Lift Irrigation System of Jogpura Irrigation Schemes at Village Gadh, Taluka: Jetpur Pavi, District: Chhota Udepur.

• BILL OF QUANTITIES

PANCHAYAT IRRIGATION DIVISION- CHHOTAUDEPUR

Name of Work :- Lift Irrigation System of Jogpura irrigation schemes At-

Village gadh, Taluka: Jetpur Pavi, District: Chhota Udepur

• BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Description Qty Unit Rate R&B SOR Amount

Providing and constructing cofferdam

in river basin including excavation

,filling, middle portion with soil (in

empty Cement/Gunny bags) to the

1 entire satisfaction of EIC till 6903.00 Cum 426.66

completion of the work including

dismantling coffer dam after

completion of the work as directed by

Excavation for foundation in

overburden in all sorts of soil hard

murrum , gravel etc including shoring

, strutting and depositing the

excavated stuff in regular stacks or

layers with lead up to 500 mtr and all

lifts. (By Machinery). Excluding

Dewatering during excavation of

canals, drains, foundation trenches

etc. by using pumps of suitable

3 capacity either diesel or electric 1000.00 HP/Hr 53.80

driven including cost of labour, pipes

etc. for delivery distance beyond

m. (By Machinery)

Providing & Laying in position

"NOMINAL MIX" cement concrete

using cement, sand and crushed

aggregate by mass and machine mix

for C.C./R.C.C work incl. necessary

formworks centering, scaffolding,

4 compaction by vibrator, curing as 98.66 Cum 4296.00

directed with all lead & lift etc

complete Without Dewatering and

excluding cost of steel

reinforcement.(A) For Foundation

concrete / General purpose. (f) C. C.

Nominal Mix, M-20 and MSA-20 mm

Providing & Laying in position

"DESIGN MIX" cement concrete using

cement sand and crushed aggregate

for C.C./ R.C.C work by "FLORI"

including necessary formwork,

centering, scaffolding, compaction by

vibrator, curing as directed with all

5 lead & lift etc complete without 215.61 Cum 4651.00

dewatering and excluding the cost of

steel reinforcement.

(A) For Footing of column / Abutment

/ Pier / Bottom slab of barrel / Plinth

course / Coping / Approach Slab etc.

(e) Concrete grade M-25 and MSA-20

Providing & Placing in position

reinforcement bars including cutting,

bending, welding joints where

necessary, hooking etc. complete as

per drawing for all lead and lifts. TMT

/ CRS (FE 500 D)

Backfilling the foundation trenches

around the structures etc with

7 selected excavated stuff including 2873.63 Cum 36.90

watering, ramming, compacting etc.

complete. (By Machinery)

Providing and fixing rolling shutters

of approved make made of 80 mm

wide M.S. laths inter-locked together

through their entire length and

jointed together at the ends by end

locks mounted on specially designed

pipe shaft with bracket plates, guide

channels and arragements for inside

and outside locking with push-pull

operation including the cost of hood

cover and spring etc. complete.(A)

Shutters having width below 3.5 M.

Providing and fixing window having

extruded aluminum Colour anodized

section frame main outer size 63.50 x

horizontal two track member size

wt.of 0.695 Kg/mt, vertical member of

size 61.85 mm x 31.75mm x 1.30 mm

@ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size

0.456Kg/mt, vertical member of size

0.456Kg/mt, @ Wt. 0.457 Kg/mt with

5 mm thick transparent bronze colour

tinted float glass with powder coated

aluminum fittings and fixtures and

transparent silicon sealant glass fixing

to frame as per details etc complete

Providing and laying burnt brick

masonry in foundation ordinary

portland cement mortar 1:5

proportion including, curing etc.

complete for all leads and lifts.

(Conventional Bricks)

Providing cement plaster in thickness

and proportion as under including,

smooth finishing, curing, scaffolding

etc. complete for all leads and

lifts.Cement mortar 1:3 proportion.( a

Providing cement plaster in thickness

and proportion as under including,

smooth finishing, curing, scaffolding

etc. complete for all leads and

lifts.Cement mortar 1:3 proportion.( b

Providing and laying cement concrete

flooring 1:2:4 (1-cement : 2-coarses

and : 4-graded stone aggregate 20mm

nominal size) laid in one layer and

finished with a floating coat of neat

cement. (B) 50mm thick.

Providing and laying polished kota

stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1-

14 Cement : 3 coarse sand) and jointed 28.26 Sqm 1193.66 1205.59

with gray cement slury mixed with

pigment to match the shade of slab

including rubbing and polishing etc.

