Shreshth DDO Puruskar Grant

Name of Work :-

Constructing of Anganwadi Kendra of Baraiya vago at Changa of Petlad Taluka, Ta.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Item Description of Item

(with brief specification and reference to Quantity Unit Amount

No book of specifications)

1 Excavation for foundation up to 1.5 M Depth including sorting 58.000 Cum 212.52

out and stacking of useful materials and disposing of the

excavated stuff up to 50 meter lead (A) Loose or soft soil

2 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 13.400 Cum 2743.23

Coarse sand : 8- Graded Brick bats aggregate 40mm normal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth (upto 10 ton)

3 Brick work using common burnt clay building brick having 32.250 Cum 4214.33

crushing strength not less than 35 kg/sq. cm. in foundation and

plinth in cement mortar 1:6 (1 Cement : 6 fine sand) (B)

4 Filling available excavated earth (excluding rock) in trenches 20.100 Cum 136.92

plinth, sides of foundations etc. in layers not exceeding 20 cm

in depth consolidating each depo sited layer by ramming and

5 Providing and laying cement concrete 1:2:4 (M-150) (1 6.450 Cum 4470.64

Cement : 2 coarse sand : 2 Crushed stone aggregates 20 mm

nomial size) and curing complete including cost of form work

in (A) Wall Caps / Coppings

6 Brick work using common burnt clay building brick having 30.050 Cum 4256.44

crushing strength not less than 35 kg/sq. cm. above plinth level

up to floor two level in cement mortar 1:6 (1 Cement : 6 fine

sand) including extra for brickwork in superstructer above

floor two level.

7 Providing and laying Ordinary cement concrete M-200 and 0.260 Cum 6191.59

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

foundation footings, base of columns and mass concrete.

8 Providing and laying Ordinary cement concrete M-200 using 0.100 Cum 9764.14

B.T. stone aggregate and curing of concrete complete, including

the cost of form work but excluding the cost of reinforcement

for R.C.C. work in Columns for Ground floor to First floor level.

9 Providing and laying Ordinary cement concrete M-200 and 1.150 Cum 6794.89

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

10 Providing and laying Ordinary cement concrete M-200 and 1.700 Cum 7990.79

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

Lintels & chajjah

11 Providing and laying Ordinary cement concrete M-200 and 6.500 Cum 6691.21

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

SLABS for Ground Floor

12 Half brick masonry in common burnt clay building bricks 12.330 Sqm 696.33

having crushing strenght not less than 35 kg/sq. cm. in cement

Mortar 1:3 (1 cement : 3 coarse sand) with 2 nos of 6 mm mild

steel round bars after every threle course embedded in cement

mortar in foundation and plinth (B) Conventional

13 Providing 15 mm. thick cement plaster in single coat on 416.000 Sqm 232.68

brick/concrete wall for interior plastering upto floor two level

finished even and smooth in (i) cement mortar 1 : 4 (1 cement :

4 sand including extra for finishing with a floating coat of neat

14 Providing 10mm thick cement plaster in single coat on 56.500 Sqm 187.09

brick/concrete walls for interior plastering upto floor two level

and finished even and smooth in (ii) Cement mortar 1:4 (1-

cement :4-sand including extra for finishing with a floating

coat of neat cement slurry.

15 Providing TMT Bar FE 500D reinforcement for R.C.C. work 1438.000 Kgs 77.29

including bending, binding and placing in position complete

upto floor two level

16 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 56.490 Sqm 1311.18

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with color cement slurry including finised with flush pointing

& cleaning the surface etc. complete for light shade

17 Providing and laying Kota stone slab flooring over 25 mm 12.760 Sqm 1019.39

(Average) thick both side polished Kotah stone for shelves of

Cupboard including making grovees in walls and finishing with

C.M 1:3 & curing rubbing etc Complete.

