Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹60.6 LAccepted-AOC CHAKKALAKKAL H KOTTAT P O | L1 | Accepted-AOC L1 | |
| 2 | L2₹62.4 L+₹1.8 L (2.93%)Rejected-Finance | L2 | Rejected-Finance L2 |
Tender Value
₹60.9 L
EMD Value
₹50,000
Closing Date
19 Jan 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Thrissur corporation
Executive Engineer Thrissur corporation
Ollur Zonal Office Electrification, Division 29, Ollur zone, Thrissur Corporation
2024_LSGD_643767_6
PW2-17409/18,11.1.24EE1,ELE
Open Tender
Electrical Works
Item Rate
180 days
Superintending Engineer Thrissur corporation
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,760
₹50,000
11 Jun 2025
12 Jan 2024
22 Jan 2024
12 Jan 2024
19 Jan 2024
12 Jan 2024
12 Jan 2024 - 16 Jan 2024
Amount
Wiring for light point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Light point (Medium point)
Call bell point ( Medium Point )
Exhaust fan point (Medium point)
Ceiling Fan with stepped type electronic fan regulator (Medium point)
Combined plug point
Supply and drawing for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel or PVC conduit as required .3 X 1.5 sq. mm
6 X 1.5 sq. mm
3 x 2.5sq.mm
6 X 2.5 sq. mm
2 x 2.5sq.mm+1 x 1.5sq.mm
4 X 2.5 sq. mm +2 X 1.5 sq. mm
3 X 4 sq. mm
Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case reccessed counduit as required.20 mm PVC conduit
Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid
End cap for 100 x 50 mm CMS
Cable divider
Supplying and fixing following size/ modules PVC mounding box inside CMS on surfacefor modular socket outlet and modular switch as required.1 to 3 module PVC mounting box inside CMS
5 to 8 module PVC mounting box inside CMS
Supplying and fixing following size/ modules PVC surface box on surface or in recess,for modular socket outlet and modular switch as required.2 Module Plastic box ( 75mm X 75mm)
3 Module Plastic box (100 mm X 75mm)
6 Module Plastic box (200 mm X 75mm)
8 Module Plastic box (250 mm X 75mm)
Supplying and fixing following size/ modules modular base and cover plate on existing modular PVC surface boxes etc required.1 / 2 Module plate
3 Module plate
6 Module plate
8 Module plate
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch
5/6 A socket outlet
15/16 A switch
15/16 A socket outlet 2 Module type
15/16 A switch with indicator
15/16 A socket outlet 3Module type
Metal clad socket 5 pin 63 A with Plug top
Net work socket RJ 45 outlet
Telephone socket RJ 11 outlet
Supply and installation of single phase double cover dust and vermin proof enclosure of MCB DB including copper/brass bus bar neutral link and DIN bar suitable for fixing MCB ,isolator etc. including providing blanking plates in the blanking slots ,fixed on wall making good the damages,colour washing etc.as required. ( Make Legrand/ Siemens/ L&T/Hager/ GE).Single phase 12 way DB duble door
Supplying and fixing of following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar interconnections, powder painted including earthing etc. as required. (but without MCB/ RCCB/Isolator). ( Make Legrand/ Siemens/ L&T/Hager/ GE)6way (8+18) Double door
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( Make Legrand/ Siemens/ L&T/Hager/ GE)40 A Double pole Isolator
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( Make Legrand/ Siemens/ L&T/Hager/ GE)63A Four pole Isolator
Supplying and fixing 5 A to 32 A rating, 240 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB completewith connections, testing and commissioning etc. as required. ( Make Legrand/ Siemens/ L&T/Hager/ GE)Single Pole MCB
Double Pole MCB
Supplying and fixing 40 A to 63 A rating, 240 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB completewith connections, testing and commissioning etc. as required.40 A to 63 A Tripple Pole MCB
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.( Make Legrand/ Siemens/ L&T/Hager/ GE)40 A double pole 30mA, RCCB
Supplying and fixing following rating, four pole, (three phase and neutral), 415V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( Make Legrand/ Siemens/ L&T/Hager/ GE) 63 A four pole 30mA, RCCB
Supply, conveyance installation testing and commissioning the light fittings of following box types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp for box type fixture (including LED Tube). ( Model Crompton, Bajaj, Philips )
Supply, conveyance, installation, testing and commissioning of Square/circular and reflected type ceiling down 24W LED light using standard accessaries, wiring 16/.02mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire and giving connections etc complete. ( Model Crompton, Bajaj, Philips)
Supply, conveyance, installation, testing and commissioning of Square/circular and reflected type ceiling down 6W LED light using standard accessaries, wiring 16/.02mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire and giving connections etc complete. ( Model Crompton, Bajaj, Philips)
Supply and fitting cast alluminium stove enamelled elliptical shape bulk head fitting with porcelane holder and GI meshguard with front clear glass and 9/10W LED lamp ( Model Crompton, Bajaj, Philips) to wall including giving connections using 16/0.20 mm PVC insulated and sheathed 3 core round copper conductor etc complete.
