Const. of CHC along with residential accommodation at Village Ambli (Ambala) (Pdg. Fire Alarm System).

[23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. [Through Rate]

SITC of 2 loop Microprocessor based 2 wire fault tolerant, networkable type Fire Alarm Detection Control Panel (having nos, of required loops to sun minimum 20% extra over the nos of fire detectors. The panel shall be able to give location of all fire fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON/OFF respective control module whenever any alarm is triggered. The panel shall have rectifier, loop cards, minimum 160 characters LCD unit 5.7` TFT to indicate Fire Fault Signal with address and analog output, external/inbuild printer to log all fire or fault events complete in all respects The Panel Shall be sheet Steel power coated, sealed to IP30 The Panel shall have 20 Zones with individual LED Indicators, expandable to 80 LED Indicators The Panei shall have 3 Serial Ports The panel shall nave a built in power supply, battery charger maintenance free battery 24 Ah. 2x 12 Volt SMF Lead Acid battery capable of running for a minimum 24-hour operation complete as required. The panel should also have IP30 or better protection and conforming to BS5839 standards and Duly Approved by EN 54/UL/VDS as per specifications complete in all respect up to the entire satisfaction of Engineer-in charge of work. Make: Bosch FPA 1000 Series, Cerberus by Simens, Edwards EST3, Honeywell Morley Zxe (Series)

SITC of addressable multisensor smoke detector including mouming base with LED etc complete as required with 2 inbuilt Isolators as per NFPA 72 style 7 wiring requirements tone for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circurn and to meet style 7 requirements, Drift Compensavon feature and Automatic addressing Detector should monitor Electromagnetic interference and report to the pane current and average values. Detector should have IP40 or better protection rating EMC safery for detector shall be 50 V/m. Shall be UL/EN/VDS certification. (Detectors without Inouilt Isolators may be considered with an additional Isolator Module per detector) Make: Bosch FAP-440-T-FAA-440, Siemens Cerberus OH921-DB-11. Honeywell Morley MI-PTSE-B501, Edwards SIGA PHD plus SIGA.

SITC of addressable Heat detector with fixed and rate of raise feature including mounting base with LED etc. complete as required. Each Detector should have 2 inbuilt isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance with EFSG agreement EFSG/F/97/005 Detector should monitor Electromagnetic interference and report to the panel current and average values. Detector should have IP40 or better protection rating EMC safety for detector shall be 50 V/m. Shall be EN-54/UL/VDS certification (Detectors without Inbuilt Isolators may be considered with an additional isolator Module per detector). (Make: Bosch FAH-440-FAA-440, Siemens Cerberus H1921 DB-11, Honeywell Morley MI-RHSE-B501, Edwards SIGA DHI-SIGA.

SITC of intelligent Analog Addressable type Manual Call Point having Surface or flush mounting option fully compliant to EN 54 having Rotary Decade switches for addressing with back box for mounting as required conforming to BS5839 standards and duty approved by EN54/UL/VDS required to complete the job in all respect up to the entire satisfaction of Engineer in Charge of work Make: Morley HM/MCP/Glass, Bosch FMC-210-DM-G-R, Siemens XMS-S.

SITC of Addressable Control Relay Module with flexible network structures with a maximum switching current of IA @ 30V DC. Shall be EN54/UL/VDS Certification Make: Morley MI/DCMO, Bosch FLM-420-RLV1-E, Siemens Cerberus.

SITC of Addressable Monitor Module for monitoring of a line with EOL resistor/ Potential free contact/voltage monitoring shall be EN54/UL/VDS approved. (In case of 2 monitoring features in one module (points) each point shall be consider separately for payment). Make: Bosch FLM-325-214, Siemens Cerberus HTRI-M, Morley MI-DMMI-Edwards EST3.

SITC of Addressable Loop powered sounder with strobe complete with mounting base as required conforming to B55839 standards and duly approved by ENSEULVDS required to complete the job in all respect up to the entire satisfaction of Engineer in Charge of work. Make: Morley WINO-PR-NOS-MU/B501APVIN, Bosch FNM-420, Siemens FDS224R Edwards.

SITC of Glow Type A Sign Board photo luminescent of size 500 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink Sulphate as bare chemical class I material PSPA fixed on 3 mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener including cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer-in-Charge of work Make Pearl/Giolite/OMEX/PES

SITC of minimum 1000 Mtr. Range Siren generator provided at the roof of the building with separate power supply relay etc. with all accessories required to complete the job in all respect up to the entire satisfaction of engineer InCharge Make: National/Kheraj.