Maintenance work for civil structures at various sewage pumping stations in South Zone-A (Udhana) of Main Drainage Department of the Surat Municipal Corporation.

Name of Work :- Maintenance work for civil structures at various sewage pumping stations in South Zone-

A (Udhana) of Main Drainage Department of the Surat Municipal Corporation

Item Description Quantity in Per in

1 Excavation for foundation includ. sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp.

(A) Loose or Soft Soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 Mt. depth 200.00 117.26 C.M.

2 Excavation for foundation includ. sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp.

(A) Loose or Soft Soil

Executed With Manual Labours

(1) Up to 1.5 Mt. depth 200.00 203.83 C.M.

3 Providing & Laying C.C 1 : 5 : 10 (1 Cement : 5 Coarse Sand : 10 Graded Stone 5.00 2517.44 C.M.

Agg. 40 mm Nominal Size) & curing comp. excl. cost of from work in :

Foundation & Plinth

4 Providing & laying cement concrete 1 : 4 : 8 (1 Cement : 4 Coarse Sand : 8 5.00 2680.21 C.M.

Graded Stone Agg. 40 mm nominal size) & curing comp. excl. cost of form work

in (A) Foundation and Plinth

5 Providing & laying C.C 1 : 3 : 6 (1 Cement : 3 Coarse Sand : 6 Crushed stone agg 10.000 3005.76 C.M.

20mm Nominal size) & curing comp. excl. cost of form work in : (A) Foundation

6 Providing & laying cement concrete 1 : 1.5 : 3 (1 Cement : 1.5 Sand : 3 Graded 25.00 4146.15 C.M.

Stone Agg. 20 mm nominal size) & curing comp. Includ. cost of form work but

exclu. Cost of reinforcement for reinforced concrete work in : (A) Foundation,

footing, Base of columns and Mass concrete.

7 Providing & laying ordinary cement con.1 : 1.5 : 3 (1 Cement : 1.5 Sand :

Graded Stone Agg. 20 mm nominal size) finishing smooth curing etc. comp.

Incld. Cost of form work but excl. Cost of reinforcement for R.C.C. Work in : Up

(1) Having c/s area up to 0.08 sq. mt 10.000 12632.60 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 5.00 11166.97 C.M.

(3) Having cross sectional area more than 0.12 Sq. mt. 5.00 9201.68 C.M.

(1) Having c/s area up to 0.08 sq.mt 10.000 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 5.00 8174.41 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 5.00 7086.88 C.M.

8 Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work 800.00 76.21 Kg.

incl. bending, binding & placing in position etc. comp. Upto G.L./P.L.

9 Brick work using common burnt clay building bricks having crushing strength not 200.00 4237.00 C.M.

less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1 : 6 (1

Cement : 6 Fine Sand) (C) Fly Ash Bricks

10 Filling available excavated earth (excluding rock) in trenches. plinth, sides of 250.00 130.39 C.M.

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

11 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. 300.00 289.06 C.M.

thickness including watering, ramming and consolidating etc. complete.

12 20mm thick sand faced cement plaster on walls upto height 10 metres above 300.00 330.88 S.M.

ground level consisting of 12mm thick backing coat of C.M. 1 : 3 (1 Cement :

Sand) and 8mm thick finishing coat of C.M. 1 : 1 (1 Cement : 1 Sand) etc.

13 Providing & laying ordinary cement conn.1 : 1.5 : 3 (1 Cement : 1.5 Sand :

Graded Stone Agg. 20 mm nominal size) finishing smooth curing etc. comp. Incl.

Cost of form work but excl. Cost of reinforcement for R.C.C. Work in :

(1) Having c/s area up to 0.08 sq.mt

Ground Floor 10.00 12632.60 C.M.

Item Description Quantity in Per in

First Floor 10.00 12672.24 C.M.

Second Floor 0.00 12711.88 C.M.

Terrace (Third) Floor 0.00 12751.53 C.M.

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt

Ground Floor 5.00 11166.97 C.M.

First Floor 5.00 11206.61 C.M.

Second Floor 0.00 11246.25 C.M.

Terrace (Third) Floor 0.00 11285.89 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 5.00 9201.68 C.M.

First Floor 0.00 9241.32 C.M.

Second Floor 0.00 9280.96 C.M.

Terrace (Third) Floor 0.00 9320.61 C.M.

(1) Having c/s area up to 0.08 sq.mt

Ground Floor 15.00 9102.61 C.M.

First Floor 10.00 9142.25 C.M.

Second Floor 0.00 9181.89 C.M.

Terrace (Third) Floor 0.00 9221.53 C.M.

(2) Having c/s area more than 0.08 sq.mt. & upto 0.12 sq.mt.

Ground Floor 5.00 8174.41 C.M.

First Floor 0.00 8214.05 C.M.

Second Floor 0.00 8253.69 C.M.

Terrace (Third) Floor 0.00 8293.33 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 0.00 7086.88 C.M.

First Floor 0.00 7126.52 C.M.

Second Floor 0.00 7166.16 C.M.

Terrace (Third) Floor 0.00 7205.81 C.M.

(2) Slabs having more than 8cm. and upto 10 cm. Thickness

Ground Floor 5.00 7984.42 C.M.

First Floor 0.00 8024.06 C.M.

Second Floor 0.00 8063.70 C.M.

Terrace (Third) Floor 0.00 8103.34 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Thickness

Ground Floor 5.00 7396.96 C.M.

First Floor 0.00 7436.60 C.M.

Second Floor 0.00 7476.24 C.M.

Terrace (Third) Floor 0.00 7515.89 C.M.

(4) Slabs having more than 13 cm. Thickness

Ground Floor 5.00 6813.01 C.M.

First Floor 0.00 6852.65 C.M.

Second Floor 0.00 6892.29 C.M.

Terrace (Third) Floor 0.00 6931.94 C.M.

Ground Floor 5.00 9531.24 C.M.

First Floor 5.00 9570.88 C.M.

Second Floor 0.00 9610.53 C.M.

Terrace (Third) Floor 0.00 9650.17 C.M.

(E) Chhajjas :-

Ground Floor 5.00 5512.83 C.M.

First Floor 5.00 5552.47 C.M.

Second Floor 0.00 5592.11 C.M.

Terrace (Third) Floor 0.00 5631.76 C.M.

Item Description Quantity in Per in

14 Providing & laying ordinary cement on.1 : 1.5 : 3 (1 Cement : 1.5 Sand :

Graded Stone Agg. 20 mm nominal size) finishing smooth curing etc. comp. Incl.

Cost of form work but excl. Cost of reinforcement for R.C.C. Work in :

(A) Staircases including landings etc.

Ground Floor 5.00 7380.20 C.M.

First Floor 0.00 7419.85 C.M.

Second Floor 0.00 7459.49 C.M.

Terrace (Third) Floor 0.00 7499.13 C.M.

(B) Vertical and horizontal fins

Ground Floor 0.00 10831.75 C.M.

First Floor 0.00 10871.40 C.M.

Second Floor 0.00 10911.04 C.M.

Terrace (Third) Floor 0.00 10950.68 C.M.

15 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work

incl. bending, binding & placing in position etc.comp.

Ground Floor 100.00 76.21 Kg.

First Floor 100.00 77.21 Kg.

Second Floor 0.00 78.21 Kg.

Terrace (Third) Floor 0.00 79.21 Kg.

16 Brick work using common burnt clay building bricks having crushing strength not

less than 35 kg./Sq.Cm. in Cement Mortar 1 : 6 (1 Cement : 6 Fine Sand) (C) Fly

Ground Floor 100.00 4511.97 C.M.

Second Floor 0.00 5061.92 C.M.

Terrace (Third) Floor 0.00 5379.24 C.M.

17 Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1 : 4 (1 Cement : 4 Coarse

Sand) (C) Fly Ash Bricks

In Foundation and Plinth 50.00 625.53 S.M.

First Floor 10.00 631.79 S.M.