White washing with lime on wall

surface (two coats) to give an even

shade including thoroughly booming

the surface to remove all dirt, dust;

mortar drops and other foreign

Finishing wall with water proofing

cement paint of on wall surfaces (Two

16 coats) to give an approved brand and 865.17 Sqm 61.81 62.42

manufacture and of required shape

even shade after thoroughly brushing

the surface to remove all dirt and

remains of loose powered materials.

Providing and fixing post and 40 mm

dia pipe railing as per detailed

drawing including angle iron post of

size 80mm x 50mm x 10mm (Height

1.2mt) fixed in C.C. block (M-15

MSA20mm) of size 0.30 m x 0.30 m x

0.30 m etc. as per specifications

including 3 coats of oil painting to

steel work and as directed etc.

complete.( a ) Three rows

18 Heavy Duty Exhaust Fan 2.00 No 5000.00

Providing and fixing C.I. Manhole

19 cover 0.60 M. x 0.45M. size having 5.00 Kg 948.68 958.16

weight not less than 35Kg.

Providing and laying in position

Ready Mixed M-300 grade concrete

for reinforced cement conctere work

using cement content as per approved

Design Mix manufactured in fully

automatic batching plant and

transported to site of work in transit

mixer for a lead up to 10 kms having

continuous agitated mixer,

manufactured as per mix design of

specified grade for reinforced cement

concrete work including pumping of

20 R.M.C. from transit mixer to site of 180.00 cum 5107.28 5158.35

laying, excluding the cost of centering

shuttering finishing and

reinforcement including cost of

admixtures in recommended

proportions as per IS: 9103 to

accelerate/ retard setting of concrete,

improve workability without

impairing strength and durability as

per direction of the Engineer - in -

charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be

maintained) (Cement level 475 kg )

Providing and fixing metal expansion

joints as per drawings. Details of

expansion joint 50 x 50 x 6mm size

two IS and 100 x 6mm MS plate with

x 20 x 25mm long hold fast @ 50 cm /

cc on both sides of expansion joints.

Providing formwork of ordinary

timber planking so as to give a rough

finish including centering shuttering

22 strutting and propping etc. height of 1005.93 sqmt 416.51 420.67

propping and centering below

supporting floor to ceiling not

exceeding 4 M. and removal of the

same for in situ reinforced concrete

and plain concrete work in. (G)

Columns PillarsPosts and struts.

(2)Circular or curved in Plan.

Providing and laying uncoursed

rubble masonry in ordinary portland

23 cement mortar 1:5 proportion in 198.11 Cum 3555.50

foundation including curing etc.

complete for all leads and lifts.

Providing submerged centrifugal

pump sets (water immersed, dry air

filled, class "F" insulated TEWC motor

integrally mounted on volute casing

pump sets for water duty, 3-phase,

± 3% Hz, 415 ± 10% V along with

suitable foundation / installation

device with cable length from pumps

to panels & of following Material of

Construction: Impeller: CF8M, Casing:

C.I. FG 260, Wearing Ring: SS, TC

mechanical seal, CS/SS bearing, SS

shaft with sleeve, SS strainer & MS

Providing and Fixing I S I mark

following class & dia of different type

of valves with necessary fittings of

standerded design and specification

incl. testing with all leads and lifts

etc.complete.Sluice Valve. 150 mm dia

Providing and Fixing I S I mark

following class & dia of different type

of valves with necessary fittings of

standerded design and specification

incl. testing with all leads and lifts

etc.complete.Reflux Valve.150 mm dia

Providing and supplying lSI mark Cl

D/F Butterfly Valves as per 15:13095

(Latest Edition) of following class and

diameter including all taxes,

insurance, transportation, freight

27(A charges, octroi, inspection charges,

) loading, unloading, conveyance to

departmental stores. stocking etc.

Butterfly valves IS 13095 with lSI

Size: 150 mm NB (on header)

Lowering, laying and jointing in

position following C. I. I D/F Reflux

valves, Butterfly valves, Sluice valves

B and Air valves including cost of all 27.00 No. 585.00

labour, jointing material,including nut

bolts and giving satisfactory hydraulic

testing, etc. complete.

Providing and Fixing I S I mark

following class & dia of different type

of valves with necessary fittings of

standerded design and specification

incl. testing with all leads and lifts

etc.complete.Air Valve (Double

Acting). 40 mm dia

EXPANSION BELLOWS:

Supply, installation, testing &

commissioning of flange ends

Expansion Bellow as per EJMA

standards of overall length of

minimum 300 mm, designed for 15

mm axial compression and 5 mm axial

extension with tie rods etc. of

following MOC & pressure ratings.

