SH Painting of various E and M installation at Lagoons and IRP etc

Painting of live LT panels, feeder panels, Starter panel and Distribution boards of different sizes without interrupting power connection with 2 or more coats of high class synthetic enamel paint of smoke grey or any other colour as approved by Engineer-in-charge after adequate surface preparation like cleaning the surface properly to remove dust/dirt with mineral spirits/rust inhibitive primer before painting ensuring good adhesion of the paint on the surface complete as reqd.

Writing of letters of size maximum 2" on the surface of electrical LT panels,feeder panels,Starter panel & Distribution boards etc. with white/black superior quality synthetic enamel paint or any other colour as approved by Engineer-in-charge complete as required.

Writing of letters of size maximum 4" on the surface of electrical LT panels,feeder panels, Starter panel & Distribution boards etc. with white/black superior quality synthetic enamel paint or any other colour as approved by Engineer-in-charge complete as required.

Cleaning , rubbing the old paint existing surface of rolling shutter at various pump houses, IRP & painting the same with two coats of synthetic enamel paint of approved brand colour upto the satisfaction of Engg-in- Charge etc. complete as required.

Preparing the surface free from dirt & rust by scrapping from the GI/MS pipe lines of water supply lines inside the different pump houses,IRP, lagoons and painting the same with two coats of synthetic enamel paint of approved brand and colour over a coat of red oxide metal primer upto the satisfaction of Engg-in- Charge etc. complete as required.

Complete cleaning of rust & dirt by scrapping from the centrifugal booster & sewage pump motor set i/c base , channels etc and spray painting the same with two coats of synthetic enamel paint of approved brand and colour over a coat of red oxide metal primer upto the satisfaction of Engg-in- Charge etc. complete as required.