Second Floor 10.00 638.04 S.M.

Terrace (Third) Floor 0.00 644.29 S.M.

18 Uncoursed rubble masonary with hard stone of approved quality in foundations 0.00 2500.01 C.M.

and plinth in cement mortar 1 : 6 (1 Cement : 6 Sand) including leveling up etc.

19 Providing Rubble Pitching with hard stone of approved quality in cement mortar 0.00 2550.00 C.M.

1 : 6 (1 Cement : 6 Coarse Sand) including leveling up ,Curing etc. complete

excluding pointing

20 Providing and filling rubbles including hand packing and filling interstices with 0.00 1064.00 C.M.

quarry spalls behind abutments and between returns as directed.

21 Providing & Applying 10mm. Thk. cement plaster in single coat on brick/

concrete walls similar surfaces for plastering & finished even & smooth with a

floating coat of cement slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1 : 3 (1 Cement : 3 Sand)

(A) For wall and similar surfaces

Ground Floor 50.00 189.79 S.M.

First Floor 25.00 217.93 S.M.

Second Floor 25.00 246.07 S.M.

Terrace (Third) Floor 0.00 274.20 S.M.

(B) For ceilings & soffits of stairs

Ground Floor 10.00 214.60 S.M.

First Floor 5.00 242.74 S.M.

Second Floor 5.00 270.88 S.M.

Terrace (Third) Floor 0.00 299.02 S.M.

22 Providing & applying 15mm thk. cement plaster in single coat on brick/ concrete 0.00 237.51 S.M.

walls similar surfaces for plastering & finished even & smooth with a floating

coat of cement slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1 : 3 (1 cement : 3 sand)

(A) For wall and similar surfaces

Ground Floor 0.00 237.51 S.M.

Item Description Quantity in Per in

23 20mm thick sand faced cement plaster on walls for height more than 10 metres 1000.00 330.88 S.M.

above ground level consisting of 12mm thick backing coat of C.M. 1 : 3 (1

Cement : 3 Sand) and 8mm thick finishing coat of C.M. 1 : 1 (1 Cement : 1 Sand)

24 Providing 20 mm thick double coat mala cement plaster on brick / concrete work 500.00 272.48 S.M.

for plastering comprising of base coat 12 mm thick cement plaster in cement

mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of

cement mortar 1 : 2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. complete.

25 Providing & applying 20mm Thick Heavy Roller plaster on walls or similar 0.00 324.00 S.M.

surfaces at all floor levels consisting of 12 mm Thk. Backing coat of C.M. 1 : 3 (1

Cement : 3 Sand) & 8 mm thk Finishing coat of C.M. 1 : 1 (1 Cement : 1 Sand)

apply thick cement slurry and apply roller horizontal as well as vartical ( two

times ) up to good quality and size of grain in elevation as per directed by

engineer incharge.

26 Providing throating or plaster drip and moulding it to R.C.C. chajja etc. comp. 10.00 41.66 R.M.

27 Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For 10.00 50.00 R.M.

all Floor (M.R.)

28 Providing and laying precast terrazo tile 20mm thick white, black, white and

black (or of the colour specified in specification of tender item) marble chips of

sizes upto 6mm laid in floors, treads of steps and landings on a bed of 25mm

average thickness of Lime mortar 1 : 1.5 (1 Lime Putty : 1.5 Coarse Sand) or

C.M. 1 : 6 (1 : Cement : 6 Coarse Sand) jointed with neat cement slurry mixed

with pigment to match the shade of tiles including rubbing and polishing

complete with precast tiles of

(A) Light shades using white cement 10.00 629.91 S.M.

29 Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1 : 6 (1 Cement : 6 Coarse Sand) or L.M. 1 : 1.5 (1

Lime Putty :1.5 Coarse Sand) laid over and jointed with grey cement slurry mixed

with pigment to match the shade of slab including rubbing and polishing etc.

(A) 25mm Thick 5.00 989.45 S.M.

30 Providing and laying polished kota stone slab 25mm thick in risers of 4.00 1076.94 S.M.

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1 : 3 (1 Cement

: 3 Coarse Sand) and jointed with gray cement slury mixed with pigment to match

the shade of slab including rubbing and polishing etc. complete.

31 Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria, 10.00 857.42 S.M.

Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring, treads of steps &

landings laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3 sand) finished with

flush pointing in white cement etc.com. For all floors

32 Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria, 10.00 887.64 S.M.

Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of steps &

dado on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary cement paste

for fixing and joined with white cement slurry etc. complete. For all floors

33 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and 10.00 914.69 S.M.

landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand

) finishing with flush pointing in white cement.

34 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo 10.00 987.86 S.M.

on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry

35 Providing & laying marble stone slab flooring over 20 mm.av. base of C.M.1:6 (1 0.00 2139.56 S.M.

cement : 6 coarse sand) & jointed with grey cement slurry incl. rubbing &

polishing comp.(A) Marble slab 25 mm. Thick.

36 Providing & laying granite slab 18mm thick in flooring, treads of steps and 0.00 2410.00 S.M.

landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement : 6 coarse sand)

or lime mortar 1:1.5 laid and finished with flush pointing in white or colour

cement including rubbing and polishing complete. ( Basic Rate :-

37 Providing & laying granite slab 18mm thick in skirting, risers of steps, dedo and 0.00 2449.00 S.M.

pillars laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) and

finished with flush pointing in white or colour cement including rubbing &

polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

Item Description Quantity in Per in

38 Providing & laying granite slab 18mm thick in Window-Door seal Frame Etc laid 10.00 2026.00 S.M.

on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) with nessary

adhesive material and finished with flush pointing in white or colour cement,

including rubbing & polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

39 Labour Charges For Edge Finished For Granite 25.00 43.43 R.M.

40 Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria, Jhonson,

Nitco, Somani, Bell, Asian or Euro make in flooring,treads of steps & Landing

laid on bed of 20 mm (Average) base of cement mortar 1:6 (1 Cement : 6 Coarse

sand) on new surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with colour cement slurry including

finished with flush pointing & cleaning the surface etc. comp.Size 24" x 24"

For Antiskid tiles 15.00 1397.83 S.M.

41 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring 10.00 1040.35 S.M.

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1

cement : 3 coarse sand) finishing with flush pointing in white cement.

42 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers 12.00 1081.71 S.M.

of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand)

and jointed with white cement slurry.

43 Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36" in flooring 0.00 1484.61 S.M.

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1

cement : 3 coarse sand) finishing with flush pointing in white cement.

44 Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36" in skrting risers 0.00 1538.85 S.M.

of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand)

and jointed with white cement slurry.

45 Providing and laying chequered precast concrete tiles 22mm thick with aggregate 25.00 528.01 S.M.

of sizes upto 6mm in floors treads of steps and landing on 20mm thick bed of

C.M. 1:6 (1 cement : 6 sand) or L.M. 1:1.5 (1 Lime putty : 1.5 sand) jointed with

neat cement slurry with pigments to match the shade of the tiles.

46 Providing and laying rough chiseled dressed stone flooring over 20mm thick base

of cement mortar 1:5 (1 cement : 5 coarse sand) or L.M. 1:1.5 including pointing

with cement mortar 1:2 (1 cement : 2 stone dust) etc.

(A) 25mm Thick 0.00 549.47 S.M.

47 Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 course sand :

graded stone aggregate 20mm nominal size) laid in one layer finished with a

floating coat of neat cement

(A) 40mm Thick 10.00 303.84 S.M.

(B) 50mm Thick 0.00 356.33 S.M.

