LT RECONDUCTORING AT PARAMALA TFR BY LT ABC

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges

Dismantling (without damage) one km LT three phase 4 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors inrolls properly.

Dismantling (without damage) one km LT additional conductor line by dismantling cross arms, insulators and stacking the conductors in rolls properly

Dismantling (without damage) one km LT single phase 2 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors inrolls properly.

Erecting one LT PSC Pole in position including digging & back filling pit in ordinary soil.

Labour charges for loading LT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle)

Transporting one LT PSC pole by Head load - for an average distance of one km where transportation by hand cart is not possible. (normally limited to 0.3km).

Transporting poles by hired vehicle to a distance beyond 5km and carrying upto 4 numbers of poles. (Running km)

Straightening one slanted LT pole after unbinding the line and binding the line after work.

Straightening one slanted LT Cut Pole after lowering down the existing line and stringing the line after work.

Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).

Insertion of one HT PSC pole in existing OH line including digging & backfilling pit inordinary soil, fitting cross arm, insulators, binding etc., drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing)

Providing Fly stay for LT pole using LT PSC pole including digging and back filling pit in ordinary soil.

Providing Strut using LT PSC pole including digging and back filling pit in ordinary soil

Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil.

Fitting and providing one Strut using HT PSC pole including digging and back filling pit in ordinary soil.

Renewal of existing damaged/broken old 11kV Stay to the existing stay rod.

Providing Stay for LT poles including digging & back filling pit in ordinary soil.

Renewal of existing damaged/broken old LT stay in existing stay rod.

Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns) including digging separate pit (0.45x0.45x1.5m) at standard distance away from the pole/structure in ordinary soil & backfilling.

Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling.

Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.

Installing One No. 4 way Satellite Connector of size Main :16 to 95, Tap:4 to 35 Sq.mm to the LT AB cable of Standard size

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Providing Cable Tie

Providing End Caps

Erection of suspension clamp for LT ABC of any size

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Installation of Pre-insulated straight through joints for 50sqmm cable

Installation of Pre-insulated straight through joints for 16sqmm cable

Installation of Pre-insulated straight through joints for 70sqmm cable

Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap 16-95 sqmm

Please Enable Macros to View BoQ information