SPECIAL REPAIR OF BATHROOM AND TOILET BLOCK OF BUILDING NUMBER P-298, P-299 AND P-300 (GROUND FLOOR ONLY ) INCL REPAIR TO CONNECTED SEWAGE LINE AT MIL STN JAMNAGAR

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed by Engr-in-Charge

M&L 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engr-in-Charge

Moulding to Granite(single or double) slab including rounding off edges for 20 mm thick slabs including grinding and polishing complete all as specified and as directed by Engr-in-Charge

S&F Non-skid ceramic coloured tiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floor &skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thck screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge

M&L Glazed ceramic coloured designer tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 0ver 10mm thick plaster in cement mortar (1:3). complete all as specified and as directed by Engr-in-Charge

M&L for Machine cut kota stone slab 20-25 mm thick in riser of step ,skirting, dado,vertical partition and pillar laid over cement screed etc, piece machine polished laid over and jointed in cement slurry and pointed in grey cement and pigment to match the colour of slab,10mm thick rendering as in backing coat for skirting/dado in CM (1:3) with on wall surfaces complete all as specified and as directed by Engr-in-Charge

Demolition of brick work/stone masonry built in cement mortar of any description complete all as specified and as directed by Engr-in-Charge

M&L for old size brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed as in repairs.complete all as specified and as directed by Engr-in-Charge

Taking down Doors chowkat or frame n exc 1.5 Sqm but with shutters (without taking off shutters from the frames) and removing out of site complete all as specified and as directed by Engr-in-Charge

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm complete all as specified and as directed by Engr-in-Charge

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed by Engr-in-Charge

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by Engr-in-Charge

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed 150mm complete all as specified and as directed by Engr-in-Charge

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250 mm long complete all as specified and as directed by Engr-in-Charge

S&F in Aluminium handles, cast type, anodised 150mm long complete all as specified and as directed by Engr-in-Charge

S & F 100mm Butt hinges, extruded aluminiumalloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed by Engr-in-Charge

Dismantling exc 500 and n exc 1000 ltr water tank removing to store complete all as specified and as directed by Engr-in-Charge

S&F 1000ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm ball/float valve complete all as specified and as directed by Engr-in-Charge

Taking down steel tubing and connections including cleaning for refixing or removal to store of 15 mm dia. complete all as specified and as directed by Engr-in-Charge

Taking down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engr-in-Charge

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape complete to walls and ceilings or laid in floors including all connected brass cpvc fittings and cutting grooves, filled with CM1:6 complete all as specified and as directed by Engr-in-Charge

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape in any requirement complete to walls and ceilings or laid in floors iincluding all connected brass cpvc fittings and cutting grooves, filled with CM1:6 complete all as specified and as directed by Engr-in-Charge

Demolition of cement concrete (un-reinforced) in any position not otherwise specifically provided complete all as specified and as directed by Engr-in-Charge

M&L 75 mm thick Cement concrete type C-2, 1:3:6 (40 mm graded aggregate) as in plinth protection complete all as specified and as directed by Engr-in-Charge

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A complete all as specified and as directed by Engr-in-Charge

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key,scrubbing down with water to receive plaster including necessary all scaffolding complete all as specified and as directed by Engr-in-Charge

M&L for rendering 10mm thick on fair faces of brick/stone work or concrete surfaces in CM 1:6 finishing the surface even and even smooth without using extra cement. complete all as specified and as directed by Engr-in-Charge

M&L 15 mm thick rendering in in two layers 5mm thick inCM 1:4,over 10mm thick cement plaster in CM 1:6 on fair face of brick work/Stone or concrete surface to be finished even and smooth without using extra cement Including WPC compound 3% by weight of cement.(Note :a) Intergial WPC Compound shall be used in sencond layer,b) Intergial WPC shall be paid seperately on supply only complete all as specified and as directed by Engr-in-Charge.