48 Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face 5.00 3720.00 S.M.

water proof Ply Vennered & 1.5 mm th.laminate shall be pasted on both side with

adhesives as specified by the manufacturers. The laminate shall be as per

approved shade & texture, of make incl. Sal wood frames of finished size 12cm x

7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum fixtures &

fastenings For all Floor

49 Same as Above But Without Frame 5.00 2520.00 S.M.

50 Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows & 5.00 5533.68 S.M.

clearstory windows incl. Indian teak wood frames of finished size 12cm x

7cm.incl. anodized aluminum fixtures & fastenings incl. Primer coat of approved

quality & two coats of oil painting etc. For all Floor (A) Fully Panelled

(B) Partly Panelled and Partely Galzed 1.00 5185.03 S.M.

(C) Fully Galzed 1.00 4551.69 S.M.

51 Providing and fixing 35mm thick shutters for Doors, windows and clearstory

windows including anodised alluminium butt hinges with necessary screws.

(A) Indian teak wood

(i) Fully Panelled 1.00 3941.37 S.M.

Item Description Quantity in Per in

52 Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP 0.00 2019.98 S.M.

shutter with wood grain raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame

is to be filed up with injected polyurethene foam done in situ along with

embedded wooden pieces for stiffening & also taking hinges & fixtures. The

whole FRP frame & shutter is to be water proof weather proof,termite proof

&resistance to mild acid/alkali. Rates are to be inclusive of S.S.hinges with

fastener sleeve & alluminium fixtures & fastentings.

53 Providing & fixing M.S.Grills of required pattern to wooden frames of windows

etc. At all floor levels with M.S. flats at required spacing & frame around square

or round bars with round headed bolts & round headed bolts and nuts or by

screws incl. Priming coat of Red lead paint etc. comp.

(A) Plain grill For all Floors 700.00 104.20 Kg.

54 Providing & fixing in position collapsible steel shutters with vertical channels 20 25.00 5865.10 S.M.

x10 x 2 mm. Braced with flat iron diagonals 20 x 5mm size with top & bottom

rails of T-iron 40 x 40 x 6mm. with 38mm dia. steel pulleys comp. with bolts,

locking arrangements, stoppers, handles incl. applying a priming coat of Redlead

paint etc. comp.

55 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe 15.00 129.02 Each

with hooked ends to RCC slabs curing, layig including painting the exposed

portion of loops, all as per standard design complete.

56 Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing,

centering, vibrating, curing & mixed with approved water proofing cement

compound or "CEMWET"or"PIDICRETE LW"integral water proofing admixture

as water proofing agent to be mixed with 50 kg. cement bag shall be as

recommended by the manufacture of the water proofing material, concrete work

for top, bottom slab & side pardi for Under ground Tank & Item incl. Necessary

excavation & refilling the available earth, 15 cm th' C.C 1:4:8 for bedding

concrete, Half B.M. in C.M. 1:4 outside wall, inside R.C.C. pardi as per design,

10mm.th. water proofing cement plaster in C.M. 1:3 with smooth

finishing,watering etc.Comp.to all inner face & bottom of tank curing etc. comp.

incl. Locking arrangement, outlet, inlet, overflow & wash out pipe arrangement as

necessary & C.I. Cover 0.60 x .045 weight not less then 35kg. etc. com. as per

structural drawing excluding Steel & as directed by Engineer- in-charge

Underground tank 10000.00 5.46 Lit.

57 Providing and filling in depressions of Bath and W.C. At all floor levels, after 10.00 500.00 C.M.

completing plumbing work of pans, pipes, traps etc.with cinder or fly ash as

directed by Engineer in charge etc. comp..

58 Note :- (1) The whole work is to be executed through specialized agency with a

guarantee of 10 (Ten) years given on a prescribed proforma duly stamped (2) The

rate shall include for work at all floors & conducting water proof test as directed.

(A) Providing and laying water proofing treatment to vertical and horizontal 10.00 296.00 S.M.

surfaces of depressed portions of W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

compound conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound

confirming to IS:2645 about 25 mm. th' in the floor of the depression & about

18mm th' On the side walls of the depression up to the floor level, water proofing

plaster about 18 mm. th' be continued on the walls above the floor level for a

height of 600 mm. with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading

@0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge (Cement consumption

0.316 Bags / S.M.)

Item Description Quantity in Per in

(B) Providing and laying integral cement based water proofing treatment 10.00 511.00 S.M.

including preparation of surface as required for treatment of roofs, balconies,

terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size

with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645 ,brick bats is finally

covered by jointless cement plaster 20mm th. in C.M. 1:4 added with special

water proofing compound confirming to IS:2645 & top smooth finished with

trowel with false chequered marking of 300 mm.size.The treatment is carried

along the vertical surface of the parapet & other adjoining wall up to height of

about 300 mm in a shape of quarter round vata Incl. curing etc. Comp. With

average thickness of 120 mm and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All above operations to be down

in order and as directed and specified by the engineer-in-charge. With average

thickness of 120 mm and minimum thickness at khurra as 65 mm. (Cement

consumption 0.511 Bags / S.M.)

59 Proiding & laying water proofing treatment to vertical and horizontal surfaces 10.00 505.00 S.M.

like consisting of (a) I course of applying cement slurry 4.4 kg per sq.mt. mixed

with water proofing compound confirming to IS:2645 in rcommended

proportions. (b) II corse of 20mm cement plaster 1:3 mixed with water proofing

compound in recommended proportion (c) III course of applying blown or /

resideal bitumen applied hot at 1.7 kg per sqm of area. (d) IV course of 400mm

micron th. PVC sheet. (Overlaps at joints of PVC sheet should be 200mm wide

and pasted to each other with bitumen about 1.7 kg./ sqm.)

60 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc. 10.00 101.91 No.

61 Providing & fixing at all floor levels,both face polished machine cut edge green 5.00 900.00 S.M.

kota stone slab (30mm) for urinal partition joined with grey cement slurry (1:1)

incl. Rubbing & polishing etc. complete. (M.R.)

62 Providing & fixing at all floor levels,both face polished machine cut edge Marble 5.00 1050.00 S.M.

slab for urinal partition joined with grey/White cement slurry (1:1) incl. Rubbing

& polishing etc. complete. (M.R.) ( Basic Cost- Rs. 450/S.M.)

63 Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor levels, 5.00 1401.60 No.

size 580mm incl. 100 mm size "P'or "S" trap for water closet squatting pan

joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc.

Comp.(A) Vitreous china long pattern of approved colour For all Floor

64 Providing and fixing Wash Down Water closet European type W.C. pan with 9.00 1303.71 Each

integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1

(1 cement : 1 find sand) (seat and cover to be measured and paid for separately)

(A) Viterous china pattern - I (i) in approved colour

65 Providing and fixing plastic seat and cover for wash down water closet with C.P. 5.00 291.33 Each

brass hinges and rubber buffers (B) Plastic seat and cover.

66 Providing & fixing wash basin with single hole for pillar tap at all floor levels, 5.00 2059.93 No.

with C.I. or M.S. Brackets painted white incl. cutting holes & making good the

same incl. fittings such as pillar tap, capstan head screw down high pressure with

screws, shanks & back nuts, C.P. Brass waste trap, screw down stop tap 15 mm.

dia. etc. complete. (A) Vitreous china flat back wash basin 550 mm.x 400 mm.

size in approved colour For all Floor

67 Providing & fixing Urinal or approved quality including conecting the Urinal 5.00 1036.27 Each

with waste pipe, tap etc. complete. (A) White earthen ware flat back or corner

type size 430 mm x 260mm x 350mm

68 Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor levels, 5.00 833.73 No.

mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to wooden plugs with

C.P.brass screws and washers etc. For all Floor

69 Providing & fixing C.P. brass pillar cock with copper connection, C.P. brass

screws complete

Make :- Cera F2013101, Parryware Cat. No.: G3102A1, Hindware Cat. No.: 1.00 1423.00 NO.

F650003, Jaquar FLR-5011N

70 Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor levels,

polished bright etc. comp.

Item Description Quantity in Per in

Make :- Cera F2013151 BIB COCK, Parryware G3104A1, Hindware F280002 1.00 1323.00 NO.

BIB COCK, Jaquar FLR-5047 N BIB COCK

71 Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all floor levels,

polished bright etc. comp.