MOC: Bellows: SA 240 Gr. 304;

Internal Sleeve: SA 240 Gr. 304;

Weldends: IS 2062 Gr. B; Flanges: IS

2062 Gr. B (Drilling as per IS 1538 / IS

6392 ) & Limit Rods & Nuts: CS - IS

Size: 150 mm NB- 2 on Delivery side,

Providing and jointing ISI mark

M.S.pipe of requier length with

M.S,Flange of following dia by

necessary cutting & welding works &

laying the same in excavated trench of

rising main, suction / delivery of

pump motor. after laying the flanged

pipes joint with necessary nut bolt of

required size by using rubber packing

of required thickness . after fitting

M.S.Pipe. Paint the M.S. pipe wih

anticorrsive paint etc comp.

Size: 200 mm dia. ( 6.30 mm thick)

(on Delivery side)-As per site

Providing and laying in position

including testing following all flanged

cast iron blank flanges (200 mm Dia)

PRESSURE GAUGE:

Design, Supply, Installation, Testing,

Commissioning of Bourdon Type

Pressure Gauge, ±1% accuracy, Direct

bottom 1/2" NPT (M) process

connection, IP 67, Glycerine filled,

32 SS304 Case with Bayonet Type Bezel, 2 No. 1029

SS316 L Bourdon Tube, SS

Movement material, Aluminium dial

with black graduation on white

background, Micro Zero adjustable

pointer, neoprene gasket, Blow out

disc, shatter proof glass, SS tag plate

Range: 0 - 6 kg / sq.cm.

FLOW METER:Design, Supply,

Installation, Testing, Commissioning

of Full Bore Electromagnetic flow

meter with factory calibration, Inbuilt

Battery Power Operated, flanged

connection, Flow sensor, Indicator,

transmitter and totaliser with all

accessories viz. surge arrestor,

associated cables, cabinets,

hardwares, etc complete as per

following specifications:Flow Meter/

Sensor:DC pulsed type, IP

Protection, Flanged process

connection as per IS 1538 or

equivalent standard, SS304/ Metallic

Alloy Flow Tube, SS316/ SS 316 L/

Hastelloy Sensor, SS316/ Hastelloy

Grounding Ring/ Inbuilt Grounding

Electrode, Neoprene/Polyurethane/

Hard Rubber/ Rilsan lining, SS304/

Die Cast Aluminium/ Carbon steel

with Anticorrosive Paint Coil Housing

with Junction Box, CS flanges.Flow

33 Transmitter/ Converter ( Remote 1 No. 210688

Field Mounted):Microprocessor

based, Modular design, 2 line LCD for

indication of actual flow rate, forward,

reverse, sum totaliser display, ±0.5%

accuracy at 0.3 to 4 m/sec velocity,

one scalable pulse/ one status, one

Modbus output, one GPRS/ GSM

output, IP 67 protection, Die cast

aluminium/ polycarbonate/ SS316

with Anticorrosive Paint/ PU finish

with glass window enclosure, Inbuilt

EEPROM and Data Logger, 20 meters

cable length for sensor to transmitter

communication, Minimum 5 years

battery lifetime, 3.6 VDC

NonRechargeable Lithium-thionyl

chloride/ Ni-Cd high power batteries,

Hourly Basis Worldwide transmission

of measured data and events via e-

mail and SMS by integrated

GSM/GPRS modem, Reliable data

storage facility through integrated SD

card etc alongwith wall mounted/

stand mounted cabinet.Meter Size :

EOT Crane (Circular):-

Supply, installation, testing &

commissioning single girder type fully

electrically operated EOT crane with

electrically operated hoist, class II

duty, geared travelling trolley with

seven meter lift complete with long

travel rail track (40 mm sq. bar),

34 moving or cross girder, all three 1 No. 368250

motions electrically operated by

suitable rating motor IP 54, control

panel & down pendant control block,

brake, safety device, cables form

motor to starter panel & other

required accessories & tested as per IS

Specifications.

Providing, S.I.T.C of Structure Steel at

site of work with freight, loading,

unloading carting, etc. including all

taxes and duties complete such as

joints, channels, angles, Iron Rails,

35 ISA/ISMC/ISMB/MS flat, Plates, 80.00 Kg 85.00

Chequered plates (below 10mm

thickness) etc. required for support

structure of Elecrto- Mechanical

equipments etc. for support on floor /

wall / beam / brackets etc. as per

Manufaclure. Supply & Delivery of

Electric Resistance Welded (Up to

400mm)/Submerged Arc

Welded(Above 400mm) M.S.Pipe

having beveled ends plate or coil

conforming to IS-3589-2001 or its

latest revision/ ammendment for

following thickness outside diameter

at GWSSB store or sile anywhere in

Gujarat State including all taxes.

insurance, lransportation, freight

charges, oclroi, inspection charges,

loading, unloading conveyance to

Departmental stores, stacking etc. all

complete. (Rate for MS Pipe based on

the ex. works price of HR Coil as

Rs.58500.00 per MT- withouth GST

(Above 3.15 mm to 10 mm) & Rs.

