Construction of 11KV Feeders for 33/11KV, GIS Sub station, under IPDS, on turnkey basis. Package-A (Roorkee)

Amount

ST Pole SP-72 (Bottom Portion Hot Dip Galvanised)

MS Channel 100x50mm

MS Angle 65x65x6mm

Pin insulator 11kv polymer

Disc insulatator 11kv polymer

Disc fitting 11kv Dog/Raccon 45 KN

Cable 11 KV XLPE 3X300 sq.mm.{(4X80 mtr) for two feeder Spare also}

Jointing Kit for 3X300 sq.mm.11 KV XLPE Cable (O/D)

Stay Set 16 X 1800

G.I. Stay Wire 7/10 SWG

ACSR DOG Conductor

Earth Rod 20x2500mm

Earth wire 7/16 swg

GI wire 6 swg

GI wire 8 swg

LT Clamp with Nut & Bolt

LT AB Cable Suspenstion clamp with J-HOOK

LT AB Cable Dead End clamp with J-HOOK

AB Cable Piercing Clamp 120-120 sq.mm.

PP Clamp SP-72 with N&B

Stay clamp SP-72 pole with N&B

G.I Pipe

G.I Pipe Holding Clamp

Earth wire clamp for sp-55 with N&B

Description of Work / Item(s)

Amount

ST Pole SP-72 (Bottom Portion Hot Dip Galvanised)

MS Channel 100x50mm

MS Angle 65x65x6mm

Pin insulator 11kv polymer

Disc insulatator 11kv polymer

Disc fitting 11kv Dog/Raccon 45 KN

Cable 11 KV XLPE 3X300 sq.mm.{(4X80 mtr) for two feeder Spare also}

Jointing Kit for 3X300 sq.mm.11 KV XLPE Cable (O/D)

Stay Set 16 X 1800

G.I. Stay Wire 7/10 SWG

ACSR DOG Conductor

Earth Rod 20x2500mm

Earth wire 7/16 swg

GI wire 6 swg

GI wire 8 swg

LT Clamp with Nut & Bolt

LT AB Cable Suspenstion clamp with J-HOOK

LT AB Cable Dead End clamp with J-HOOK

AB Cable Piercing Clamp 120-120 sq.mm.

PP Clamp SP-72 with N&B

Stay clamp SP-72 pole with N&B

G.I Pipe

G.I Pipe Holding Clamp

Earth wire clamp for sp-55 with N&B

Description of Work / Item(s)

Amount

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work

Erection of following Single support pole of SP-72 in proper level and alignment alongwith fixing of all accessories, like top channel & clamps as per RESSPO construction Manual.

Erection of following Double support pole of SP-72 in proper level and alignment alongwith fixing of all accessories, like top channel, X-bracing & clamps as per RESSPO construction Manual.

Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block including cost of Cement,sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO construction Manual.

Muffing of poles size 0.45 cm x 0.60 cm radious with cc 1:3:6 (1 cement : 3 coarse sand : 6 graded stone 10mm nominal size) block size 45cm height from ground level including cost of cement, stone and sand etc.

Fabrication of M.S. Channel Angle iron after cutting in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESSPO sehedule and local approved drawing.

Excavation of earth for Stay pit of size 0.6x0.6x1.2mtr in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work

Fixing , tightening and nozzaling of Stay with pole and stay rod on required tension as per drawing / RESSPO manual.

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block including cost of Cement,sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.

Laying, Spreading, Stringing and sagging of 11 KV / 33 KV line in 3 phase (3 Phase 4 wire) of the following wire as phase wire with G.I. earth wire complete including fixing of all accessories in 3 Nos. conductor in parallel with binding and jumpering as per profile and profile and sagging chart.

Digging of trench of size 0.60x0.15 x 1.5 mtr. and laying of underground 11 KV XLPE cable with making of brick housing and filling of sand including filling of earth with ramming. & repairing of road including cost of cement sand and stone blast

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the helpof G.I. wire as per construction manual.

Guarding of Line over ( Telephone/Road/LT line crossing as per drawing with 6/8 swg GI wire including fixing of guarding channel/ angle as per RESOP manual . LT/11kv/33kv

Disconnection of LT service cable

Reconnection of LT service cable

Dismentling of LT AB Cable

Resagging of LT AB Cable

Dismantling of existing LT/HT line (PCC Pole) including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store

Painting of poles with angle and channel and all steel part by one coat of Rod Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level.

Fixing of Dead End clamps with J-Hook with Nut Bolt.

Fixing of Suspension clamps with J-Hook with Nut Bolt.

Fixing of following shear head type insulation peering connectors.

FABRICO INDIA PRIVATE LIMITED

FABRICO INDIA PRIVATE LIMITED

FABRICO INDIA PRIVATE LIMITED

FABRICO INDIA PRIVATE LIMITED