Make :- Cera F2013163, Parryware G4834A1, Hindware Cat. No.: F530004, 1.00 1755.00 NO.

Jaquar FLR-5041N

72 Providing flush cock consisting lever, cartridge sleeve & flange & concealed part

Make :- Cera Exposed Part F2013751 & Concealed Part F4060101, Parryware 1.00 2110.00 NO.

T9824A1&T9823A1, Jaquar FLR 5083 KN, Concealed Body ALD-081,

Hindware F280052 & Conceled Stop Cock F850105

73 Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P. copper

connecting pipe 450 mm long and nuts, washer and brass flange complete,

including cutting and making good the wall where required.

Make :- Cera F1020362, Parryware T0712A1, Hindware Cat. No.: F440020 1.00 1432.00 NO.

F850094, jaquar CON 053 KN

74 Providing and fixing Wash Down Water closet European type W.C. pan with

integral P or S trap with normal closing seat cover L bend ncluding jointing the

trap with soil pipe in cement mortar 1:1 (1 cement : 1 find sand) (A) Viterous

china pattern - I

Make :- Cera Conventional B1510121 , Parryware C0297*/ C0278, Hindware 1.00 3282.00 NO.

sleek 20011, Jaquar- CNS-WHT-751P180SPPZ

75 Providing & fixing Wash Hung basin with single hole for pillar tap , Size- 550 x

400 mm at all floor levels, with C.I. or M.S. Brackets painted white incl. cutting

holes & making good the same etc.

complete. For all Floor

Make :- Cera Cat. No. S2040121, ParrywareC0434* (CTH), Jaquar SLS- WHT - 1.00 2656.00 NO.

6801 ,Hindware10004

76 Providing & fixing white vitreous china urinal of size 450 x325mm as per IS-

2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P. spreader,32mm dia CP

bottle trap and pipe to wall with C.P. flange complete including cutting and

making good the walls and floors wherever required.

Make :- CeraCat. No. S4020103, Parryware C0501*, Jaquar URS-WHT 13261H 1.00 2476.00 NO.

,Hindware BACK SMALL

77 Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with

Overhead Shower arm 200 mm with wall flange complete

Make :- Cera F7010602AB, Parryware, Jaquar OHS-1989, Hindware Cat. No.: 0.00 1569.00 NO.

78 Providing and fixing Towel Ring fabricated from seamless stainless steel tube

2mm thick in bath room with polished wall flange at end of bars with heavy duty

anchor fasteners & accessories.

Make :- Cera F5014115CH, Parryware F5014115CH, Jaqua ACN- 1121N, 0.00 890.00 NO.

Hindware F880007

79 Providing & fixing S.S.towel rail of 600 mm long approved make including,

providing & fixing C.P. brass screws, making holes in walls & making good.

Make :- Cera F5015103CH, Parryware F880005T, Jaquar 1111BSM, Hindware 0.00 1043.00 NO.

80 Providing & Fixing stainless steel recessed type Soap dish of approved make.

Including providing & fixing screws, washers, cutting & making good the walls.

Make :- Cera F5007106, Parryware T6902A1, Jaquar ACN-1131N, Hindware 0.00 793.00 NO.

81 Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor levels,

size 500mm x 400 mm incl. 100 mm size "P'or "S" trap for water closet squatting

pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine sand)

etc. Comp. (A) Vitreous china long pattern

Make :- Cera S3010109, Parryware C0117CS/C0117*, Jaquar, Hindware 20143 0.00 3275.00 NO.

82 Prov. & Fixing Health Faucet ABS Body with wall Hook and 1 Meter chrome

plated PVC Hose Pipe.

Make :- Cera F8030106AB, Parryware T9874A1, Jaquar ALD-587, Hindware 0.00 971.00 NO.

83 Providing & fixing white vitreous china Ladies urinal of size 470 x 360 x 100 mm

and 15mm dia. C.P. spreader, and pipe to wall complete including cutting and

making good the walls and floors wherever required.

Make :- Cera 4040101, Parryware C0503, Hindware 60003 1.00 2233.00 NO.

Item Description Quantity in Per in

84 Providing & fixing Paper holder with flap guard of 150 mm long approved make

including, fixing C.P. brass screws, making holes in walls & making good.

Make :- Cera f5002110, Parryware T6005A1, Jaquar AHS-1551, Hindware 1.00 1664.00 NO.

85 Providing & Fixing pressmatic bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make :- Cera F9020151, Parryware G2056A1 , Jaquar PRS-043, Hindware 1.00 1741.69 NO.

86 Providing Metropole Flush Valve Dual Flow 40mm Size (Concealed Body)

Make :- Cera F8010202 , Parryware T3302A1 , Jaquar FLV-1089NSQ, Hindware 1.00 3465.00 NO.

87 Providing Sink Cock with Regular Swinging Spout

Make :- Cera F2008251 , Parryware G3321A1 , Jaquar FLR-5347N, Hindware 1.00 1722.00 NO.

88 Providing & Fixing C.P. Brass screw down bib tap at all floor levels, polished

bright etc. comp.

(A) 15mm Dia. For all Floors 5.00 186.83 NO.

89 Providing & Fixing gun metal check or non return full way wheel valve at all

floors levels, etc. complete.

90 Providing & Fixing chromium plated brass half turn flush cock at all floor levels,

of approved quality incl. fixing in pipe line etc. Comp.

91 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)

chamber & water tight C.I. cover with frame of 300mmx300mm size (inside) with

weight includ. plastering smooth inside & outside 15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps

(A) 100mm x 100mm Size - P Type 5.00 1292.19 NO.

(B) 150mm x 100mm Size - P Type 5.00 1246.92 NO.

92 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5)chamber & water tight Pre cast R.C.C. cover of 300mmx300mm size (inside)

includ. plastering smooth inside & outside 15mm. th' in C.M.1:3 etc.comp. (i)

Square mouth traps

(A) 300mm x 300mm Size - P Type 5.00 1098.48 NO.

(B) 150mm x 100mm Size - P Type 5.00 1053.20 NO.

93 Prov. & Fix. 10 cm x 15 cm (4" x 6") S.W. trap with Inside dimension, 455 x 610 5.00 3155.63 NO.

mm & 450 mm deep sewer trap chamber with 23 cm th' B.B. masonary walls in

C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed

faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone

aggregate 20mm size), Foundation concrete 1:5:10 & fixing C.I. cover with frame

to be not less than 38 kg. On top etc. comp. for single pipe.

(A) Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 5.00 2904.47 NO.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5.00 222.71 Each

94 Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 5.00 2932.93 No.

1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces,

R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate

20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be not

less than 38 kg. On top etc. comp. Inside dimension, 455 x 610 mm & 450 mm

deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 5.00 2681.76 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5.00 242.39 Each

95 Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of

following nominal internal diameters incl. Testing of pipes and joints etc. Comp

96 Providing & laying in trenches galvanised mild steel tubes (medium grade)

TATA / ZENITH / ASIAN / JINDAL MAKE of the following nominal bore &

tube fittings etc. comp.

Item Description Quantity in Per in

97 Providing & Fixing to wall, ceiling floor at all floor levels, galvanised mild steel

tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL MAKE of the

following nominal bore, tube, fittings & clamps incl. making good the wall

ceiling and floor etc. complete.

98 Providing & Fixing abonite ball cock of approved qualities directed etc. comp.

99 Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size having weight 10.00 958.17 No.

not less than 35 Kg. etc. complete.

100 Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type "B")

of Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste discharge

system at all floor levels incl. All fixtures like bends, tees, shoe etc. jointed with

resin of approved brand & manufacture etc. comp. (M.R.)

101 Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at all floor levels

incl. fixtures like bends, tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. (M.R.)