59000.00 per MT without GST (Above

10 mm) as on Jan-23.( WPIIndex of H.

R Coi! of Dec-22 is 144)

SG-S/1000X1000-C1-WTM-M3-UFO

Cast Iron Wall Thimble Mounted

Sluice Gate as per IS: 13349 Standard,

Size: 700 (W) x 700 (H) mm, Suitable

for upto 10 m seating as well as

unseating Operating water head, 11 m

CL-PL distance, Manually operated

with indicating arrangement, Rising

spindle, Flushbottom closure

arrangement, Upward Opening, Open

top flange back frame gate. (Design

Head Class-II type)

Providing and supplying D. I. K-9

grade pipes for following nominal

bore diameter with internal cement

mortar lining including all taxes,

insurance, transportation, freight

charges, octroi, inspection charges,

loading, unloading, conveyance to

departmental stores, stacking etc.

complete. (IS 8329-2000). Rate for DI

pipe based on Wholesale Price index

of Pig Iron as 157.60 for the month of

Manufacture, Supply & Delivery of

Ductile Iron Flange socket spigot

bends, tees, reducers or any other

specials as per BS-EN-545/1995

Class-A series K12 suitable for use

with D.I. Pipes manufactured as per

IS:8329/1994delivery of specials is to

be made to GWSSB store or site of

works any where in Gujarat including

all taxes, loading, unloading, carting,

stacking, insurance, inspection

charges, octroi etc. complete.

Providing and Fixing I S I mark

following class & dia of different type

of valves with necessary fittings of

standerded design and specification

incl. testing with all leads and lifts

etc.complete. Sluice Valve

Supply, testing & commissioning of

flange ends Expansion Bellow as per

EJMA standards of overall length of

minimum 300 mm, designed for

mm axial compression and 5 mm axial

extension with tie rods etc. of

41 following MOC & pressure ratings. 4.00 Nos. 6138.00

MOC: Bellows: SA 240 Gr. 304;

Internal Sleeve: SA 240 Gr. 304;

Weldends: IS 2062 Gr. B; Flanges: IS

2062 Gr. B (Drilling as per IS 1538 /IS

6392 ) & Limit Rods & Nuts: CS - IS

Providing and Fixing I S I mark

following class & dia of different type

of valves with necessary fittings of

standerded design and specification

incl. testing with all leads and lifts

Providing & Fixing G.I.Pipe etc.Comp.

43 50mm dia GI pipe (Medium Duty) 26.50 Rmt 387.00

Excavation of pipeline

trenches/foundation trenches in the

strata shown below including

depositing the excavated stuff as and

where directed upto lead of 50 Mts.

and 6.0 Mt lift of excavation below

average G.L. including, refilling,

cleaning the site with thin jungle

cutting but excluding dewatering if

(A) Excavation in all sorts of soil. 2627.71 Cum 219.00

(B) Excavation in hard murrum. 340.20 Cum 383.00

(C) Excavation in soft rock. 340.20 Cum 492.00

Lowering, laying and jointing C. I. S &

S Spun pipes suitable for Tyton joints

/ Mortar lined D. I. Pipes of various

classes with CI / MS specials of

following diameters in proper

position, grade and alignment as

directed by Engineer-in-charge

including hydraulictesting etc. comp..

Construction of valves chambers in

brick or bela stone masonry, locally

available in C. M. 1:6. Foundation

concrete 150 mm thick in C. C. 1:4:8 of

trap metal size 25 mm to 40 mm thick,

inside cement plaster in C. M. 1:3 and

cement pointing outside in C. M. 1:3

and top cover of precast RCC slab

mm thick (with key hole in two parts,

46 each with handles or MS Bar etc.

complete as given size) Upto 1 Mt.

depth from G. L. to pipe invert level

incl. complete civil works but excl.

cost of excavation and refilling, with

cast in situ RCC slab in one single piece

with fixing of CI-MH Frame and cover

(excl. cost of CI-MH Frame and cover)

with 23 mm thick brick masonry wall

Valve chamber of Size 0.9 x 0.9 x

m size for Air Valve

(B) For 1 mt extra Depth 4.00 Rmt. 4479.00

Providing bedding incl. ramming,

watering, levelling, consolidating etc.

