SUPPLYING OF SUBMERSIBLE MOTER, STARTER, CABLE, DRILLING OF BORE WELL FOR NEW BORE WELL, CLEANING OF OPEN TUBE WELL AND EXISTING TANKI ALSO SUPPLY OF DRINKING WATER FOR WATER DEPARTMENT OF OKHA MUNICIPALITY UNDER FIFTEENTH FINANCE COMMISSION 2020-2021

SUPPLYING OF SUBMERSIBLE MOTER , STARTER , CABLE, DRILLING OF BORE WELL FOR NEW BORE WELL, CLEANING OF OPEN TUBE WELL AND EXISTING

TANKI ALSO SUPPLY OF DRINKING WATER FOR WATER DEPARTMENT OF OKHA MUNICIPALITY UNDER FIFTEENTH FINANCE COMMISSION 2020-2021

TENDER Approved Rate for Net Amount

ITEM NO. Sr. No. Description of Item Size Unit the Year 2022-23

(Exclusive of GST)

Item No. Item No. 1: Drilling of tube well by direct / reverse rotary rig in alluvial strata

01 Drilling of pilot bore hole in alluvial strata by direct / As per attached -

reverse rotary rig. Annexure-A

Reaming of 250/300 mm dia. pilot bore hole including -

1.2 assembling, lowering housing casing, strainer pipes, 400 mm RMT

gravel packing, clay packing etc. As per attached

450 mm RMT Annexure-A -

Drilling of bore hole by Mini DR rig including lowering of

pipe assembly, gravel packing, clay packing and

1.3 Zone - I RMT

development of bore hole by washing. (For installation of

Hand pump / Power pump)

300 mm Zone - II 663

300 mm Zone - III &

Lowering and removing of 100 mm dia drop line and

mm dia airline for development of each water bearing

zone come across up to full depth of tube well of size

As per attached

1.4 / 250 / 300 mm dia. for tube well having depth 186 meter Job LS -

and above through suitable air compressor. The job is for

complete period of development of tube well. (Without

charges for air compressor)

1.4.1 Lowering and removing of 100 mm dia drop line and 32 Job RMT As per attached

mm dia airline for development of each water bearing Annexure-A

zone come across up to the full depth of deep tube well

of size 200 / 250 / 300 mm dia. for the tube well up to

185-meter depth through suitable air compressor. The -

job is for compete period of development. (where water

is very deep and 2/3rd submersion is not achieved.) All

the required accessories, machineries etc for above job

will have to be provided by contractors.

Cement grouting / sealing without cost of cement by As per attached -

means of mud pump. Annexure-A

Item No. 2: Zone I: Drilling of bore hole by DTH rig -

As per attached

Drilling of 2.1 (a) 0 to 100 mtr depth 165 mm RMT

bore well by (b) 100 to 150 mtr depth

DTH ring As per attached -

2.2 Zone II: Drilling of bore hole by DTH Rig 165 mm RMT

Drilling of Drilling of 165 mm dia. bore well by DTH rig in rocky

165 mm dia 2.3 formation in all districts of Zone III (Except Surendra RMT 236

DTH bore Nagar District.)From 0 to 150 meters depth

well for Zone 2.3.1 From 151 to 225 meters depth RMT 292

III Rajkot and 2.3.2 From 226 to 300 meters depth RMT 316

Zone V Drilling of 165 mm dia. Bore well by DTH rig in sandstone

Junagadh 2.4 formation in Morbi, Tankara & Wakaner talukas of Rajkot RMT 225

district. From 0 to 150 meters depth

2.4.1 From 151 to 225 meters depth RMT 278

Drilling of 165 mm dia. x 120m deep bore well by DTH rig

in clay formation in all talukas of Zone III.

Drilling of 165 mm dia. x 120m deep bore well by DTH rig

in soft/hard rock formation in Wadhavan, Halvad, Muli,

Patdi, Dhrangadhra, Lakhtar, Limdi & Chuda talukas of

Surendranagar District.

Drilling of 165 mm dia. x 225m deep bore well by DTH rig

2.7 in soft/hard rock formation in Sayla & Chotila talukas of RMT 259

Surendranagar District.

Drilling of 200/215 mm dia. bore well in over burden 200 /

rocky or loose collapsible/ boulder strata & lowering of

175/200 mm dia. UPVC/PVC/ERW casing pipe above 12m mm

to 40m depth by DTH rig etc. complete

Drilling of bore well by DTH rig in rocky formation in all As per attached -

talukas of Zone II. Annexure-B3

Drilling of bore well by DTH rig in rocky formation in all

talukas of all districts of Zone III. Up to 350mtr.

