REPAIR/MAINT TO COVERED/OPEN DRAINS,CLEANING AND REPAIRS TO SEWAGE LINE AND MANHOLES,SEPTIC TANKS AND REPAIRS TO DRAIN,BARBED WIRE FENCING AND COMPOUND WALL AT L AND M AREA KATARIBAGH,REPAIR TO FLOOR,WALL TILES,CEILING AND JOINERY IN K AREA AT KATAR

Amount

Opening/Lifting of man hole cover and taking out waste soil,sludge, other sediments, solid waste, and liquid waste from manhole, septing tank in any condition by pumping or any other mechanical means and refix the man hole cover on completion of work, complete all as specified and as directed by Engineer In Charge. Note:- (a) The night soil, other sediments, solid waste, and liquid waste in any condition removed from septic tank shall be taken away from respective vicinities and NB(K) Premises on closed containers/conveyance and disposed off out of defence land (b) Disposal of the same shall be the responsibility of the contractor with out any extra expenditure to government. Disposal of waste shall be made in accordance with the regulations of authorities concerned. (c) The unit rate quoted shall be deemed to be inclusive of cleaning the neared MH & sewage line from that MH to septic tank.

M&L pumping out sludge water from manhole for cleaning blocked sewage line mouth, depth of manhole exe 1.5m complete all as specified and as directed.

Cleaning by roding /bamboo split and taking out waste soil, sludge and other foreign materials from sewage line/effluent drains below/above GL of any dia removed with sealed container complete all as directed .

Removing the chokes of WC/bathroom/kitchen traps/drains up to Ist manholes including cleaning of gully traps in single storied/ground floor of multistoried bldgs complete all as specified and as directed .

Cleaning of open drain not exc 45 cm wide and removal of silt to a distance exc 100 mtr and not exc 150 mtr away from starting point and disposed off complete all as specified and as directed.

Cleaning of CI rain water pipe/soil waste pipe of any dia by rodding with bamboo split or any other means including taking down inspection eye door cover and refixing inspection eye cover in existing position etc complete all as specified and as directed .

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white with 'P' or 'S' trap and connecting pipe to union of flushing cistern, in let and overflow pipes connecting flushing cistern including taking down old SWR pipe as required, complete all as specified and as directed .

S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests squatt pattern pan with 'P' or 'S' trap; including provision of lime concrete bedding and connecting pipe to union of flushing cistern, in let and overflow pipes connecting flushing cistern including taking down old SWR pipe as required, complete all as specified and as directed .

S&F in repairs PVC backing looking mirror of size 45cm x 60cm and complete all as specified and as directed .

S&F in repair fancy type 15mm pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed.

S&F in repairs, 15 mm bore bib tap cast copper alloy, fancy type chromium plated, with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and as directed

S&F in repairs, seat cover for EWC with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, man holes etc and getting out in soft/loose soil, complete all as specified and as directed

M&L for 110 mm bore PVC SWR pipe single socketed in any length with rubber ring joints laid in trenches or in floors including taking down old one complete all as specified and as directed

M&L for cement concrete bed to drain pipes110mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6 type C2 with 40mm graded aggregate complete all as specified and as directed

M&L for 600 mm dia reinforced concrete pipes class NP2 laid and jointed complete with collars all as specified and as directed

M&L for 300 mm dia reinforced concrete pipes class NP2 laid and jointed complete with collars all as specified and as directed

M&L for Concrete bed to drain pipes for 600 mm bore pipe including packing under and completely surrounding pipes with concrete after they are laid and tested in PCC 1:3:6 type C2 with 40mm graded aggregate complete all as specified and as directed

M&L for Concrete bed to drain pipes for 300 mm bore pipe including packing under and completely surrounding pipes with concrete after they are laid and tested in PCC 1:3:6 type C2 with 40mm graded aggregate complete all as specified and as directed

Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25cm thick (Soft/loose soil) complete all as specified and as directed

Removing excavated material n. exc. 50 mtr and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

Demolition of brickwork or stone/ boulder masonry, pre-cast concrete block masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, etc all as specified and as directed.

M & L brick work built in CM 1:6 with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.

All as per item No 25 above but except bricks

Taking down cement plaster on brick /concrete wall or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water any description, etc.complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface of wall finished even and smooth without using extra cement ,complete all as specified and as directed .

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Dismantling fencing wire mesh, any type including mild steel deformed bars in any size complete all as specified and as directed

Supply and fix MS galvanised chain link fencing of grid size 50x50x3.10 mm dia wire ( Weight not less than 3.25 Kg/sqm) including supply and binding with GI binding wire of gauge not less than 18, complete all as specified and as directed .

M&L for 10 mm dia round mild steel bars for binding concertina coil/chain link fencing and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip[ quality conforming to gde I IS 432(pt I ) complete all as specified and as directed .