Complete as per standard and

instruction of engineer incharge

Providing C.C.M.:100 for encasing

pipes using trap metal size 12 mm to

50 mm incl. form work curing

consolidation etc. complete for

various location on pipe line Using

Trap Metal 20mm nominal Size

Providing and supplying ISI mark CI

D/F Butterfly valve as per IS:13095

(Latest edition) of following class and

diameter including all taxes,

49 insurance, transportation, freight

charges, octroi, inspection charges,

loading, unloading, conveyance to

departmental stores, stacking etc.

Lowering, laying and jointing in

position following CI D/F Butterfly

valves including cost of all labour,

jointing material, including nut-bolts

and giving satisfactory hydraulic

testing etc. complete.

Providing Laying & joinig in standerd

length ISI Mark regid HDPE pipes

suitable for irrigation water with self

51 joint incl. joining material (Cement

Solvent )of following class and dia as

per IS specification No.4984 /

(B) 180 mm ( Incl Main Line) 1093.00 Rmt 729.00

Providing & Laying in position

"NOMINAL MIX" cement concrete

using cement, sand and crushed

aggregate by mass and machine mix

for C.C./R.C.C work incl. necessary

formworks centering, scaffolding,

compaction by vibrator, curing as

52 directed with all lead & lift etc 0.25 Cum 3346.00

complete Without Dewatering and

excluding cost of steel reinforcement.

A) For Foundation concrete / General

(a) C. C. Nominal Mix, M-10 and MSA-

40 mm.P.C.C. in foundation for Air

Valve structure

Estimate for construction of Cross-

drainage works in command area, like

53 road crossing, nala crossing, railway 3%

crossing, river crossing, excluding

land acquisition.

11 kV Four Pole Structure Assembly:

SITC of 11 kV double pole 9 meter high

structure made of 6" X 3" 'I" section

girder, 4" X 2" channels, clamps, nuts,

bolts, stay wires including earthing

system with following accessories

duly connected with ACSR conductors

as per approved drawing & in

with requirement of IEC.

(a) 11 kV, 200 A drop out fuses with

Synthetic Resin Bonded Paper (SRBP)

54 tubes: 2 Set (01 piece per phase / 1 Nos. 151182.00

(b) 11 kV, 400 A G.O.D. switch

complete with earth switch,

insulators, operating handle with

galvanised pipe, square bar: 2 Set.

(c) 11 kV lightning arrestor with

(d) 11 kV Disc Insulators (70KN):

(e) 11 kV Pin Insulators (5KN): 6 Nos.

(f) 20 mm dia. GI. Stay Set Complete:

SITC of outdoor type, three phase, oil

immersed, distribution transformer of

required KVA & voltage ratio, copper

double wound, vector group -Dyn11,

HV delta connected & LV star

connected with neutral brought out

connected to provide separate

earthing terminals, bushing / cable

box onHV side and cable box on LV

side suitable for cables or bus duct as

per requirement with standard

fittings, conforming to IS: 1180 (Part-

1) / 2014 with its latest amendment

including first fill of transformer oil &

following accessories.

(a) Oil conservator with filling holes

55 with cap and prismatic oil level gauge. 1 Nos. 494816.00

(b) Silica Gel dehydrating breather

charged with silica gel

(c) Oil drain cum sampling valve with

(d) Oil filter valve

(e) Lifting Eyes / Hooks / Lugs

(f) Two earthing terminal

(g) Diagram and rating plate

(h) Air release plug

(i) Explosion vent with diaphragm

(j) Thermometer pocket

(k) Four bi-directional plain roller

with base channel with hauling holes

(l) Fixed / Separate type radiator

(m) Off circuit externally operated

tapping switch (For rating <

(n) 100 mm stem type oil temperature

indicator (For rating < 500 kVA)

(o) Bucholtz relay with shut off valve

(For rating ≥ 500 KVA)

(p) 150 mm dial type oil temperature

indicator with Alarm / Trip contact

(For rating ≥ 500 kVA)

(q) 150 mm dial type winding

temperature indicator with Alarm /

Tip contact (For rating ≥ 1000 kVA)

(r) Marshalling box (For rating ≥

(s) 150 mm dia. magnetic type oil

gauge (For rating ≥ 1600 kVA)

(t) Inspection cover & Jacking lugs

(For rating ≥ 1600 kVA)