Drilling of bore well by DTH rig in sand stone formation in

all talukas of Zone - III (Except Surendranagar district).

Drilling of bore well by DTH rig in soft / hard rock area in

3.4 all talukas of Surendranagar district & Halvad taluka of 200 mm RMT 506

Morbi district.

Drilling of 250 mm dia. bore well in all strata including

dual over burden strata by Combination DR / DTH rig

3.5 including lowering 200 mm dia MS ERW pipes in bore RMT 1258

hole as suggested by Hydrologist (Except Surendranagar

Drilling of min. 325 mm dia. bore hole in all strata

Item No. 3 including dual over burden strata by Combination DR /

3.6 DTH rig including lowering 250 mm dia MS ERW pipes in RMT 1481

bore hole as suggested by Hydrologist. (Except

Surendranagar district)

Drilling of 450 mm dia. bore well in alluvial, boulder etc.

all strata including lowering of pipe assembly, bottom

sealing, gravel packing, clay packing, development of

3.7 bore well by washing and air compressor and further RMT 1599

drilling of 165 mm dia. bore hole in rocky strata etc.

complete by DR & DTH rig as suggested by Hydrologist in

Drilling of 250 mm dia. DTH bore hole in soft rock (sand

3.8 stone formation) for all districts & talukas of Saurashtra 250 mm RMT 475

having sand stone formation.

Drilling of DTH bore hole in rocky formation for all

districts & talukas of Kutch.

3.9.1 Soft rock 250 mm RMT 618

3.9.2 Hard rock 200 mm RMT 618

3.9.3 Hard rock 250 mm RMT 693

Drilling of different dia. bore well by DTH / Combination

rig in all districts under Zone V Junagadh.

Drilling of 200 / 215 mm dia. bore hole in overburden

strata by DTH rig up to required depth including fixing of

175 / 180 dia MS ERW / PVC casing pipe & further drilling

of 165 mm dia. bore hole in hard rock (trap etc.) strata by

DTH drilling method up to total depth of 300 meters

including measuring the yield by V notch and flushing of

bore etc. complete in all districts of Zone V.(Casing up to

3.10.A-1 From 0 to 150 meters depth (215) / RMT 264

3.10.A-2 From 151 to 225 meters depth RMT 327

3.10.A-3 From 226 to 300 meters depth RMT 354

Drilling of 200 / 215 mm dia. bore hole in overburden

strata by DTH rig up to required depth including fixing of

175 / 180 dia MS ERW / PVC casing pipes & further

drilling of 165 mm dia. bore hole in hard rock (trap etc.)

strata by DTH drilling method up to total depth of

meters including measuring the yield by V notch and

flushing of bore etc. complete in all districts of Zone

V.(Casing up to 12 Mts.). In case of lowering of casing

more than 12 mtr. and up to require depth the rate will

be considered as per item no-3.10-B-1 otherwise less

than 12 mtr. Casing it will be considered as per item no-

3.10.B-1 From 0 to 60 meters depth 165 mm RMT 414

3.10.B-2 From 61 to 150 meters depth RMT 264

3.10.B-3 From 151 to 225 meters depth RMT 327

3.10.B-4 From 226 to 300 meters depth RMT 354

3.10.C Drilling of 300 / 315 mm dia. bore in over burden strata 200 mm

including lowering of 204 mm dia UPVC / 225 / 250 mm

dia. PVC / MS ERW casing pipes up to required depth and

further drilling of 200 mm dia. bore hole in all types of

Rocky Strata, soft rock & hard rock strata formation by

DTH rig including flushing of bore hole by air compressor

and measuring of yield of bore by V notch and fixing of

bore cap etc.complete.

(Oer burden up to 12 mtr.)

3.10.C-1 From 0 to 350 meters depth RMT 544

3.10.C-2 From 351 to 400 meters depth RMT 962

3.10.C-3 From 401 to 450 meters depth RMT 1157

3.10.C-4 From 451 to 500 meters depth RMT 1510

Drilling of 300 / 315 mm dia. bore in all strata including

dual over burden strata by combination DR/DTH rig

including lowering of 204 mm dia UPVC / 225 / 250 mm

dia. PVC / MS ERW casing pipes up to required depth and

further drilling of 200 mm dia. bore hole in all types of

3.10.D Alluvial Rocky strata formation by DTH rig including 200 mm

flushing of bore hole by air compressor and measuring of

yield of bore by V notch and fixing of bore cap etc.

complete.Rates for item no-3.10-E-1 are applicable more

than 12 mtr. Casing only, otherwise less than 12 mtr.