102 Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line

of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings make or

equivalent as approved by angineer-in-charge. Pipe shall be fixed on the wall the

help of clamp at every two meter C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

103 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/

Tulsi/Finolex make for water supply line at all floor levels incl. fixtures like

bends, tees, shoe etc joined with resin of approved brand & manufacture etc.

comp. Pipe shall be fixed on the wall the help of clamp at every two meter C/C or

shall be concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

104 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110 x 110 mm 10.00 558.36 NO

diameter with jali of the following nominal diameter of self cleaning design with

C.I. scread down or hinged grating including the cost of cutting and making good

105 Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc. Comp.

106 Providing & fixing M.S. Holder Bat clamps at all floor levels of approved design 10.00 30.00 No.

to C.I. Or S.C.I pipes including the cost of cutting holes & making good the wall

etc. Complete - 100 mm. dia. (M.R.)

Item Description Quantity in Per in

107 Providing & fixing G.I./Aluminum Patti clamps at all floor levels of approved 10.00 20.00 No.

design to C.I. Or S.C.I pipes including the cost of cutting holes & making good

the wall etc. Complete - 100 mm. dia. (M.R.)

108 Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) mark 2500.00 3.95 Lit.

water tank of required capacity each with all necessary fittings & connection etc.

complete on terrace.

109 Providing & Fixing Kathi around the vertical PVC drainage pipes for

concealing with cement plaster 20 mm avg thickness (CM 1:3 [1 cement :

coarse sand]) finishing as per instruction given by engg. incharge.

(A) 75 mm PVC Pipe 0.00 173.00 R.M.

(B) 100 mm /110 mm PVC Pipe 0.00 180.00 R.M.

110 Boring holes 3.5 mt.deep in ordinary soil (for cast in situ piles) & disposal of the

surplus excavated soil as directed within a lead of 50 M. For following diameter

111 Providing & laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone

agg. 20 mm nominal size) & curing comp. Includ. cost of form work but exclu.

cost of reinforcement for reinforced concrete work in :

(A) Foundation, footing, Base of columns and Mass concrete. 25.00 3637.34 C.M.

112 Providing & laying ordinary cement con.1:2:4 (1cement : 2 sand : graded stone

agg. 20 mm nominal size) finishing smooth curing etc. comp. Incld. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in :Up to G.L./P.L.

(1) Having c/s area up to 0.08 sq. mt. 5.00 12123.79 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq. mt. 1.00 10658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 8692.87 C.M.

(1) Having c/s area up to 0.08 sq. mt. 1.00 8593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq. mt. 1.00 7665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 6578.07 C.M.

113 Providing & laying C.C 1:3:6 (1 cement : 3 coarse sand : 6 crushed stone agg. 20 10.00 3982.62 C.M.

mm Nominal size) & curing comp. incl. cost of from work in: wall caps/ copings.

114 Steel work welded in built up sections, framed work including cutting, hoisting,

fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or angle 5.00 9047.86 Qtl.

cleats as in main & cross beams, hip & trussed purlins connected to common

raffers & the like.

(B) For work like chain link fencing, above compound wall etc. 0.00 9047.86 Qtl.

(C) in trusses & trussed purlins upto 25 mt. Span & 15 mt. Overall height 0.00 9711.53 Qtl.

115 Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage thick with 10.00 311.00 SM

nuts, bolts, washer or G.I. pins, excluding M.S. angles etc.complete as per

relevent IS specification & directed by engineer in charge. (TATA or Jindal

116 Providing and fixing and fitting TATA or Jindal make G.I. barbed wire fencing 25.00 125.00 Kg.

with necessary barbed wire (12 x 14 guage, weight not less than 0.14 kg. / mt.)

pins, hooks, excluding M.S. angles etc. complete as per relevent IS

specification.& directed by engineer in charge

117 Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated sheet 10.00 999.00 S.M.

0.5 mm. thick roofing fixed with gslvanised grom J or L hook bolts and bolt 8mm

dia with bituman and impet washer filled with white lead etc. Excluding the cost

of purlins rafter and trusses. (Tata / Jindal or equivalent)

118 Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J

or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet washer or

G.I. limpet washer. filled with white lead complete excluding the cost of purlins,

Rafters and Trusses.

(i) 0.80 mm Thick sheet. (Tata / Jindal or equivalent) 5.00 727.13 S.M.

119 Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J

or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet washer or

G.I. limpet washer. filled with white lead complete excluding the cost of purlins,

Rafters and Trusses.

(i) 0.63 mm Thick sheet. (Tata / Jindal or equivalent) 5.00 1016.00 S.M.

Item Description Quantity in Per in

121 Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of

"L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer complete

(i) 0.80 mm Thick Sheet 5.00 641.94 R.M.

122 Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet

class-3 gutter with iron brackets 40mm x 3mm size bolts, nuts, washers etc.

including marking necessary connection with rain water pipes.

(i) 0.63 mm Thick Sheet 5.00 412.00 R.M.

123 Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of 0.00 464.00 R.M.

"L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer complete

(i) 0.63mm Thick Sheet 0.00 464.00 R.M.

124 Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the main

cladding on both edges. All fixing holes must be predrilled oversize as specified

for the sheet length and fastener being used. Fasteners must be fitted with

approved washers. Fixings should be tightened to ensure a weatherproof seal but

they must not be over tightened Side-lap fasteners must also be installed at

specified centers with the FRP sheet having clearance holes provided as per the

main fasteners Weatherproofing shall be provided at all flashing points under the

normal flashing by the fitting of a foam closure strip to match the profile being

used. Closure strips will be sealed to the sheet with an appropriate non setting

silicone sealant. Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm Thick 5.00 992.00 SM

(b) 2 mm Thick 2.00 1100.00 SM

125 Providing & Fixing Polycarbonate sheet roofing with surface of the sheet is

coated with an anti-UV Co-extrusion layer having good weather resistance, it can

maintain its optical properties and mechanical performance for a long time.

Fasting is usually done by screws. , The fastening screws should be inserted about

500 mm apart and 300 mm apart Along the supporting internal purlin and edge

pulin.All fixing holes with diameter at least 2 mm larger than screw must be

predrilled into each screw location. The screws should be 6mm diameter with

length according to sheet thickness and corrosion resistant, with at least heavy

duty hot dripped galvanized or stainless steel. Excluding the cost of purlins rafter

(a) 1.5 mm Thick Solid Sheet 5.00 1261.00 SM

(b) 2 mm Thick Solid Sheet 5.00 1510.00 SM

126 Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in 1:1.5:3

concrete also horizontaly in line and connecting to purline angle etc by welding

(a) Medium duty "B" Class 0.00 750.00 R.M.

127 Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in 1:1.5:3

concrete also horizontaly in line and connecting to purline angle etc by welding

(a) Medium duty "B" Class 0.00 485.00 R.M.

128 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, 5.00 450.00 Kg

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top

of the floor or the side of waist slab with suitable arrangement as per approval of

Engineer-incharge, (for payment purpose only weight of stainless steel members

shall be considered excluding fixing accessories such as nuts, bolts, fasteners

129 Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I.

or PVC pipes including the cost of cutting holes & making good the wall etc.

Complete - 100 mm dia as per architect instructions.

(C) 110 mm dia to upto 150 mm Dia. 0.00 90.00 No.

(D) 150 mm to 200 mm Dia. 0.00 98.00 No.

Item Description Quantity in Per in

130 Providing and constructing sandwitch type Polish Kota Stone cooking platform 0.00 3010.00 Rmt.

0.6 mt. wide & 0.75 mt. height, including one end side Polish Kota stone (Double

Polish) of 1.25 mt. height & front Polish Kota stone patti of 10 cm wide, vertical

partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with

finishing smooth with cement slurry as required and Stainless Steel sink of

mt x 0.45 mt size of approved quality and make with required all fitings &

fixitures etc. comp as per instruction given by site in charge at all floors.

131 Providing and filling Epoxy grout of approved or suggested brand by consultant / 0.00 40.00 Rmt.

Engineer in charge in 4 mm to 6 mm thick tiles joint including spacer with

cleaning of joint by vacuum or blower etc.