Supply, laying, testing &

commissioning 11 / 11 kV (UE) grade,

XLPE insulated, stranded Aluminium

conductor, galvanised steel flat strip /

round wire armoured, extruded PVC

type ST2 sheathed, heavy duty cable

56 (to be laid on wall surface with 35 mtr 1261.00

necessary clamps / in existing cable

trench / cable trays / conduit / pipe

sleeves at road crossing or floor as per

site requirement) conforming to IS:

7098 (Part-2) & IEC:60502(Part-2), of

following sizes:.3 Core x 240 Sqmm

Providing & fitting heat shrink cable

termination / jointing kits for 11 kV

(UE) grade XLPE insulated cable

including necessary earth

connectivity connection, material &

consummables making the

termination/ joint complete ensuring

the joint resistance is within the

permissble limit as per IS, of following

3C x 240 sq mm (Indoor Termination

3C x 240 sq mm (Outdoor

Termination Kit)

LT PMCC With APFC Panel:

Design, engineering, procurement,

installation, testing and

commissioning of PMCC panel with

totally enclosed type as per IS: 2147 &

IS-8623, operation on three

phase,415V, 50Hz,neutral effectively

grounded, IP 52, with instrument

compartments indicating lamps,

control contactors as per IS:

13947,relays and control fuses air

insulated . Incoming & Outgoing

feeder deatils shall be as per Design &

SLD Drawing.ACB/ MCCB as incomer

feeder , outgoing feeder with S/D , Soft

startrer, VFD,DOL feeder & TPN

MCCB/SFU etc as per Design & SLD

1.1 kV Grade Cable- Aluminium /

Copper Conductor

Supply, laying, testing &

commissioning 1.1 kV grade, XLPE

insulated, stranded Al/CU conductor,

galvanised steel flat strip / roundwire

armoured, extruded PVC type ST2

59 sheathed, heavy duty cable (to be laid

on wall surface with necessary clamps

/ in existing cabletrench / cable trays

/ conduit / pipe sleeves at road

crossing or floor as per site

requirement) conforming to IS:7098

(Part-1) & IEC:60502

(Part-1) of following sizes:

A 1.1kV,4Cx2.5 Sq. mm ,Cu 80 mtr 81.00

B 1.1kV,3.5Cx120 Sq. mm ,Al 50 mtr 423.00

C 1.1kV,3Cx2.5 Sq. mm ,Cu 80 mtr 86.00

Double Compression Brass Cable

Providing & fitting heavy duty brass

60 cable glands (nickel-plated) with

washers & rubber ring conforming to

IS, suitable for 3, 3½ & 4 core cables of

following type & sizes:

A 3 Sq mm, 2 to 4 Core 4 Nos 73.00

B 120 Sq mm, 3 to 3½ Core 1 Nos 392.00

Cable Trays & Accessories

Supply & laying GI ladder type cable

trays with side channels of size - 75 x

rungs of size - 35 x15 x 15 mm spaced

at 250 mm apart, fabricated from

mm thick sheet steel in standard

length of 2.5 meter, duly hot dipped

galvanized after fabrication as per IS

2629-1989/ IS 4759-1984 including

accessories such as coupler plates/

fish plates, bends, tees, reducers,

elbows, covers and electro-galvanized

hardware etc, erected on existing

support as per specification and

instruction of Engineer-in-charge.

A 150(W) x 75(H) x 2.0 mm Thick 30 RM 336.00

B 300(W) x 75(H) x 2.0 mm Thick 30 RM 388.00

Earthing & Lightning Protection

Providing EARTHING & Lighting

protection for Pump house, Electrical

penel room, Out side Pump house area

& Switchyard area equipment

including Earthing pits, Electrode, GI

Strips, MS Strip as per IS 3043 & IEEE 6 Nos 815.00

80 & tender specifications.. Providing

and erecting Pipe type earthing with

40 mm dia 2.5 mtr long 'B' grade G.I.

pipe with necessary coupling buch

buried in specially prepared earth pit

& G.I. earth wire of 8 SWG erected &

connected as directed (For panel)

For using salt and charcoal / coke as

B required for pipe type earthing. 12 Nos 170.00

Supplying & erecting funnel type

earthing having earth plate of

following size burred in specifically

prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt

with alternate layers of charcoal &

salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering &

bricks masonry block, C.I. Cover

complete as per para 7.3 of IS

with necessary length of double

Galvanised Iron / copper earth wire

No 6 SWG bolted with lug to the plate

and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to

the nearest switch gear with end

socket as per direction & duly tested

by earth tester confirming to IS (As

per drawing) with following

(C) with 60 x 60x 0.315 cms. Copper

Providing and erecting HOT deep

D Galvanised iron strip wire 8 to 16 150 Kg 77.00

Providing and erecting required size

Copper strip for earthing of H.T. OCB /

E ACB/ Transformer, LT panel 60 Kg 787.00

board, Motors etc. using copper

Point wiring for Light / Fan/ Bell/

Primary Point with 2-1.5 sq. mm &

earth wire of 1.5 sq. mm (green) both

are of ISI marked 1.1 kv grade FRLS

PVC insulated multi strand copper

wires upto max length of 10 mt, in

below type of pipe erected with 6A

Tissino Type ISI marked flush type

63(A switch / bell push and accessories

) erected on Metal / PVC/Wooden Box

covered with 3 mm thick

PC(Polycarbonate)