18 White Glazed Tiles 6mm thick in flooring treads of steps and 12.200 Sqm 953.74

landing on a bed of 12mm thick cement mortar 1:3 finished

with flush pointing in white cement.

19 Applying two coats of primer of approved brand and 165.000 Sqm 105.02

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth

and Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surfaces to give an even shade including thoroughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

20 Applying two coats of primer of approved brand and 308.000 Sqm 142.43

manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth

and Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all dirt,

and remains of loose powdered materials.etc complete

21 Providing and laying broken chine mosaic flooring for 46.100 Sqm 779.70

terrace using 12 mm to 20 mm broken pieces of glazed tiles to

be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water and oxalic

acid etc. as directed.

22 Providing and fixing colour anodised single shutters Door 30 5.400 Sqm 7740.26

mm having standard extruded alluminium colour anodized

hollow sections frame Equvalent to Jindal Door section

No.19552 of size 38 mm x 63.5 mm (aproximate wt. 1.2 kg per

Rmt) with wooden inserts for Durable grip of door hinges. with

3.8 cm th. shutter flush door solid core finished with 1 mm

Lamination on Both side with S.S Handle & other Fixtures .

23 Providing and fixing window having extruded aluminum 7.940 Sqm 1583.95

Colour anodized section frame main outer size 95mm x 24mm

x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt),

horizontal Three track member size 92mm x 31.75mm x

1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical

member of size 92mm x 31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm (of Jindal Section

no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm

x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as

per details etc

24 Providing and laying cement concrete flooring 1:2:4 (1-cement 1.850 Sqm 314.02

: 2-coarse sand : 4-graded stone aggregate 20mm nominal

size) laid in one layer and finished with a floating coat of neat

cement. (A) 40mm thick.

25 Providing Sock well of inside Dimension 3.00 mt. Deep & 2.00 1.000 Nos 26069.09

mt. Dia. Incl. Excavation, honey comb masonary work in C. M.

1:6 incl. Covering the top with slab and providing mainhole

cover incl. Providing vatas and curing etc. complete.

26 Constructing a cooking platform 60 cm. Width & 70 cm. Height 2.100 Rmt 2656.06

resting on B. B. masonary walls 23 cm thick in C. M. (1:6) with

fixing black kadappa stone 30 mm thick laid on precast R.C C.

1:2:4 slab with plastering on exposed faces of wall in C. M. (1:4)

27 Providing and fixing to wall ceiling floor 10.0 Kg. F/Cm2 11.100 Rmt 280.23

working pressure polythene pipes for soil waste and

ventilating pipes of the following outside dia. low density,

complete with necessary fittings ,wall clamps etc including

making good the wall ceiling and floor. {Finolex, Supreme,

Prince or equivalent brand} (A) 75 mm

28 Providing and fixing to wall ceiling floor 10.0 Kg. F/Cm2 5.000 Rmt 339.05

working pressure polythene pipes for soil waste and

ventilating pipes of the following outside dia. low density,

complete with necessary fittings ,wall clamps etc including

making good the wall ceiling and floor. {Finolex, Supreme,

Prince or equivalent brand} (B) 110 mm

29 Constructing brick masonry chamber for underground C.I. 1.000 Nos 2932.93

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.(i)

Inside dimensions 455mmx 610mm and 450mm deep for

single pipe line. (upto 10 ton)

30 Providing and fixing S.W. gully trap with C.I. grating brick 1.000 Nos 1291.26

masonary chamber and water tight C.I. cover with frame of

300 mm x 300 mm Size (inside) with standard weight (i)