132 Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all equipments,

tools, material, labour, etc. Standard procedure as mentioned in manufacturer's

specifications shall be strictly followed, which shall be submitted and got

approved from the authority prior to start of work. The rate shall also include cost

of drilling of hole of required diameter and depth as mentioned in manufacturer's

specification, cleaning the hole with required air blower and other necessary tools

and tackles, positioning, providing and grouting chemical, allied fixtures and

fasteners, etc. but excluding the cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and equipments, etc.

complete as directed by the engineer-in- charge.

133 Providing and fixing rolling shutters of approved make made of 80 mm wide

M.S. laths inter locked together through their entire lenght and jointed together at

the ends by end locks mounted on specially designed pipe shaft with bracket

plates, guide channels and arrangements for inside and outside locking with push-

pull operation including the cost of hood cover and spring etc. complete.

(A) Shutters having width below 3.5 mt. 0.00 3503.41 Smt.

134 Providing and fixing rolling shutters of approved make made of 80 mm wide

M.S. laths inter locked together through their entire lenght and jointed together at

the ends by end locks mounted on specially designed pipe shaft with bracket

plates, guide channels and arrangements for inside and outside locking with push-

pull operation including the cost of hood cover and spring etc. complete.

(B) Shutters having width 3.5 mt. and above 0.00 4495.02 Smt.

135 Providing & Fixing 3 mm thick metal sheet with CNC cutting to fix it on vertical 0.00 2677.00 Smt.

surface.Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint in beams

& joists channels angles, tees, flats with connection plates or angle cleats as in

main & cross beams, hip & trussed purlins connected to common raffers & the

136 Providing and laying broken china mosaic flooring for terrace using 12mm to 10.00 747.29 Smt.

20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto surface using white

cement including rounding off junctions and extending them upto 15 cm along

the wall clearing with water and oxalic acid etc. as directed.

137 Providing and Fixing Hollow steel Sections Framed Work including Cutting, 10.00 126.00 Kg

Hoisting, Welding & Fixing in position Purlin, Main Chord etc. as per Engineer-

in-charge.TATA / JINDAL / ASIAN Make

138 Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 10.00 23.68 Rmt.

including neat cement finishing, watering etc. complete.

139 White Washing with lime on wall surface to give an even shade & surface incl.

throughly brooming the surface to remove dirt, dust mortar drops & losse scales

of lime wash & other foreign matter Two coats.

(A) Walls 10.00 12.41 S.M.

(B) Ceiling 10.00 13.53 S.M.

do Extra Subsequant coat over above Item

(A) Walls 0.00 5.73 S.M.

(B) Ceiling 0.00 6.21 S.M.

Item Description Quantity in Per in

140 Colour washing with lime on wall over & incl. a primary coat of white washing to

give an even shade & surface incl. throughly brooming the surface to remove all

dirt, dust mortar drops & loose scales of lime wash & other foreign matter.Two

(A) Walls 0.00 12.41 S.M.

(B) Ceiling 0.00 14.65 S.M.

do Extra Subsequant coat over above Item

(A) Walls 0.00 7.96 S.M.

(B) Ceiling 0.00 10.04 S.M.

141 Distempering two coats with oil bound washable distemper of approved brand &

manufacture & of required shade on wall surface to give an even shade over and

& including a priming coat of alkali resistance primer of approved brand after

throughly brushing the surface to give an even shade after throughly brushing the

surface free from mortar droppings and other foreign matter and also including

preparing the surface even and smooth.

(A) Walls 20.00 72.23 S.M.

(B) Ceiling 20.00 80.35 S.M.

do Extra Subsequant coat over above Item

(A) Walls 0.00 30.39 S.M.

(B) Ceiling 0.00 33.57 S.M.

142 Apply two coats of putty and two coats of primer of approved brand and 10.00 40.59 S.M.

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other matter and sand papered

143 Wall painting (two coats) with plastic emulsion paint of approved brand and 10.00 79.39 S.M.

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

For every subsequent coat Extra over item no. above 0.00 33.72 S.M.

144 Distempering two coats on previously distempering wall (without primer) with oil 10.00 57.59 S.M.

bound washable distemper of approved brand & required shade on wall surface to

give an even shade after throughly brushing the surfaces clean of all grease, dirt

loose places of sceles & also including preparing the surface even and smooth.

145 Applying Priming coat over new steel and other metal surface after over and 35.00 35.00 S.M.

including preparing the surface by throughly cleaning oil, grease dirt and other

foreign matter and scoured with brushed fine steel wool, scrapers and sand paper

with ready mixed priming paint brushing red lead.

146 Painting two coat (excluding priming coat) on new steel and other metal surface 50.00 65.31 S.M.

with synthetic enemal paint, burshing to give an even shade including cleaning

the surface of all dirt, dust and other foreign matters

147 Painting one coat (excluding priming coat) on Previously Painted steel and other 10.00 38.03 S.M.

metal surface with synthetic enemal paint, burshing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matters.

For every subsequent coat Extra over item no. above 0.00 38.18 S.M.

148 Applying Priming coat over new wood & wood surface after & incl. preparing the 20.00 41.05 S.M.

surface by throughly cleaning oil grease dirt & other foreign matter sand papering

& knetting Really mixed paint brushing priming for enamel.

149 Painting two coats (excluding priming coat) on New wood & wood based surface 20.00 88.45 S.M.

with enamel paint to give an even shade & surface incl. cleaning of all dirt, dust

& other foreign matter.

150 Painting two coats (excluding priming coat) on previously painted wood & wood 20.00 45.18 S.M.

based surface with enamel paint to give an even shade & surface incl. cleaning of

all dirt, dust & other foreign matter.

151 Polishing with french polished on New wood & wood based surface to give an 20.00 135.70 S.M.

even surface incl. cleaning the surface of all dirt, dust & sand papered smooth

incl. a cost of wood filler.

152 Polishing with french polished on previously polishing wood & wood based 20.00 69.84 S.M.

surface to give an even surface incl. cleaning the surface of all dirt, dust & sand

papered smooth incl. a cost of wood filler.

153 Painting two coats of enamel paint over priming coat (including priming coat) on 10.00 90.00 S.M.

wall after removing entire surface dirt, dust foreign matter & also incl. preparing

the surface even & sand papered smooth etc. comp. (M.R.)

Item Description Quantity in Per in

154 Painting two coats of enamel paint (Excluding priming coat) over previously 10.00 60.00 S.M.

painted wall after removing entire surface with even shade & surface after

removing dirt, dust foreign matter etc. comp. (M.R.)

155 Providing & applying two coats of weather shield max paint (3 coats may be 90.00 82.00 S.M.

required in case of darker colours.) of ICI Dulux or Apex Ultima of Asian Paint

including applying exterior acrylic primer coat as per manufacturers specification

and directions in shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi,

algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir

brush, followed by water jetting if required. Fill up all minor cracks and defects

with white cement and sand mixture in the ratio 1:3. For application on

previously painted wall, previous coatings of paint must be thoroughly scraped

off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather shield max

156 Providing and fixing window having extruded aluminum Colour anodized section 10.00 2140.33 S.M.

frame main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal

Four track member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m,

vertical member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with

sliding shutters of horizontal member size 40mm x 18mm x 1.29mm@

0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt

with 5 mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame

as per details etc complete for window.

(A) Same as above but Colour anodized 5.00 2140.33 S.M.

157 Providing and fixing window having extruded aluminium Powder Coated section 5.00 1591.87 S.M.

frame main outer size 95 mm x 24 mm x 1.17 mm (of jindal section no:2459 @

Wt. of 0.738 Kg/mt), horizontal Three track member size 92 mm x 31.75 mm x

1.30 mm (of jindal section no.8688, @ Wt. 1.07 Kg/mt), vertical member of size

92 mm x 31.75 mm x 1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 mm (of

jindal section no:8947 @ wt. of 0.456 kg/mt), vertical member of size 40 mm x

18 mm x 1.29 mm (of jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm

thick transparent bronze colour tinted float glass with powder coated aluminium

fittings & fixtures and transparent silicon sealant glass fixing to frame as per

(A) Same as above but Colour anodized 2.00 1591.87 S.M.