S&F in repairs, vitreous china wash basin, 550x 400mm size, white flat back including 32mm chromium plated waste coupling and MS brackets etc. complete all as specified and as directed

S&F in repairs, PVC flushing cistern symphonic action type, 10 liters capacity, low level, white with inlet ball valve, float and handle including PVC flush pipe and fixing to WC complete all as specified and as directed .

S&F in repairs 40mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm complete all as specified and as directed .

Supply and fixing in repairs, 100 mm outlet dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) (20mm grade stone aggregate) complete all as specified and as directed .

S&F in repairs concertina coil of 610 mm diameter made out of 2.6mm dia spring steel wire 230gm/m2 (Min) dipped with corosion prevantive fluid (rusilo 901) including white colour each coil having a minimum 50 turns (circles) and an average weight of not less than 8.57 Kg including handle and spike at both end of coil erected in position on top of mild steel angle by fixing with GI clip for securing including necessory welding to the MS Section and as per manufactures instruction complete all as specified and as directed .

Dismantling wrought iron or mild steel work or cast iron work including C I pipes,bends etc of any description not otherwise provided for complete all as specified and as directed .

M&L for preparation of new or old painted steel and iron surface of any description over 10cm width or girth and applying two coatds of anti corrisive paint over a coat ofsuitable primer complete all as specified and as directed.

Demolition of cement Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level complete all as specified and as directed .

M&L for 100 mm thick plain cement concrete in 1:2:4 type B2 (using 40 mm graded stone aggregate) as in pavement and flooring etc and surface finished even and smooth with out using extra cement including necessary form work, complete all as specified and as directed .

M&L for 40 mm thick plain cement concrete in 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in pavement and flooring etc and surface finished even and smooth with out using extra cement including necessary form work, complete all as specified and as directed .

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and as directed .

M&L rendering 20 mm thick in cement mortar 1:3 on concrete/ brick surface by using water proofing compound as per manufacturers instruction, complete all as specified and as directed.

M&L for water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manu-facturer's instructions, complete all as specified and as directed :-(a) Preparing and cleaning of fully dry plastered surface as per IS:3067-1966.(b) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.2 Litre per Sqm.(c) Applying evenly One Coat of Blow Hot Bitumen of grade 85/25 @ 1.20 Kg per Sqm on Primed Surfaces.(d) Applying a layer of APP based Polymeric Mem-brance; 4.0mm thick (minimum) weighing 4.00 Kg Per Sqm (reinforced) with Polyster Non Woven Fabric weighing not less than 160 Grams per Square Metre by Torch application. The overlaps shall be minimum 150mm on the Transverse direction and 100mm on Longitudinal direction. (e) Applying one coat of Aluminium Paint @ 0.10 Litre per Sqm over APP based Polymeric Membrane.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and as directed.

M&L for 20 mm thick Screed bed or bedding layer in cement mortar (1: 6 ) for laying in floor finishes complete all as specified and as directed .

M&L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry complete all as specified and as directed .

M&L for 75 mm thick Cement concrete type C-2, 1:4:8 (40mm graded aggregate) as in pavement and flooring etc complete all as specified and as directed .

M & L for coarse aggregate for granolithic floors, graded from 12.5mm to 4.74mm, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified

M&L for Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed .

M&L for Plain Cement Concrete 1:2:4, type B0 using 12.5mm graded stone aggregate as in mass concrete arround the sides of paver blocks or chamfered edges, top of wall etc including necessary form work complete all as specified and as directed .

Supply only liquid water proofing compound, conforming to IS and as approved, complete all as specified.

S&F in repairs PVC waste pipe 32mm bore 80 mm long complete all as specified and as directed .

Dismantling of plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern roof covering complete

S&F 0.71 mm thick, aluminium sheeting alloy 31000 H4 in ridge,hip,valley gutter,drip and straight flashing(length and gritg as fixed) complete all as specified and as directed.

M& L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L for structural steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to Fe-410W(grade E-250) complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) n exc 1.50 sq. m each complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc 1.50 sq. m but not exc 4 Sqm each complete all as specified and directed

Taking down shutters of any description exc 1 sqm and n exc 2Sqm each complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on brick or concrete surface of wall finished even and smooth without using extra cement ,complete all as specified and as directed .

M&L preparing new plastered /undecorated surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed.

S&F anodised aluminium sliding window and ventilator frame with out sash bar,including all necessary jointing cleats,hold fasts,hinges with fixing clips,rubber gasket,anodised snap beading,anodised aluminium fittingsuch as 'F' chanel if required for wire mesh or aluminium grill,handle,locking arrangement etc . Section used for sliding window and ventilator frame as follows (1) catlogue No 4095 of size 61.98x29.70x1.60 mm= 2 track. (2) catlogue No 9777 of size 39.00x20.00x1.60 mm= shutter vertical. (3)catlogue No 3994of size 41.00x20.00x1.20 mm - shuttedr top & bottam . (4)catlogue No 9778 of size 39.00x20.00x1.50mm= shutter vertical inter lock, of Hindalco or equivalent make as approved by GE complete all as specified and as directed.