Square mouth traps. (A) 100 mm x 100 mm size - P type

31 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 3.000 Nos 586.27

100 mm diameter with jali of the following nominal diameter

of self cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

32 Providing and fixing water closet Squtting pan (Indian type 1.000 Nos 1458.05

W.C. pan) size 580 mm (earthwork, bed concrete, foot rests

and trap to be measured and paid for separately) (A) Vitreous

china - (i) Long pattern-white colour. including Providing and

fixing 100mm size P or S trap for water closet squatting pan

including jointing the trap with the pan and soil pipe in cement

Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China.and

Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-

coarse sand)a, pair of white vitreous China 250mm x 130mm x

30mm footrest to long pattern squatting pan water closet.and

Providing and fixing G.I. inlet connection for flush pipe with

33 Providing and fixing wash basin with single hole for pillar tape 1.000 Nos 2483.66

with C.I. or M.S. brackets painted white including cutting holes

and making good thesame but excluding fittings. (A) vitreous

china : (ii) Flat back washbasin 550 mm x 400 mm size (i) IN

white colour. including Providing and fixing C.P. brass waste

for washbasin or sink. (A) 32mmdia.and Providing and fixing

M.I. fisher union for washbasin or sink. (A) 32mm dia.and

Providing and fixing pillar tap, capstan head, screw down high

pressure with screws, shanks and back nuts. (i) 15mm

dia.and Providing and fixing brass screw down stop tap.(A)

15mm dia. and Providing and fixing chromium plated, bottle

trap with necessary couplings of approved quality for wash

34 Providing laying and jointing in true line and level 15mm dia. 15.000 Mtr 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make

PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

35 Proving and fixing 75mm dia PVC Cowl vent 2.000 Nos 9.41

36 Providing and fixing Gun metal check or non return full way 1.000 Nos 186.93

wheel valve (A) 15 mm. dia.

37 Providing and fixing screw down bib taps of follwing size (A) 3.000 Nos 186.93

Brass screw down bib tap polished bright. (i) 15 mm dia

38 Providing and fixing ball cock of approved quality as directed. 2.000 Nos 189.84

(A) Copper Metal

39 Supplying and fixing PVC water tank of ISI make including 2000.000 Litr 3.95

delivery at site, supply and fixing of inlet, outlet, air vent

overflow, Ball cock, drainage sleeves of the specified size, with

necessary neo-prene gasket / packing / washers, GI washer &

check nuts etc. complete as directed on terrsce, loft in

bathrooms etc in any height. The rate shall include for fixing

additional accessories supplied by the supplier accessories.

40 Filling in foundation with sand under floors including watering 2.440 Cum 481.80

ramming, consolidation and dressing etc complete

41 Providing and fixing M.S. grills of required pattern to wooden 252.100 Kgs 106.23

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts

and nuts or by screws (A) Plain Grill.

42 Painting & lettering the title & Logo board of Aganwadi as 1.000 Nos 1515.00

directed by Engineer in charge.

43 Providing and fixing Number plate of Glazed Acrylic Material 1.000 Nos 6060.00

with frame of required size fixing with SS studs including

finishing and printing letters/matter etc. completes.

44 Point wiring for Light / Fan / Bell / Primary Point with 2-1.5 14.000 Point 493.89

Sq.mm & earth wire of 1.5 Sq.mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in /

flushed on wall /ceiling, complete with 6A Tissino Type ISI

marked flush type switch / bell push and accessories erected

on Metal / PVC Box covered with 3 mm thick PC

(Polycarbonate) / Acrylic sheet with necessary Lamp holder /

ceiling rose / H.D. Connector as directed. (c) with oval conduit

/pvc casing capping double lock type

45 Point wiring for looped PLUG with tissino type single pole ISI 4.000 Point 71.71

marked 6 A. switch and 6 A socket erected with necessary

connections erected on polished wooden block / Metal / PVC

box covered with 3 mm. thick laminated sheet for open /

concealed wiring.

46 Providing and erecting 1.5 mm. thick FIA approved and ISI 30.000 Mtr 26.26

mark (embossed) riged PVC pipes of following size complete

erected with necessary PVC fittings & junction boxes fixed with

adhesive solution & clamps with following type of erection.