Casing it will be considered as per item no-3.10-E-2.

3.10.D-1 From 0 to 120 meters depth (alluvial strata) RMT 1409

3.10.D-2 From 121 to 350 meters depth RMT 544

Drilling of 215 mm dia. bore hole in overburden strata

(alternate layers of lime stone & yellow sticky clay

formation) by DTH rig up to required depth (approx. up

to 70 meters) including fixing of 175 / 180 mm dia. MS

ERW / PVC pipes (blank and slotted) & if required further

drilling of 165 mm dia. bore hole in hard rock (trap etc.)

strata by DTH drilling method up to total depth of

mtr. Including measuring the yield by V notch and

flushing of bore etc. complete. in coastal areas of

Item No. 4 Drilling of 115 mm dia. DTH bore well by In well ring in

hilly areas of all districts.

Item No. 5 (A) For Own Dept.

Works: For Kutch

District: Rs. 15000/-

per LS Job and For

Other Districts: Rs.

12000/- per LS Job

Electro logging charges (With carting) - Job (B) For Other Dept. -

and Private Works:

For Kutch District:

Rs. 21000/- per LS

Job and For Other

Districts: Rs. 18000/-

Item No. 6: Compressor test of tube well by air compressor of

Air CFM / 100 PSI capacity in all districts. –Hour

Compressor Compressor test of tube well by air compressor of

CFM / 150 PSI capacity in all districts. –Hour

Compressor test of tube well by air compressor of

CFM / 200 PSI capacity in all districts. –Hour

Compressor test of tube well by air compressor of

CFM / 300 PSI capacity in all districts.–Hour

Item No. 7: For

Pump Test initial

Conducting pumping test of 150 / 200 / 250 mm dia. DTH with sub

bore well by submersible pump of adequate capacity pump

including providing all required tools / tackles etc. for all up to

1st 24 hours. (up to 30 HP) - LS Job 29134.00

There after Rs./ Hr. - Hour 964.00

1st 24 hours. (31 to 70 HP) - LS Job 36607.00

There after Rs. Per Hr. - Hour 1286.00

1st 24 hours. (More than 70 HP) - LS Job 45830.00

There after Rs./ Hr. - Hour 1623.00

Item No. 8: Hydro-fracturing

Hydro fracturing of 115 mm dia. low discharge existing

DTH Bore well at different depth as per geology

(Maximum up to 90.00 meters) with single packer unit by

8.1 high pressure water jetting pump for duration of 115 mm LS Job 10179.00

minimum 15 minutes and flushing of bore including

measuring yield by hand pump or single phase

submersible pump set.

Hydro fracturing of 165 mm dia. low discharge existing

DTH Bore well at different depth as per geology

(Maximum up to 120.00 meters) with single packer unit

8.2 165 mm LS Job 15107

by high pressure water jetting pump for duration of

minimum 15 minutes including pre and post fracture

pump testing by submersible pump set.

Item No. 9: Geo-hydrological Ground Water Investigation

Geohydrological ground water investigation including

vehicle charges.

(a) Bore well for single phase / hand pump - Per No. 3571

(b) For three phase DTH bore / DR tube well including

- Per No. 14286

water sample testing charges

(C) For open well including water sample testing charges - Per No. 14286

Geophysical & geohydrological ground water

9.2 investigation for finalization of one pin point including - Per No. 14286

vehicle charges.

Item No.10 Charges for attending existing bore well and taking

necessary measurement & giving opinion for depth and

filling materials and cleaning of bore well with

necessary tools and tackels. (Without lifting & lowering

Minimum charge within 50 KM LS Job 2679

From 51 KM to 100 KM LS Job 3571

Cleaning of bore hole by sand barrel system including

removing foreign materials, sand, clay, pebbles etc. with - RMT 161

necessary tools, plants and accessories.

Item No.11 Bore Blasting: Bore blasting of 165 mm dia. DTH bore up

to required depth from 15 meters to 25 meters of

required no. of bores (5 to 6 Nos.) by using required LS Job

quantity of slurry explosive class II required blast material (For two

such as detonator blasting cap, fuse, wire including well blasts per

equipment, safety device etc. complete (for two blasts bore)

Item No.12 Supply of clay ball of size ranging from 25 mm to 50 mm -

As per attached

12 made from stickly clay at site of work as certified by - Cmt

Item No.13 Supply of best quality well sorted Sevaliya gravel of size As per attached -

ranging from 4 mm to 6mm. Annexure-A

Item No.14 As per attached -

14 Supply of ordinary Portland cement of grade 53. - Mt

SECTION 9-6 SUBMERSIBLE PUMPS

Item No.15 S.I.T.C. of single-phase submersible pump set suitable for

100 mm size or more dia bore well having motor capacity

and discharge as under with necessary panel box. Lifting

and Lowering taken extra.