Supplying, installing, testing and commissioning LED Street light 70/72 W, 240V, 50Hz ( Model Bajaj, Philips ) made up of pressure die cast aluminium housing with toughened glass with individual high power LEDs with secondary optics having TOP OPENING/accessible driver compartment having IP66 protection and impact resistance of IK07.The LED should be fixed on die-cast extruded aluminium heat sink for proper thermal management with Manufacturer name engraved /embossing in housing to allow traceability till life of fixture (stickering and printing is not acceptable). Including cost of suitable GI pipe bracket with clamps for fixing the light and connecting with PVC 3 core round cable etc. complete as required.
Supplying, installing, testing and commissioning LED Flood light 100W, 240V, 50Hz, ( Model Philips,Bajaj, ) output > 120 lumen/W 5700 K with IP 66 protection, internal surge protection 4 KV, LED Chip make Cree/Lumilled/Nichea with power factor>0.95 at full load, flood light luminaire with high power light source with secondary optics: reflector made up of high purity matt finish anodized aluminium sheet and built-in isolated electronics LED driver ensures zero maintenance as per IS 15885 Part-2/Sec 13. Including provide suitable clamps for fixing the light etc. complete as required.
Supplying, installing, testing and commissioning LED Flood light 50W, 240V, 50Hz, ( Model Bajaj, Philips, ) output > 120 lumen/W 5700 K with IP 66 protection, internal surge protection 4 KV, LED Chip make Cree/Lumilled/Nichea with power factor>0.95 at full load, flood light luminaire with high power light source with secondary optics: reflector made up of high purity matt finish anodized aluminium sheet and built-in isolated electronics LED driver ensures zero maintenance as per IS 15885 Part-2/Sec 13. Including provide suitable clamps for fixing the light etc. complete as required.
Supplying and fixing Callbell/ Buzzer suitable for single phase,230volts, complete as required.
Supply, conveyance, installation, testing and commissioning of Ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan ( Model Crompton, Bajaj, Usha, Havells, Orient) complete with 300mm down rod, canopies, shackeles and blades etc complete.
Supply, conveyance, installation, testing and commissioning of 200/230 mm sweap Exhaust fan (Model Crompton, Bajaj, Usha, Havells) in the existing opening, fixing necessary bolts nuts making good the damages etc. as required including giving connection with required length of 16/.02 mm PVC insulated and PVC sheathed 3 core round copper conductor flexible wire etc complete.
Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.