158 Providing and fixing window having extruded aluminium Powder Coated section 2.00 1705.67 S.M.

frame main outer size 63.50 x 38.10 x1.95 mm (of Jindal section no.4605, @ Wt.

1.094Kg/mt) horizontal Two track member size 61.85 mm x 31.75 mm x

mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size

61.85 mm x 31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size 40 mm x18 mm x 1.29 mm

( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical member of size 40 mm

x 18 mm x 1.29 mm (of jindal section no:8947, @ Wt. of 0.456 Kg/mt/section

8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted

float glass with powder coated aluminium fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc. complete for window.

(A) Same as above but Colour anodized 2.00 1705.67 S.M.

159 Providing and fixing standared extruded of alluminium section of size 63mm x

38.10mm x1.2mm, @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium

frame for ventilation with 5 mm thick frosted glass as details etc complete for

(A) Same as above but Colour anodized 2.00 2414.00 S.M.

160 Providing and fixing standared extruded of aluminium section of size 61 x

x0.90 mm (of Jindal section no.14080, @ Wt. 0.471 Kg per mt) with Powder

Coated alluminium frame with 5 mm thick transparent bronze colour tinted float

glass as details etc. complete for fix window.

(A) Same as above but Colour anodized 2.00 2336.00 S.M.

Item Description Quantity in Per in

161 Providing & fixing partly panel & partly glass Powder Coated Aluminium doors

with aluminium section of Hindalco, Jindal , Narmada,Banco or Equivalent

approved make having Poder Coated outer frame Leg Partition section of

mm x 38.10 mm having weight 1.158 kg. / R.M. shutter section having size

mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door

vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974

kg./mt.), Glazing Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm

thick sheet glass in acid frogting and 12 mm thick prelaminated sheet of

Greenlam, Panama or archid make as approved by Engineer-in charge including

fixing brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized 2.00 3237.00 S.M.

162 Demolition including stacking of serviceable materials with all lead and lift.

(i) RCC Work 5.00 1057.47 C.M.

163 Demolition of brick work and stone masonry including stacking of serviceable

materials and disposal of unserviceable materials with all lead and lift.

(i) On Cement Mortar 5.00 550.40 C.M.

164 Removing and scraping of old deteriorated plaster of any thickness from wall / 5.00 19.57 S.M.

RCC member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift.

165 Dismentling steel work including distempering and stacking the maerials with all 5.00 3.67 Kg.

166 Dismentling door, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraces, holdfasts and other attacement etc. complete and stacking

them within all lead and lift.

(i) Not exceeding 3 Sq. Mt. in area. 5.00 187.71 EACH

167 Dismentling door, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraces, holdfasts and other attacement etc. complete and stacking

them within all lead and lift.

(i) Exceeding 3 Sq. Mt. in area. 5.00 251.34 EACH

168 Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys, Gutters etc.

stacking of serviceable materials and disposal of unserviceable materials with all

(i) G.I. sheet roofing. 0.00 47.72 S.M.

169 Removing of Collapsible Gate 1.00 1500.00 No.

170 Removing of Rolling Shutter 1.00 1000.00 EACH

171 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift.

(A) Kota stone flooring and steps 5.00 47.72 S.M.

(B) Marble 5.00 47.72 S.M.

(C) Tiles flooring / Dedo 5.00 47.72 S.M.

(D) Granite flooring and steps 5.00 47.72 S.M.

172 Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes with fittings and

clamps including stacking the materials with all lead and lift. (for any dia, of pipe)

GI pipe (15mm) 0.00 74.77 Rmt.

GI pipe (25 mm) 0.00 74.77 Rmt.

GI pipe (32 mm) 0.00 74.77 Rmt.

GI pipe (40 mm) 0.00 74.77 Rmt.

GI pipe (50 mm) 0.00 74.77 Rmt.

UPVC pipe 0.00 74.77 Rmt.

173 Dismentling wood work, wrought framed and fixed in frames trusses including 0.00 1759.37 C.M.

stacking the materials with all lead and lift.

174 Dismentling barbed wire in fencing including making rolls and also including 5.00 66.81 Rmt.

dismentling fencing posts including all earth work concrete in base and making

good the disturbed fround stacking useful materials as directed and disposing as

directed and disposing of the unserviceable materials with all lead and lift.

175 Dismantling sanitary fittings like wass basin, W.C. pan Indian and European type, 5.00 405.65 EACH

flushing tank etc. including stacking the materials with all lead and lift.

176 Sanitory fitting like bib tap, flush cock, pillar tap, angle cock etc. 5.00 50.00 EACH

177 Demolition of terrace including stacking serviceable materials and disposal of

unserviceable materials with all lead and lift.

Item Description Quantity in Per in

(i) Brick Tile Covering 5.00 42.42 S.M.

178 Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc.

stacking of serviceable materials and disposal of unserviceable materials with all

(i) A.C. sheet roofing 5.00 36.06 S.M.

179 Dismentaling of Kerb. 5.00 90.00 Rmt.

180 Box Cutting the road surface to proper slope and camber for making base 5.00 104.20 C.M.

includinng removing the excavated stuff and depositing on the road side slope as

directed up to 50 mt. lead.

181 Preparation of subgrade with Compacting, Levelling and consolidation of 5.00 4.93 S.M.

subgrade with miniroller /plate vibrator machine including watering and filling in

depressions which occur during the process as directed by engineer in charge.

182 Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering, ramming 0.00 206.00 C.M.

& consolidation etc. complete.

183 Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm compacted 0.00 413.09 C.M.

thickness over the base including necessary compaction, watering etc. complete.

Item includes leveling by using vibratory plates compacted machine and as

directed by engineer in charge.

184 Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm x 50.00 228.00 R.M.

380mm) purchased from SMC's approved paverblock manufacturer & setting in

line, level and in truly vertical position, including filling joints in C.M. 1:1 (1 part

of cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of cement :

part of coarse sand) including watering etc. complete and as directed by engineer

For rounding at the edge of footpath (For Fanning portion) 50.00 274.00 R.M.

185 Providing interlocking type Rubber moulded cement concrete paver block of 50.00 524.00 S.M.

approved shape, design & colour having 60mm thickness (M-35) purchased from

SMC's approved paverblock manufacturer only & fixing of fine sand bedding.

Item includes levelling by using vibratory plates compacted machine. Item also

includes all materials, labour, equipments, tools, plants, watering, cleaning etc.

Without colour 50.00 524.00 S.M.

186 Providing & fixing interlocking type Cement Concrete paver block of approved 30.00 553.00 S.M.

shape & design having 60 mm thickness (M-40) purchased from SMC's approved

paverblock manufacturer only on fine sand bedding. Item includes leveling by

using vibratory plates compacted machine. Item also includes all materials,

Labour, euipments, tools, plants, watering, cleaning etc. complete.

For Road Junction 80 mm thick ( M-50) 10.00 714.00 S.M.

187 Providing & laying Granular sub base (GSB)confirming to Grading-V of Table 50.00 1418.04 C.M.

400.0 of compacted thick of 150mm with specified graded stone metal and sand

mixed in place and laid with mechanical means spreading with motor grader and

compacting with vibratory roller having minimum 80-100 KN static weight to

acheve desired density of 98% of MDD including all material, labour, machinery

with all leads and lift etc. complete.

188 Providing & laying cement concrete Pavement using 1 : 1.5 : 3 (1 cement : 1.5 10.00 5981.00 C.M.

sand : 3 graded stone agg. 20 mm nominal size) & Vaccuum Dewatering

technique including floating surface with a skim powder floater, curing etc.