S&F 5 mm thick frosted sheet glass fixed to aluminium or wooden frame work using necessary beadings etc n.exc 0.50 Sqm in each pane complete all as specified and as directed .

S&F anodised aluminium sliding window and ventilator frame double shutter (glass and wire mesh)with out sash bar,including all necessary jointing cleats,hold fasts,hinges with fixing clips,rubber gasket,anodised snap beading,anodised aluminium fittingsuch as 'F' chanel if required for wire mesh or aluminium grill,handle,locking arrangement etc . Section used for sliding window and ventilator frame as follows (1) catlogue No 4087 of size 92.36X29.70X1.20 mm=3 track bottom (2) catlogue No 4099 of size 92.36X29.70X1.60 mm= 3 track side & top shutter vertical. (3) catlogue No 9395 of size39.00x20.00x1.10 mm= shutter vertical (4)catlogue No 3994 of size 41.00x20.00x1.20 mm - shuttedr top & bottam. (5)catlogue No 9779 of size 39.00x20.00x1.60mm= shutter vertical inter lock, of Hindalco or equivalent make as approved by GE complete all as specified and as directed.

S&F 5 mm thick plain sheet glass ordinary quality fixed to aluminium or wooden frame work using necessary beadings etc n.exc 0.50 Sqm in each pane complete all as specified and as directed .

S&F aluminium anodised grill having mesh size 50 mmx50 mm made out of 6 mm wde 3 mm thick aluminium section including U chanel,fixing with screws etc complete all as specified and as directed .

S&F stainless steel wire cloth, 0.63 mm nominal dia or wire and average width of aperature 1.40mm, fixed with aluminium F channel including necessry fixing arrangements complete all as specified and as directed .

M&L for 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

M&L for 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed.

S & F 2nd class hardwood 30 mm thick glazed skeleton shutters, open rebated and prepared to receive glass, guaze etc, (without sash bars), edges of framing plain, chamfered or rounded fitted with cut, and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a) complete all as specified and as directed.

S&F 100mm mild steel butt hinges, medium weight, cold rold, complete all as specified and as directed.

S&F 150mm long Aluminium anodised handle, cast type complete all as specified and as directed.

S & F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 300mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy complete all as specified and as directed.

M& L for mild steel flat iron 25x3 mm as in hold fast for fixing door frame etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

M&L for Plain Cement Concrete 1:2:4, type B1 using 20 mm graded stone aggregate for embedding hold fast etc including necessary form work complete all as specified and as directed .

M&L for preparation of new wooden surface exceeding 10 cm width or girth and applying two coats of synthetic enamal paint over acoat of pink primer complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5.0mm plain colour PVC sheet reinforced with mild steel square tube, and fixing in opening as per specifications and drawing, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of Mild Steel Tubes for Top & Bottom Rails having Mild Steel Frame shall be covered with heat moulded plain colour PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and plain colour PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail; Panelling of plain colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawing, complete all as specified and as directed.

S&F 100 mm stainless steel butt hinges, medium duty complete all as specified and as directed.

M&L for 15 mm thick Screed bed or bedding layer in cement mortar (1: 6 ) for laying in floor finishes complete all as specified and as directed .

M&L for 10 mm thick rendering in cement mortar (1: 4 ) on vertical surface for laying in wall tiles complete all as specified and as directed .

M&L for non skid ceramic coloured tiles 300x300x7 to 8 mm thick in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed .

M&L for non skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified

M&L for glazed ceramic coloured tiles 350x 250x 7 mm/ 450x350x7mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified

M&L for hard wearing ceramic tiles, 300x300x 10 mm thick laid in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified (Make : VC shield series of SOMANY / Abrasion resistant series of Johnson or equivalent make approved by GE), complete all as specified and as directed .

Dismantling of Wall or ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc , keep in safe custody for reuse complete all as specified and directed.

S&F interlocking aluminium alloy anodized snap grid for ceiling consists of main Tee runners of size 38mm x 25mm x 1.5mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Tee 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 32mm x 32mm x 1.5mm. Aluminium alloy extruded section shall be aluminium anodized (minimum 15 micron) and shall conform to IS-733, IS-1285 and IS-737 complete all as specified and as directed.

M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws all as specified and as directed.

S&F in repair PVC Low Level Flushing Cistern 10 Litre capacity, White, valveless, symphonic action type, with Inlet, Ball Valve, Float and Handle, fixing brackets and connections to pipes complete all as specified and as directed.

Vackachan Constructions