Supply of the following size PVC/ XLPE insulated armoured cable with aluminium conductor for working voltages up to and including 1100 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE .16 sq.mm 4 core Aluminium conductor
35 sq.mm 4 core Aluminium conductor
Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 kV grade as required.4x 16 Sq.mm
4x 35 Sq.mm
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface clamped with 1mm thick saddle. as required. ( Upto 35Sq.mm) 4 x 16 Sq.mm
Supplying and installing following size of painted with powder coating Ladder type cable trays are fabricated out of Mild Steel Conforming to I.S. 1079; 1994 / I.S. 513; 1994 with Runner insize 25x25x3 mm angle and welded with Rung size 20x3 mm flat 2Nos in 300mm intervals, joined with connectors, including bolts & nuts and including fixing on wall with suitable size Porcelain supporting materials and screws etc as required.300 mm width
Supply and drawing Network cabling for UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed steel or PVC conduit as required . Single run
Supply and drawing 20 pair FR PVC sheathed copper conductor polyethylene polyester taped Telephone cables for indoor application ( un - armoured) conforming to ITD specifications in the existing surface/ recessed steel or PVC conduit as required.
Supplying and Fixing of net work 9U rack of suitable for net work switch in built with cable organiser and cooling fan etc complete.
Supply, Installation, Testing & Commissioning of 24 port giga byte 10/1000 mbps network switch etc complete.
Supplying and Fixing of Krone Type DP Box 50 Pair Indoor Telephone distribution box metal body for KRONE Module etc complete.
Supplying, Installing Testing & Commissioning telephone krone 20 module etc complete.
Crimping and Testing the Cat6 RJ45 Ends, Cat6 Connector, Ethernet Cable Crimp Connectors UTP Network Plug for Standard Cable, LAN Crimp Module Plugs etc complete.
Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required
Main LT Panal Board MSB : Supply, fabrication, erection, testing and commissioning the following floor mounted free standing cubicle type fully compatmentalised (Busbar chamber, Cable chamber, CTmeter chamber, MCCB cabin and 7 Nosoutgoing cabin and spare 1No.) dust tight, vermin proof LT panel boards fabricted out of 16SWG CRCA sheet and powder coated as per IS standards . The Board shall be completed with phase indication lamps in the incoming, suitably rated TPN Aluminium Busbars and earth bus of adequate capacity, double earth connection to all switches, intenal rigid connection etc. (Incomer:- 125A TPN MCCB TM with Rotry handle -1No E/L relay and O/L relay ,TPN Al. Busbar as per ISS, Outgoing :- 63A TPN Isolator- 7 Nos
Supplying and Fixing Compartmentalised panel board of size 800x600x250mm, made of CRCA sheet 16SWG and powder coated as per IS standards, including copper/brass bus bar neutral link and DIN bar provision for fixing 4P MCB / Isolator/ RCCB/ as incomer and SP/ DP MCB as outgoing, directly fixing on wall using proper bolts ,nuts etc.and making good the surface of wall etc. complete
Installing and commissiong of 13KW SOLAR ENERGY PLANT Mono perc Half Cut cell ( on grid & remote monitoring system) , Supply and installation of Mono perc Half Cut cell PV modules with wattage of 670 Wp ( Make- CREDENCE/ RAYZON/ RENEWSYS) and aluminium channel mounding stucture of C type and spring nut and bolt, DCDB OF 13KW DC MCB and SPD, one no: of grid tie Inverter( MakeFRONIUS / GOODWE /SOFAR),13,000 Watts DC compatible Inverter, one no of ACDB of 13 KW with MCB and SPD, required length suitable size copper DC cable double insulated with UV protection, required length suitable size copper AC cable , wiring materilas including UV protected conduits, fiisure,screw, metal enclosure, saddles, Energy meter, Solar meter and Net meter, single spike arrester of 50sqmm copper conducter and earth rod for lighting protection required all other metarials etc complete. PV Module Performance warrantied for their output peak watt capacity not less than 90% at the end of 10 years and 80% at the end of 25 years and Inverter warranty 5 years.
Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry 'enclosure with cover plate having locking arrangement and watering GI pipe of 20mm dia,2.7 meter long etc. with charcoal/ coke and salt as required.
Supply and laying following size GI pipe 0.5metre below ground level for drawing copper conductor for earthing including the excavation of earth.etc complete. 15 mm dia GI pipe ( medium class )
Supply and drawing following size copper conductor for bare copper conductor along with cable and earthing including copper socket etc. as required.3.15 mm (10 SWG)
E R ANANDAN
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_984796.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .