Repairs to Staff Quarter at Kaprada Ta.Kaparada Dist. Valsad (Waterproofing sanitary work and Building repairing work)

Sr. Description of Item Quantity Unit Rate Amount

1 Dismentaling tiled of stone floors laid in mortar including stacking of 241.00 Sq.Mt 71.90

serviceable materilas and disposal of unserviceable materials with all

2 Demolition and disposal of unserviceable materials with all lead and 4.00 Cu.Mt 609.26

lift.(i) Lime concrete.

3 Providing and laying water proofing treatment by conventional 22.00 Sq.Mt 945.36

method including cleaning the slab surface by wire brush as directed

including provding first layer of C.M. 1:4 of 40 mm thickness mixed

with water proofing compound at rate prescribed by manufacturer,

including putting of brick bats of average thickness 40 mm Well

immerssed in water laid uniformly on first layer of mortar including

applying cement slurry @ rate of 0.08 bag/sqm. on fixed layer of brick

bats including maintaining necessary slope, in second layer 40 mm

thick C.M 1:4 mixed with water proofing compound as directed,

including finishing smooth with cement slurry as directed complete.

4 Dismantling santtary fittings like wash basin, W.C.Pan Indian and 22.00 Nos 405.65

European type, flushing tank etc. including stacking the materials with

all lead and lift.

5 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with 250.00 Rmt 75.08

fittings and clamps including stacking the materials with all lead and

lift ( for any dia, of pipe)

6 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring 34.00 Sq.Mt 970.07

treads of steps and landing laid on a bed of 12 mm thick cement

mortar 1:3(1-cement:3-coarse sand)finishing with flush pointing in

colour cement slurry etc. complete. Colour and Shade approved by

Engineer-In-Charge

7 Providing and laying coloured glazed tiles of the size 300 mm x 200 207.00 Sq.Mt 1441.22

mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

8 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 55.00 Rmt 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

9 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 55.00 Rmt 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

10 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 60.00 Rmt 148.12

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of

11 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. 20.00 Rmt 195.67

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

12 Providing erecting and fixing double coated (ISI) water tank of 12000.00 Liter 3.95

required capacity each with all necessary fittings and connection etc.

complete on terrace.

13 Providing and fixing ball cock of approved. quality as directed.(A) 6.00 Nos 189.84

Copper Metal (ii) 50mm dia.

14 Providing, laying and jointing in true line and level 160 diametre 50.00 Rmt 831.22

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 160 mm diametre x

mm length x 196 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

15 Providing, laying and jointing in true line and level 75 mm dia. UPVC 30.00 Rmt 698.92

SWRType B pipe conforming to IS 13592-1992 with one end plain

and other end socketed with rubbering and fitting conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp at every 2000 mm c/c or shall be

conceled in walss as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all materials.

16 Providing, laying and jointing in true line and level 110 diametre 50.00 Rmt 836.73

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

17 Providing and fixing in PVC SWR cowel went 75mm dia to pipes.(B) 11.00 Nos 15.66

18 Providing and fixing in PVC SWR cowel went 110mm dia to 11.00 Nos 28.79

pipes.(B) 110mm dia.

19 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 22.00 Nos 571.08

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

20 Providing and fixing screw down bib taps of following size.(B) Brass 11.00 Nos 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

21 Providing and fixing brass screw down stop tap.(A) 15mm dia. 11.00 Nos 205.83

22 Providing and fixing pillar tap, capstan head, screw down high 11.00 Nos 308.73

pressure with screws, shanks and back nuts. (i) 15mm dia.

23 Providing and fixing wsh down water closet (European type, W.C. 11.00 Nos 1303.71

Pan) with integral P or S trap including jointing the trap with soil pipe

in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately (A) vitreous China Pattern :(i) in

24 Providing and fixing 12.5 Litres low level flushing cistern with a pair, 11.00 Nos 2344.42

of C.I. or Mild brackets, complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with polythene float, C.P

brass handle unions and couplings for connections, with inlet, outlet

and overflow pipes, 40mm dia. porcelain enamelled flush bend

including cutting holes in walls and making good the same

connecting the flush bend with cistern and

closet (overflow pipe to be measured and paid for separately)(A)

Vitreous China (I) In white colour

25 Providing and fixing plastic seat and cover for wash down water 11.00 Nos 291.33

closer with C.P. brass hinges and rubber buffers. (B) Plastic seal and

26 Providing and fixing Jet spray heavy duty with S.S. Braided hose 60 11.00 Nos 355.52

cm long with wall hook and other accessories etc. completed

27 Providing and fixing wash basin with single hole for pillar tap with C.I. 11.00 Nos 1961.83

Or M.S. brackers painted white including cutting holes and making

good the same including pillar tap, Brass waste, stop cack , bottle

trap and M I fisher union fittings :(ii) Flat back wash basin 500mm x

400mm size including all necessary fittings etc complete shade and

pattern as approved by Engineer in charge.

28 Providing and fixing 600mm x 450mm bevelled edge mirrror of 11.00 Nos 833.73

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

and fixing to wooden pluge with C.P. brass screws and washers.

29 Removing and scraping of old deteriorated plaster of any thickness 599.00 Sq.Mt 19.57

fromm wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift

30 Providing 15mm thick cement plaster in single coat on Rough 332.00 Sq.Mt 153.20

(Similar) side of single or half birck walls / concrete wall for interior

plastering and finished even and smooth in C M 1:4 (1 cement :

coarse sand) finish etc. comp. For Ground floor

31 Providing 15mm thick cement plaster in single coat on Rough 111.00 Sq.Mt 176.59

(Similar) side of single or half birck walls / concrete wall for interior

plastering and finished even and smooth in C M 1:4 (1 cement :

coarse sand) finish etc. comp. For First Floor

32 Removing dry or oil bound distemper by a washing and scraping and 156.00 Sq.Mt 300.66

sand papering the wall surface smooth including necessary repairs to

scratches complete.

33 Removing dry or oil bound distemper by a washing and scraping and 2303.00 Sq.Mt 11.30

sand papering the wall surface smooth including necessary repairs to

scratches complete.

34 Removing dry or oil bound distemper by a washing and scraping and 609.60 Sq.Mt 12.90

sand papering the ceiling surface smooth including necessary repairs

to scratches complete.

35 Applying two coats of putty & two coats of primer of approved brand 812.90 Sq.Mt 40.59

and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

36 Wall painting (two coats) with plastic emulsion paint of approved 2303.00 Sq.Mt 80.35

brand and manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

37 Wall painting (two coats) with plastic emulsion paint of approved 609.60 Sq.Mt 85.76

brand and manufacture on undecorated ceiling surface to give an

even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

38 Finishing wall with weather proof exterior emulsion paint on wall 1551.50 Sq.Mt 114.53

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

39 Painting Two coats (excluding priming coat) on previously painted 124.00 Sq.Mt 94.82

steel and other metal surface with enamel paint, brushing to give an

even shade including cleaning the surface of all dirt, dust and other

foreign matter.

40 Painting Two coats (excluding priming coat) on previously painted 154.00 Sq.Mt 93.54

wood and wood based surface with enamel paint, to give an even

shade including cleaning the of all dirt, dust and other foreign matter.

41 Removing, Repairing and Refixing Old existing wooden door shutter 37.00 Nos 1808.91

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures

like 3 Hinges, 1 Stoppers, 1 Aldrop , 2 Handle & 1 lock etc. and as

directed by engineer in charge etc comp.

42 Removing, Repairing and Refixing Old existing wooden window 18.00 Nos 1380.67

shutter including repairing the shutter/frame using Randha machine

and replacing old fixture and fastening with New Glass and SS

grade fixtures like 3 Hinges, 2 Stoppers , 2 Handle etc. and as

directed by engineer in charge etc comp.

43 Removing, Repairing and Refixing Old existing wooden ventiltion 18.00 Nos 314.11

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures

like and New Glass as directed by engineer in charge etc comp.

44 Providing and Fixing Pre Stitched Fiber Glass Mosquite Net with 41.00 Sq.Mt 360.57

Fastener tap in four side for all window and other opening with

required all accessories etc. complete.

45 Providing and fixing five courses water profing treatment with bitumen 559.10 Sq.Mt 471.51

felt consisting of second and fourth course of blown / bitumen or/ and

residual bitumen applied hot at 1.2 kg.per Sq.M.of area for each

course and first course with fibre base bitunen saturated under lay

type land third course with fibre base self finished felt type 2 grade

and fifth and final course of stone grit 6mm and down size or pea

sizes gravel spread at 0.008 Cu. Metre / Sq. metre including

preparation of surface excluding grading complete.

Deputy Executive Engineer, Executive Engineer

Dharampur (R&B) Sub Division Valsad (R&B) Division

Dharampur Valsad

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent should be

written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

*Estimated amount *Estimated amount

Put to tender Rs…1686082.15 Put to tender Rs…1686082.15

Deduct ……. % below Rs……………… Add ……. % Avove Rs…………..….

Net Rs. ……………… Total Rs. ………….…

In words ………………….…………………… In words ………………….

*( please strike out whichever is not applicable)

An Amount of 8729/- shall be recovered from the 1st RA Bill of this work towards salvage value of dismentalled / Diversion

material likely to be available from dismentalling the Dismentaling of stone flooring irrespective of the dismentalled quantity

actuallly received on site.

All works shall be carried out as public works department Handbook and other

specification of Division or as directed.

All the columns in schedule should be filled in ink or ballpen and the total of the

entries in last column should be struck by the contractor under his signature.

Rate quated include clearance of site (Prior commencement of work and at its close)

in all respects and hold good for work under all conditions,site moisture, weather etc.

The Contractor shall exhibit a board with detailed specification and details of work

as directed by the Engineer-In-Charge for which no extra payment shall be made.

The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

To be continued on additional sheet,if found necessary.

Deputy Executive Engineer, Executive Engineer

Signature of the contractor Dharampur (R&B) Sub Division Valsad (R&B) Division

ÀùËÿëÀËßÞí çèí Dharampur Valsad