Restoration of rain damages on Panjhara to Dhaneti Bhurian to Dhaneti Barswala Km 0/00 to 2/250

Providing, laying, spreading and compacting of stone aggregate of specific sizes to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100(eighty-hundred) K.N. static Road roller in stages to proper grade and camber, applying and bromming, crushable screening at the rate of 0.22 cum ( zero point two two cubic meters) per ten square meters, to fill up the interstices of coarse aggregate, watering and compacting to the required density grading –III, 53mm to 22.4mm ( Fifty three millimeters to twenty two point four millimeters) size, 75mm ( seventy five millimetre) compacted thickness as per M.O.R.D. technical specifications clause No. 405 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.as per satisfaction and directions of Engineer-in-chargeincluding Caariage of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST.

Providing and laying Bituminous concretae using crushed stone aggreates of specified grading premixed with bituminous bind and filler,transporting the hot mix to work site by tippers,laying with paver finisher equpied with electronic sensor to the requried grade,evel and alignment and rolling with smooth wheeled,vibratory and tanderm rollers to achieve the desired compaction and denisty as per specification,complete and as per direction of Engineer-in-charge 25 mm comacted thickness with bitumen of grade VG-10 @5.4% (percentage by weight of total mix) and lime filler @3%(percentage by weight of Aggreate)prepared in Batch Type Hot Mix Plant of 100-120 TPH capcityincluding Caariage of materials in all leads, lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge . The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but execulding GST.