Supply only liquid waterproofing compound complete all as specified and as directed by Engr-in-Charge

M&L for rendering 5 mm thick in CM 1:3 on ceiling to be finished complete all as directed by Engr-In-Charge

M&L for preparation of new plastered surface of wall and applying two coat of oil bond distemper and 3 mm putty complete all as specified and as directed by Engr-in-Charge

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash. complete all as specified and as directed by Engr-in-Charge

M&L preparation of newly plastered surfaces of walls for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed by Engr-in-Charge

Material and labour for complete removal of existing treatment from plastered or unplastered surfaces of walls including cleaning with scrapers, any number of coats and any width or girth etc, the area of application should be cleaned thoroughly, remove all dirt, dust and uneven elements from the surface by washing and scraping and all the unevenness in the surface should be corrected by filling the exterior wallcare putty, surface should be sanded down with fine grade sand paper for smoothness and applying one coat of exterior primer and 02 coats of Exterior Weather Coat Emulsion Paint of white or tinted shade(any colour) as per manufacturer instruction complete all as specified and as directed by Engr-in-Charge

S&F in repairs counter sunk Vitreous china wash basin (560x410x180mm) white including mounting on granite slab 20mm thick brass chromium plated perforated waste coupling /fittings 32mm dia with long screwed shanks and fly nut, flangeebd bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and suitable length complete all as specified and as directed by Engr-in-Charge

S&F in repairs vitreous china urinals,flat back of size 465mmX355mmX 265mm, Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe.white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and as directed by Engr-in-Charge

S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors.complete all as specified and as directed by Engr-in-Charge

S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints fixed to walls. complete all as specified and as directed by Engr-in-Charge

S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors.complete all as specified and as directed by Engr-in-Charge

S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-Charge

S&F in repairs 110mm PVC (SWR) single T equal or unequal complete all as specified and as directed by Engr-in-Charge

S&F in repairs PVC(SWR) bend any radius, 110 mm dia.complete all as specified and as directed by Engr-in-Charge

S&F in repairs PVC(SWR) bend any radius, 75 mm dia. complete all as specified and as directed by Engr-in-Charge

S&F in repairs PVC(SWR) Tee any radius, 75 mm dia. complete all as specified and as directed by Engr-in-Charge

S&F in repairs 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed by Engr-in-Charge

S&F in repairs 110mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed by Engr-in-Charge

S&F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent. complete all as specified and as directed by Engr-in-Charge

S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and as directed by Engr-in-Charge

S&F in repairs 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed by Engr-in-Charge

S&F fancy type CP bib taps, 15 mm bore with crutch or , screwed down, fixed as in repairs. complete all as specified and as directed by Engr-in-Charge

S&F in repairs Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe/cpvc pipe and fixed. complete all as specified and as directed by Engr-in-Charge

S&F in repairs stop valve chromium plated with l 15 mm dia screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engr-in-Charge

S&F in repairs Brass CP three way wall Mixer for mixing hot & Cold water screwed down for iron pipe and fixed.complete all as specified and as directed by Engr-in-Charge

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, including CI 'P' or 'S' trap, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish with and includingand PVC flushing pipe, 32 mm dia complete all as specified and as directed by Engr-in-Charge

S&F Waste fittings,32mm brass , chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engr-in-Charge

S&F in repairs 32 mm bore PVC waste pipe with fittings of approved complete all as specified and as directed by Engr-in-Charge

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engr-in-Charge

S&F 15 mm bore Chromium plated shower roses with or without swivel joints, any size, including fixing to steel/cpvc pipe or union in repairs complete all as specified and as directed by Engr-in-Charge

S&F Tubular towel rail, brass CP 20mm dia, D type, 60cm long between flanges in repairs complete all as specified and as directed by Engr-in-Charge

S/F in repairs PVC valveless syphonic action type ,flushing cistern Low level white,with,with inlet ball valve ,float and handle 10 Ltr capacity including brackets. complete all as specified and as directed by Engr-in-Charge

Removal of all loose/unsound/bad/damaged concrete or plaster existing RCC structure of slab/beams/walls/chajja by using chesel/hammar .Cut and remove unsound reinforcement bars, wires etc without damaging the sound reinforcement . clean loose rust from bars manually with brush . fixing new supplymentary bars if required,either by tying it with existing bars or by welding on it. Applying eppoxy bonding agent and making good with polymer modified plaster/micro concrete as required thickness over a coat of rust removing alkaline primer and match the finishing to the existing surface in ground floor including formwork complete all as specified and as directed by Engr-in-Charge

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and as directed by Engr-in-Charge

Removing excavated materials to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m from starting point. complete all as specified and as directed by Engr-in-Charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and as directed by Engr-in-Charge

Demolition and breaking up sewage drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar (Internal dia of pipe in 200 mm) complete all as specified and as directed by the Engineer-in-Charge.

S&F DWCPE (SN8) pipes, nominal dia 200 mm laid in trenches for sewer network, fixed and jointed with integral socket or coupler and EPDM sealing ring (depending on pipe ends) as per manufacturer instructions complete all as specified and as directed by Engr-in-Charge (Make (DWCPE Pipe) : Supreme, Prince, Berlia or equivalent as specified)

S&F DWCPE (SN8) pipes, nominal dia 300 mm laid in trenches for sewer network, fixed and jointed with integral socket or coupler and EPDM sealing ring (depending on pipe ends) as per manufacturer instructions complete all as specified and as directed by Engr-in-Charge (Make (DWCPE Pipe) : Supreme, Prince, Berlia or equivalent as specified)

M&L for cement concrete bedding and haunching against the sides of pipes after they are laid to 300 mm bore drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) laid to falls including packing under, and tested, complete all as specified and directed. NOTE :- Pipe shall be measured and paid separately).as in repairs.

M&L for cement concrete bedding and haunching against the sides of pipes after they are laid to 200 mm bore drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) laid to falls including packing under, and tested, complete all as specified and directed. NOTE :- Pipe shall be measured and paid separately).as in repairs.

Demolition for reinforcement cement concrete complete all as specified and as directed complete all as specified and as directed by Engr-in-Charge

M&L for precast RCC 1:2:4 type B1 using 20mm graded stone aggregate in cover slabs including necessary form work etc for manholes covers set in CM 1:4 (reinforcement measured seperately) complete all as specified and as directed by Engr-in-Charge

M&L for TMT bars 6 to 8mm dia and over cut to length bent to shape required including bending and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and as directed by Engr-in-Charge

S&F in powder coated aluminium fixed louvered ventilator, frame of section 63.5mm X 38.1mm X 1.01 mm or appropriate equivalent section with 4 mm thick figured/frosted sheet glass with rubber gasket,Aluminium wire mesh, handles, locking arrangement etc incl making good jambs, cills etc and including taking down old iron ventilator complete all as specified and directed by the Engr-in-Charge.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and as directed by Engr-in-Charge

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and as directed by Engr-in-Charge

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and as directed by Engr-in-Charge

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) exhaust fan point controlled by one, one way switch 5 Amps

(c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

Description all as per item No 81 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (power point) complete all as specified and as directed by Engr-in-Charge

Description all as per item No 4 here in before but using 4.0 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 15 amps switch socket cobmination point including necessary running of 4.0 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (geyser point) complete all as specified and as directed by Engr-in-Charge

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and,cutting chases for concealed water,tubing or concealed conduit wiring,,etc., and making good, cutting not,exc 10 cm girth ®(stone massonary) complete all as specified and as directed by Engr-in-Charge

S & F for modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified and as directed by Engr-in-Charge

S & F for modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and as directed by Engr-in-Charge

S & F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and as directed by Engr-in-Charge

S & F for modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and as directed by Engr-in-Charge

S & F for ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and as directed by Engr-in-Charge

S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed by Engr-in-Charge

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed by Engr-in-Charge

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed by Engr-in-Charge

S & F for MCB Single pole and neutral rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed by Engr-in-Charge

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. complete all as specified and as directed by Engr-in-Charge

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :- Bajaj Cat No BIBWP 10W LED or its equvalent in Philips, Wipro.

S & F for LED tube light fitting 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and as directed.

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equvalent in Philips, Wipro.

S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Quick Building Service (BID ID -3382675)

badri glass and construction (BID ID -3375629)

M/S Badri Electicals (BID ID -3382846)

ABR Trading Co (BID ID -3381005)

sanu enterprise (BID ID -3382259)

M/S JAYCONSTRUCTION CO (BID ID -3382604)