/Acrylic/Laminated sheet. with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe

and accessories erected flushed on

wall/ceiling complete

Point wiring for independent PLUG

with following size mains earth wire

of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires

upto 10 mt length, in following below

of pipe erected complete with ISI

marked 3 / 5 Pin socket and tissino

type switch erected with earth

B continuity connection erected on 4 Pt 489.00

Metal / PVC/Wooden box covered

with 3 mm thick PC(Polycarbonate) /

Acrylic/Laminated sheet.

[B] 6/16A Plug and 16 amp switch

with 2-2.5 sq. mm Cu. Mains from mcb

(a) with medium class Rigid PVC pipe

and accessories erected flushed on

wall/ceiling complete

Supplying and erecting LED indoor

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion

resistance with diffuser with company

mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

C Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may

select any wattage capacity between the

(A) Tube Light with integral driver

(v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet(Cat III)

Supplying and erecting LED street

light / Flood light fittings with High

power White LEDs wattage of 3 Watt

and above assembled on single

MCPCB, efficiency more than

lm/w and corrosion free High

pressure die cast aluminium housing

with smooth finish powder coated and

heat sink extruded aluminium with

diffuser and Polycarbonate optics/

lenses with company mark/name

engraved or embossed 160 to

V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt

. LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80

certificates)(NOTE: Below description

have shown ranges of Wattage

capacity of LED fittings.The Engineer

incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light

must have 440VAC line supply with

over-voltage protection.

(iii) above 24 to 36 watts(Cat-lll)

Supplying & erecting Steel tubular

pole (Swaged) confirming to IS -

(Part-II) 1980. Manufacturing process

of steel tubular pole should be as per

IS specification. Basic steel tube

should be ISI Marked. Pole should be

painted by one coat of Zinc comet

Primer and two coat of Aluminium

/approved paint to be erected on / in

existing Foundation. The length of

poles are as below.

(A) 7.5 mtr. Long Swaged Steel tubular

pole.(i) pole as per IS code 410-SP-4

with 300 X 300 X 4 mm base plate with

necessary G.I. J Bolts (Approximate

Pole weight 67 Kg) For burial erection

Providing & erecting Approved make

Ceiling Fan with double ball bearing

ISI mark with Condenser 230 volt

A.C.50 Hz 1200 mm sweep complete

F having 3 blades aluminium body and 2 Nos 2289.00

blade sets having ornamental design

shanks , canopy erected with

earthing. [ Make shall be approved by

Engineer in Charge]

Supplying & erecting single phase

approved make industrial exhaust fan

suitable for medium duty ring

G mounted low noise operation suitable 6 Nos 3306.00

for medium duty having following dia

size and maximum speed in RPM

[D] 450 mm dia 900 RPM (Cat-lll)

Providing and fixing printed

instruction chart both in English and

64(A Gujarati and duly framed with front

) glasses, for treatment of person

suffering from Electric shock with

minimum 50" diagonally size.

Providing pair of rubber hand gloves

B suitable for working on 11 KV/22 KV 2 SET 212.00

Supplying rubber matting of following

C 12 mm thickness as per IS:15652/IEC 12 3051.00

Supplying stand first AID box with

antiseptic cream, medicine for use on

wounds due burn, crepe bandage,

gauge bandage, medicated ready to

use bandage (Band-aid) adhesive tape

for medicinal user, Scissors, anti-

septic solution (Savlon or similar) etc.

(All above contents shall be of

standard makes)

Supplying FIRE bucket round bottom

of 9 litres capacity made out of

gauge G.I. sheet with extra handle at

E bottom duly painted white inside and 3 NOS 212.00

Red out side with FIRE mark, filled

with dry-sand and kept on existing

stand provided or hung on wall hook.