189 Providing & laying cement concrete Pavement using 1 : 2 : 4 (1 cement : 2 sand : 3.00 5245.25 C.M.

4 graded stone agg. 20 mm nominal size) & Vaccuum Dewatering technique

including floating surface with a skim powder floater, curing etc. complete.

190 Providing and laying 200 micron plastic sheet on prepared sub base For V.D.S 3.00 26.00 S.M.

191 Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total thickness with 4.00 50.00 R.M.

filling of epoxy sealent as directed by engineer in charge

192 MARBLE PASTE WATER PROOFING TREATMENT 50.00 27.00 SQ. fT

Layer-1 : (Liquid Form) White Cement, SBR (Dr.Fixit), Bulbond (Synthetic

Resin Adhesive), Crack Sill Powder, Water.

Layer-2 : (Paste Form) Marble Powder, Marble Paste Liquid,Bulbond,Water.

Layer-3 : (Liquid Form) Asian Paint, Smart Care Damp Proof, Water Etc.)

NOTE :- (1) The whole work is to be executed through specialized agency with a

guarantee of 05 (Five) years given on a prescribed proforma duly stamped (2) The

rate shall include for work at all floors & conducting water proof test as directed.

Item Description Quantity in Per in

193 Dismentaling Old Partition & Ceilling with all lead and lift, labour etc. incl all 0.00 350.00 S.M.

194 Cutting & Refixing Old Partition incl all hardware, material & labour etc. incl all 0.00 350.00 S.M.

195 Providing & Fixing Wooden Floor incl. all material & labour etc. incl all 0.00 3673.00 S.M.

196 Providing & Fixing Woolen Carpet at Floor with all material & labour etc. incl all 0.00 1044.00 S.M.

197 Providing & Fixing 12mm Bison Panel, 50mm Thick Rock Wool & 4mm Thick 0.00 6374.00 S.M.

ACP Panel at Glass Wall Side with all material & labour etc. incl all

198 Supply & Fixing of 16mm.th.Armstrong classic Lite square edge mineral fiber 0.00 980.00 S.M.

celling with 24mm grid (local) G.I. Frame grid consist of 600mm x 600mm. tecno

grid pre coated main runner 38 x 24 x3600 mm, cross T 30 x 24 x 1200 mm,cross

runner 24 x 24 x 600mm, wall Angle 24x24 mm. required length suspension wire

of 2.50mm G.I.& necessary hardware etc. comp. approved by engineer-in-charge

199 Removing of All Scrap Material in tractor with hydraulic trailer and 8 Nos. Of 0.00 2600.00 DAY

labours from Campus Boundry

200 Providing & applying textured matt paint at all floor levels of approved quality in 0.00 58.00 S.M.

two coats after thoroughly brooming the wall or similar surfaces to remove all

dust dirt & loose mortar droppings , Filling Surface imperfections such as holes

and cracks using a mixture of white cement and fine sand only (in the ratio of 1:3)

& watering the surface incl. curing etc. complete to give even shade as per the

instruction of engineer in charge etc. complete. (M.R.)

201 Steel work of square pipe hollow section, as per reqiure size, welded in built up 1000.00 81.00 Kg.

sections, framed work including cutting, hoisting, fixing in position and applying

a priming coat of red lead paint. (A) In beams and joints channels angles, tees,

flats with connection plates or angles cleats as in main and cross beam, hip and

trussed purlins connected to common rafters and the like.(Rate analysis)

202 Providing and fixing 1.20 meter high fencing with 2.0 meter long M.S. angle post 0.00 409.00 R.M.

40mm X 40mm X 6mm and oil painting 3 coats fixed at 2.5 mt.C/C. with five

horizantal lines and two diagonals of galvanised steel barbed wire of 'TATA

make' weighing 9.38 Kg.per 100 meter, strained and fixed to posts with G.I.

staples, including fixing posts in ground with 0.5 m X 0.5 m X 0.5 mt. block in

C.C. 1:5:10 etc. comp.

203 Providing and fixing 20 mm x 20mm x 10 gauge thick (using TATA make 0.00 590.00 R.M.

G.I.wire) galvanise ironwire mess (G.I. Crimped net) including cutting fixing

204 Cutting out cracks of wall or terrace to V section ,cleaningout, grouting with 10.00 41.41 R.M.

cement and sand slurry 1:3 (1 cement : 3 sand ). at any height

205 Applying polymer modify mortar in proportion at 1 : 2 (One Part cement : 2 Part

white sand (sweet water) with chemical (SBR) dosage of minimum 5 litre pe bag

of cement. Also apply bonding agent prior to polymer modify mortar in

proportion of (1 : 1) (1 part SBR : 1 part cement) using Roof, MC and FOSROC

Beam / Columns 0.00 1830.00 S.M.

Ceiling 0.00 1830.00 S.M.

206 Providing & Fixing PVC West Cuplin at various places at all floor approved 0.00 60.50 No.

quality as directed By Eng.in charge.

207 Providing & Fixing S.S. West Cuplin at various places at all floor approved 0.00 93.50 No.

quality as directed By Eng.in charge.

208 Providing and fixing Supply Pipe for Washbasin or sink 0.00 80.00 No.

209 Providing and fixing Jet Sprey Cock at all floor level etc. complete. 0.00 500.00 No.

210 Providing and fixing garden hose pipe with 15 mtr length of approved quality : 0.00 1250.00 No.

Size: - 16-20 mm dia

211 Providing & Fixing Brass Tee at all floor levels, of approved quality including

fixing etc. Complete

212 Providing & Fixing U.P.V.C Tee at all floor levels, of approved quality including

fixing etc. Complete

213 Providing & Fixing U.P.V.C Alba at all floor levels, of approved quality

including fixing etc. Complete

214 Providing and fixing chromium plate bottle trap with necessary coupling of 0.00 331.28 No.

approved quality for wash- basin

215 Providing & Fixing Water proof M-Seal at various places approved quality as 0.00 176.00 No.

directed By Eng.in charge.

216 Providing and fixing

Item Description Quantity in Per in

(A) 40 mm thick RCC cover for simple chamber,s.w.trap & tank Top 5.00 400.00 No.

(B) PVC water tank cover upto 2000 Lit. 5.00 200.00 No.

217 Supplying and fixing C.I. cover 300 mm X 300mm. without frame for gully trap 5.00 660.00 No.

(standard pattern) the weight of cover to be not less than 4.53 Kg.

218 Removing and resetting Existing paver block, including all watering leveling, 50.00 102.00 Sm

cleaning, labour & Equipments chagres etc. complete as per details in tender

specification & as directed by engineer in charge.

219 Removing existing kotah stone flooring in mortar and vertical stone kerbing 50.00 47.72 Sm

including stacking of serviceable material carting at SMC store disposal of

unserviceable material with all lead and lift.

220 Providing and Replace door, Window S.S. Fixtures fix in wooden / Alluminium

(A) 4" S.S. Hinge 2.00 75.00 No.

(B) 5" S.S. Hinge 4.00 85.00 No.

(C) 8" S.S. Aldraf 3.00 175.00 No.

(D) 10" S.S. Aldraf 2.00 200.00 No.

(E) 12" S.S. Aldraf 4.00 250.00 No.

(F) 4" S.S. Handle 4mm. Th. 4.00 5.00 100.00 No.

(G) 6" S.S. Handle 4mm. Th. 1.00 125.00 No.

(H) 4" S.S. Stopper 4mm. Th. 1.00 75.00 No.

(I) 8" S.S. Stopper 4mm. Th. 1.00 125.00 No.

(J) 6" S.S. Pavan Ankdi Heavy duty 1.00 35.00 No.

(H) Alluminium door lock 1.00 200.00 No.

(I) Door Closer 2.00 200.00 No.

Total Amount in Rs. :

Total Amount in Rs. :

Junior Engineer Deputy Engineer

Drainage Department Drainage Department

Surat Municipal Corporation Surat Municipal Corporation

Executive Engineer

Drainage Department

Surat Municipal Corporation