(a) Motor rating 1 HP (12 stage) pump having capacity of

50 LPM at 43 to 45 mtr head suitable for 32 mm dia.

(b) Motor rating 1.5 HP (16 stage) pump having capacity

of 50 LPM at 60 mtr head suitable for 32 mm dia. delivery

(c) Motor rating 2 HP (17 stage) pump having capacity of

106 LPM at 40 mtr head suitable for 32 mm dia. delivery

Note:- Add or less Rs. 450/- for Additional / Less Stage

S.I.T.C. submersible pump set suitable for bore of

mm. dia. or more having three phase motor capacity not

more than 3 H.P. of different range with following

capacity. Lifting and Lowering taken extra.

(A) (20 stage) 170 to 185 LPM discharge at 57 to 48 mtrs.

Respectively head suitable for 50 mm dia. delivery pipe

Cat. III Ea. 20695.00 0.00

(B) (15 stages) 130 LPM discharge at 50 mtrs.

Respectively head suitable for 50 mm dia. delivery pipe

Cat. III Ea. 20026.00 0.00

(C) (12 stages) 130 LPM discharge at 54 mtrs.

Respectively head suitable for 50 mm dia. delivery pipe

Cat. III Ea. 19017.00 0.00

Note:- Add or less Rs. 500/- for Additional / Less Stage

S.I.T.C. submersible pump set suitable for bore of

mm. dia. or more having three phase motor capacity not

more than 5 H.P. with following capacity. Lifting and

Lowering taken extra.

(A) (25 stage) 120 to 125 LPM discharge at 155 to

mtrs. head respectively suitable for 50 mm dia. delivery

Cat. III Ea. 26628.00 0.00

(B) (16 stage) 140 to 180 LPM discharge at 96 to 69 mtrs.

head respectively suitable for 50mm dia. delivery pipe

Cat. III Ea. 22153.00 0.00

Note: - Add or less Rs. 550/- for Additional / Less Stage

S.I.T.C. submersible pump set suitable for bore of

mm. dia. or more is having three phase motor capacity

not more than 5 H.P. with following capacity. Lifting and

Lowering taken extra.

(A) (8 stage) 240 to 200 LPM discharge at 70 to 78 mtrs.

head respectively suitable for 50mm dia. delivery pipe

Cat. III Ea. 33000.00 0.00

(B) ( 5 stage) 410 to 350 LPM discharge at 40 to 36 mtrs.

head respectively suitable for 50mm dia. delivery pipe

Cat. III Ea. 32106.00 0.00

Note:- Add or less Rs. 600/- for Additional / Less Stage

S.I.T.C. submersible pump set suitable for bore of

mm. dia. or more is having three phase motor capacity

not more than 7.5 H.P. with following capacity. Lifting

and Lowering taken extra.

(A) (12 stage) 280 to 240 LPM discharge at 90 to

mtrs. head respectively suitable for 50mm dia. delivery

Cat. III Ea. 35238.00 0.00

(B) (8 stage) 390 to 350 LPM discharge at 62 to 70 mtrs.

head respectively suitable for 50 mm dia. delivery pipe

Cat. III Ea. 33225.00 0.00

Note:- Add or less Rs. 650/- for Additional / Less Stage

Okha Nagar Palika Area Existing Danki repairing Work

Item No. 16 including Boring casing with 150 mm dia Supply Pipe ISI

Mark 110 mm With Handle Up to Complited (Up To

Okha Nagar Palika Area Existing Open Well Cleaning

Item No.17 Work including Transportation of Cleaning Material Bring

Out from Open Well up 3.00 KM (Up To 3.00 MT to

MT Diameter Depth up to 15.00 MT)

Supplying Of Drinking Water to Okha Nagar Palika Area

Like Okha, Arambhada,Surajkardi and Bet Dwarka by

Item No.18 Water tanker from Out Sources like Open Well or Talav

nearest to Okha Nagar Area which Water testing by

Qualified Laboratory Approved by Government of

Gujarat.(Rate Per 1000.00 lits)

Approximate Tender Amount Will Be Rs/- 31,50,000/-

Other Rates Are Shown In As per attached Annexure-A And As per attached Annexure-B