(1) For Open wiring 20 MM

47 Mains with 1.1 KV grade FRLS PVC insulated ISI marked 30.000 Mtr 124.23

stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

48 Providing & erecting following shockproof of tissino type 1.000 Each 140.39

accessories erected on 3 mm. thick laminated sheet in wooden

/ PVC / metal box erected on wall / ceiling. (6) One No. single

pole 16 A switch & one No.6/16 Auniversal socket combined

with indicator & fuse

49 Providing & erecting following shockproof of tissino type 3.000 Each 18.18

accessories erected on 3 mm. thick laminated sheet in wooden

/ PVC / metal box erected on wall / ceiling. (7) Bakelite ceiling

50 Providing & erecting following shockproof of tissino type 10.000 Each 23.23

accessories erected on 3 mm. thick laminated sheet in wooden

/ PVC / metal box erected on wall / ceiling. (8) Bakelite lamp

51 Erection & connection charges for 16A/32A D.P as following 1.000 Each 60.60

(b) On polished wooden block

52 Providing make double pole plastic switch and fuse 250V 30A 1.000 Each 151.50

confirming to ISS erected on polished wooden block as

directed (b) On polished wooden block.

53 Providing 2.5mm.thick laminated acrylic sheet to cover the fan 3.000 Each 20.20

hook or Fan box.

54 Pipe type earthing having 150 cms long and 2.5 cms dia 1.000 Each 434.30

galvanised iron pipe with coupling and buch burried

inspecially prepared earth pit complete with necessary 8 SWG

55 For using salt and charcoal / cole as required for pipe type 1.000 Each 202.00

56 Approved make ceiling fan with condenser A.C. 230 V50 3.000 Each 1883.65

Cys.1200 mm. sweep complete canopy and 30 Cms. down rod

resistance type regulator erected on existing hook or clamp

with 24/0.2 flat 3 core flexiblewire with earthing (or R.C. rate)

57 Supplying and erecting approved make of tube fitting with One 10.000 Each 464.60

no T-5 tube 24/ 28 W with Electronic ballast with each tube

separately THD less than 10 & built in adaptors, GI / PVC

housing & mirror optic reflector, suitable to work on 120V -

300V, A.C. supply with connector and adapter if required.

[Make of fitting & tube may be differ& fitting shall be providing

with tube] CAT II

58 Supplying KITKAT pattern porcelain cutout with base of 2.000 Each 85.85

following current capacity erected on existing block board.

59 Plastic encloser fitted with din rail suitable for incorporating 2.000 Each 60.60

one / two nos. MCB

60 MGVC Ltd. meter connection charges 1.000 Each 38380.00

61 Supplying & erecting approved make self-priming domestic 1.000 Each 5686.30

monoblock water pump with 0.5 H.P. motor, suitable for

operation on 230 volts 50 c/s. AC supply with metallic flange,

delivery and discharge of 32 LPM at 10 mtrs.head.

I / We am / are willing to carry out the work at ________________________________ % above / below percent

(should be written in figure and words) of the estimated mentioned above. Amount of my / our tender works out as

Estimated amount put to Estimated amount put to

Deduct ________ % below Rs. ____________ Add _______ % above Rs.___________

(* Please strike out whichever is not applicable)

1. All work shall be carried out as per public works Department Handbook and other specifications of Division or as directed.

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the

contractor under his signature.

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all respects and hold good for work

under all conditions, site, moisture, weather etc.

4. To be Continued on additional sheets, if found necessary.

5. The Labour Cess shall have to be deducted from payable bill as per prevailing Rules.

6. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No. PARACH / 102008 / 61 / C,

Dt. 03/05/2008 attached with tender papers.

7. The contractor is totally responsible to bare all applicable taxes i.e. G.S.T. etc. & Department will not entertain any contractor

representation to reimburse any financial burden due to applicable taxes, i.e. G.S.T. etc.

Signature of Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat (R&B) Sub Division Panchayat (R&B) Division