) and 30fps (ntsc), optical zoom not less than 20 X digital zoom not less than 16X minimum pan speed: 0.1-160./s tilt speed: 0.1-120.s true day/night minimum illumination: 0.5 lux (B/W) or better 0 lux with IR on upto 100 meter IR range, camera should support these funtion: 3D DNR auto focus, minimum 24 privacy masking minimum 2 streaming, 3D intelligent positioning alarm trigger on motion detection on audio exeption detection dynamic analysis tempering alarm, network disconnect, IP address conflict storage exception outdoor IP 66 RATED COMPLETE WITH 24V AC power supply brackets and mounting etc, as required. approved makes: SONY/BOSCH/ZONTECH

Supply installation, testing and commissioning of full ip 8MP 1/2.5" Progressive scan CMOS; H.265+/H.265+/H.264+/H.264/MJPEG; color: 0.01 lux @ (F1.2,AGCON), 0 LUX with IR; 20fps (3840x2160), 25fps/30fps (2560x1920,2560x1440,2048x1536,1920x1080); 50 meters or beter IR range, 6/12mm lens optional; 120dB WDR; VCA funtions; streams: 3D DNR; BLC;ICR; EXIR2.0;all metal housing, IP67;; built-in micro SD/SDHC/SDXC slot: PoE and 12V DC/24V AC, able to work in -30-60C temprature, IP66 complete with wall mounting accessories. ONVIF compliant, UL, CE and FCC certification approved makes with 3 Year comprehensive on-site OEM warranty : SONY/BOSCH/Zontech.

Supply Installation testing and commissioning of 8 MP, 1/2.7" CMOS image sensor, low illuminance, high image definition ,Outputs max. 8MP (3840 × 2160) @15 fps, and supports 2688×1520 (2688 × 1520) @25/30 fps ,H.265 codec, high compression rate, ultra-low bit rate ,Built-in IR LED, max IR distance: 60 m ,ROI, SMART H.264+/H.265+, flexible coding, Focal Length 2.7 mm–13.5 mm, applicable to various bandwidth and storage environments ,Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes ,Intelligent detection: Intrusion, tripwire ,Abnormality detection: Motion detection, video tampering, no SD card, SD card full, SD card error, network disconnection, IP conflict, illegal ac- cess, local alarm, voltage detection,audio abnormal ,Alarm: 1 in, 1 out; audio: 1 in, 1 out; 12V DC/PoE power supply ,IP67 protection Product should CE, RoHS, . Make:Zontech

Hard Disk 6 TB, Form factor-3.5" with 3 Year comprehensive on-site OEM warranty.

“Supply, installation, testing and commissioning of 1 kVA True Online Double Conversion UPS, single phase input and output, 230V AC ±1% output, input power factor ≥0.99, output power factor ≥0.8, pure sine wave output, SMF VRLA batteries with minimum 30 minutes backup at full load, LCD display, USB/RS-232 communication, built-in protection features, efficiency ≥90%, IP-20 enclosure, BIS/CE/RoHS compliant, with minimum 2 years onsite comprehensive warranty, complete in all respects.” Certification Make- Microtek/Luminos/Numeric/Schneider/Zebronic or Equivalent

POE Switch 8 Ch. Giga + SFP Full speed 2.5G Ethernet ports for WiFi 6/6E AP, 4K Video, Extra 10G SFP+ for NAS, desktop with 10GbE networking card or uplink connectivity Zontech.

Media Converter Giga 1× 10/100/1000Mbps Auto-Negotiation RJ45 port supporting Auto-MDI/MDIX Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Complies with IEEE 802.3ab and IEEE 802.3z Extends fiber distance up to 20km

Junction Camera box - Junction box is made up of standard quality PVC, it protects connectors from being rusted or oxy-genated. Provide an easy way to mount/install security camera, Dimension: 4 x 4 Inch, Material: PVC Brace Screw Holes: If repeatedly open and close screw, the threads will not get rushed, because it made up of pure brass. Durable and Sturdy box is the base of everything. It is made of ABS plastic and has longer serve time. Suitable for cable boxes, electronic products, communications, medical and health

FIBER PATCH CHORD

Steel clamps

Fiber Junction box + Splicing (as per required)

Supply ,Installation and Testing of Rack mounted 12 Port LIU loaded with pigtail, adaptor, patch cord etc. Make:Molex

SFP double pair- Dual data-rate of 1.25Gbps/1.063Gbps operation 1310nm FP laser and PIN photo detector for 20km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET OC-24-LR-1 Compatible with RoHS +3.3V single power supply Operating temperature: Standard : -5 to +70 degree Industrial : -40 to +85 degree Zontech.