Supplying & erecting carbon dioxide

(CO2) fire extinguisher user of

following capacity with necessary

F clamps made from 50 x 6 mm M.S. Flat 1 NOS 8586.00

with nut & bolts grouted in wall

complete.[B] For 5.5 / 6.5 KG Capacity

Design, Supply, Installation, Testing,

Commissioning of Diaphragm sealed

Pressure Gauge, ±1% accuracy, Direct

bottom 1/2" NPT (M) process

connection, IP 67, Glycerine filled,

SS304 Case with Bayonet Type Bezel,

65 SS316 L Diaphragm, SS316 Bottom 2 Nos 3012.00

Housing Material, SS 316 Movement

material, Aluminium dial with black

graduation on white background,

Micro Zero adjustable pointer,

neoprene gasket, Blow out disc,

shatter proof glass, SS tag plate etc as

per IS 3624..0 to 6 Kg/cm2 (150 mm

Design, Supply, Installation, Testing,

Commissioning of Full Bore

Electromagnetic flow meter with

factory calibrated, Regular Power

Operated, flanged connection, Flow

sensor, Indicator, transmitter and

totaliser with all accessories viz.surge

arrestor, associated cables, cabinets,

hardwares, etc complete as per

following specifications:

Flow Meter/ Sensor:DC pulsed type,

IP 68 Protection, Flanged process

connection as per IS 1538 or

equivalent standard, SS304/ Metallic

Alloy Flow Tube, SS316/ SS 316 L/

Hastelloy Sensor, SS316/ Hastelloy

Grounding Ring/ Inbuilt Grounding

Electrode, Neoprene/ Polyurethane/

Hard Rubber/ Rilsan lining, SS304/

66 Die Cast Aluminium/ Carbon steel 4 Nos 82972.00

with Anticorrosive Paint Coil Housing

with Junction Box, CS flanges.

Flow Transmitter/ Converter (

Mounted):Microprocessor based,

Modular design, 2 line LCD for

indication of actual flow rate, forward,

reverse, sum totaliser display, ±0.5%

accuracy at 0.3 to 4 m/sec velocity,

to 20 mA with HART/Modbus output,

one scalable pulse, one status output,

IP 67 protection, Die cast aluminium/

polycarbonate/ SS316 with

Anticorrosive Paint/ PU finish with

glass window enclosure, Inbuilt

EEPROM and Data Logger, 20 meters

cable length for sensor to transmitter

communication etcalongwith wall

mounted/ stand mounted cabinet.

Ultrasonic Type Level Transmitter

with Remote Display :Design, Supply,

Installation, Testing and

Commissioning of NOn Contact

Ultrasonic Type Level Transmitter

with Remote Display.Sensor:The

sensor should be non contact type,

field mounting type, housing shall

have minimum IP65 protection, PP/

PVC Sensor MOC, with sensor to

transmitter cable. Remote Indicator

cum Transmitter: Microprocessor

based indicator with LED / LCD digital

display, panel/ wall mounting type,

power supply shall be 110-240 Vac or

15 to 36 Vdc, 50 Hz ±

%.Accessories: Mounting bracket, nut,

bolts etc as per system requirement

and Hook up diagram of the

Instruments. Level Transmitter shall

be suitable for following Range..0 to

Design, manufacture, supply,

installation, testing and

commissioning of indoor type PLC

panel with 10" HMI and necessary

hardware, fabricated out of min. 2 mm

thick CRCA sheet complete with latest

configuration PC, necessary

programming for SCADA software and

comprising of all accessories. The

I/O's with minimum of 20% spare

with respect to the specification as

directed by Officers

Cable and accessories: -Supply, laying,

testing & commissioning Overall

69 Shileded Armoured Cable, stranded

CU conductor with all accessories as

as directed by Officer.

A 1 PAIR X 1.5 SQ MM CU 30 Mtr 211.20

B 2 PAIR X 1.5 SQ MM CU 40 Mtr 342.10

C 4 PAIR X 1.5 SQ MM CU 40 Mtr 574.20

Operation & Maintenance of Lift Irrigation Scheme with Civil, Mechanical and Electric

Maintenance including formation and Registration of cooperative society of beneficiaries

70 and handing over charge to the Registered society after Completion of O&M period etc.

Completed for 5 years. (Refer detailed item specification for scope of work and year wise

release of payment on achieving specified targets. (5 Year per Year 3% )

Total Project Cost

I/We am/are willing to carry out the work at ...................... % above/below percent

be written in figures and words) of the estimated rate mentioned above. Amount of

my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification

and reference to book of In In

specifications) figures Words

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure) ………………………………

(C)Net Tendered Amount (A-B) (in figure) ………………………………

1 The Contractor shall exhibit a board with brief details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R. NO.: MIS102010/17/K1 Dated:30/07/2018 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of

cement consumption have been deducted from the rate of original item at the rate of

input rate mentioned in all the tender.