24 10/100/1000Mbps RJ45 PoE+ Ports Switch with 2 SFP Slots. Up to 250 W, making it ideal for small to medium business surveillance systems. Zontech.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Part A RUIDP BSR 2023

Supply and erection of Galvanized Iron pole with galvanizing done in single dipping (Average coating thickness Minimum 65 Microns) continuously tapered poles having Octagonal / Circular cross-sections designed to withstand the maximum wind speed as per IS 875, The pole shaft shall be made from sheet steel (HT Steel Conforming to grade S355JO) and confirming to BSEN 10025 and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process. pole shafts shall be provided with the rigid flange plate of suitable thickness (Fe 410 conforming to IS 226 / IS 2062) with provision for fixing 4 no. foundation bolts, This base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside.The octagonal Poles shall have lockable door of approximate 500 mm length at the elevation of 500 mm from the Base plate with bakelite sheet having 6A SP MCB and 16 sqmm stud type connector ( 4 nos) inside the pole at door opening for cable connection of following length and dimension as per table P-01 with base plate and foundation bolt on the Existing cement concrete foundation.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .Poles with Octagonal Cross Section 8 Mtr.

Providing and Laying RCC Foundation for Octagonal / Conical Street Light poles, High mast Poles as per Drawing attach at Table P-4 with Following Procedure & All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . A) Excavation of Pit for Foundation Size upto required depth from Ground level B) Dressing of Pit and Dry stone pitching 200 mm thick including supply of stones and preparing surface complete. C) Providing and laying in position cement concrete of M-10 grade of 75 mm thickness D) Reinforcement for R.C.C. work with TMT bars including straightening, cutting, bending, placing in position and binding all complete. E) Centring and shuttering including strutting , propping etc. and removal of form work for Footing and Pedestal F) Providing & Fixing of 2 no. Required Size PLB HDPE Pipe & Foundation Bolt with template as per OEM Recommendations. G) Providing and Laying Reinforce cement Concrete of M-25 grade in Footing and Pedestal including Curing the foundation for 7 days. H) Providing and Fixing Nosing Angle 40 mm x 40 mm x 6mm with 2 no. 100 mm long, 10 mm dia. Lugs on each face.Pole Foundation for Octagonal pole from 7 Mtr. To 9 Mtr.

Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing including cost of cutting, bending, welding etc. The frame work shall be supported in wall with the help of MS brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of size 300x230x300mm including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding the steel work will be given a priming coat of "ZINC" primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid.)

Supply & Installation of IP-20 & IK-08 , UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with 'U'Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19" angles with wall mounting provision on wall. Accessories like: 1 No of 19" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .9 U Rack with Width 600 mm & Depth 400 mm + 100 mm

Supply & Installation of IP-20 & IK-08 , UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with 'U'Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19" angles with wall mounting provision on wall. Accessories like: 1 No of 19" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .6 U Rack with Width 600 mm & Depth 400 mm + 100 mm

16 port Unmanaged Network PoE Switch: 16 port PoE Switch with PoE standard of IEEE 802.3af , IEEE 802.3at, PoE port, Uplink ports

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. 3x 1.5 sq.mm

Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with HDPE, U/UTP (Unscreened/Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Outdoor Cable as per latest ammendments of ANSI/TIA/EIA-568 C.2 & ISO/IEC 11801 2nd Ed, The copper conductors should be balanced twisted in pairs, seperated by a cross divider & protected by LSZH PVC outer jacket of UV resistant. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. Should meet IEEE 802.3af & IEEE 802.3at for POE applications. Cable Should support Ethernet 10GBASE-T according to the standards. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . (CAT 6 CABLE)

32ch Network Video Recorder- Connect Up to 32 IP Cameras, Dual OS, Up to 8 Megapixels Resolution, HDMI and VGA independent outputs provided, HDMI Video output at up to 4K (3840 × 2160) resolution , VGA upto 1920 × 1080, Support H.265, MJPEG, Incoming Bandwidth 256 Mbps, 4 SATA Hard Disks, ANR Technology, 4 SATA interfaces for 4 HDDs and capacity of each HDD upto 6TB, 3× USB at least 1 × USB with 3.0, Alarm I/O 16/4, RS-485, RS-232, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, BIS certified.

SITC of 55'' 4k Resolution or Better LED TV with remote control and wall mount unit / floor stand complete with making connections etc. as required.

Supply, Drawing and Testing, of stranded Single mode (9/125 μm) glass optic fiber cable, as per latest ammendments of TIA/EIA 568/ISO/IEC, construction of LSZH outer sheath cable, cable should be used for LAN and WAN back bones, . With its LSZH sheathing these cables should be ideal for indoor/outdoor installations in existing MS/PVC /HDPE Conduits/ slotted channels with ferruling at both ends for identification complete in all respect.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 6 fiber

Supply, Installation, & Testing of 19" 1U Rack Mounted/ surface mounted aluminum/ CRCA 1.2mm powder coated, multimode glass Fiber Optic Cable Patch panel/LIU loaded with flangless/screwable adapters for ST/E-2000/SC/LC/MT-RJ/PC type, It should have easy removable Top plate with push buttons, there should be a splice tray installed in the Patch panel/LIU which can handle the fiber cores, splice tray should be PC+ABS material, it should include accessories like mounting hardware, gormetts, heat shrink tubes/sleevs, screws, nuts to install the panel for rack/wallmount applications as per requirement complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .Multi Mode LIU 24 Ports