Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹9.9 LAccepted-AOC | l1 | Accepted-AOC l1 |
Tender Value
₹9.9 L
EMD Value
₹24,733
Closing Date
25 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant engineer
Assistant engineer sreekandapuram municipality
Pro No 307/23 -Providing drinking water facilities for various anganwadies
2023_LSGD_573329_8
TN/2/2023-24 dtd 25/04/23
Open Tender
Civil Works - Water Works
Item Rate
60 days
sreekandapuram
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,185
Yes
₹24,733
Yes
8 Aug 2023
18 May 2023
27 May 2023
18 May 2023
25 May 2023
18 May 2023
Amount
Madampam Anganawadi
OD35/2023-2024:supplying and errecting centrifugal pump set for 1HP=075KWH including cost of pump,motor,panel board ,starter,capacitor sunction pipe for a length of 10 metre footvalve,non return valve,and testing etc complete rate adopted from KWA.
OD366914/2022-2023:Supply and erection of 2.5 mm electric cable for bore well pump set
18.15.2:Providing and fixing brass bib cock of approved quality :20 mm nominal bore
18.17.2:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
18.19.1.1:Providing and fixing gun metal non-return valve of approved quality (screwed end): 25 mm nominal boreHorizontal
50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall
50.18.7.3.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge 25 mm dia 12 Kgf/cm2 - Internal work - Exposed on wall
Michealgiri Anganwadi
OD388674/2022-2023: Drilling bore well of suitable size to accommodate well casing pipe of internal dia not less than 150 mm for various strata up to 150 m below ground level having an average 40 m overburden in all classes of soil and rock. inclusive of hire charges of machinery and all other accessories and stores putting up on temporary shed and storing the equipment, cost of fuel, oil and other incidental items to complete the work but excluding the cost of casing pipe etc complete
OD388675/2022-2023:Supply and erection of 180 mm (6kg/cm2) or above dia PVC casing pipe (ISI Marked) and labour charges of conveyance to site etc.
OD388684/2022-2023:Supply and fixing of 180mm dia PVC end cap
OD431267/2022-2023: providing and fixing 32mm HD pipe including all charges etc complete
OD431268/2022-2023:Supply and erection of 2.5 mm electric cable for bore well pump set
OD37/2023-2024:supplying and errecting centrifugal pump set for 1HP=075KWH including cost of pump,motor,panel board ,starter,capacitor sunction pipe for a length of 10 metre footvalve,non return valve,and testing etc complete rate adopted from KWA.
18.17.3:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall
50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
50.18.7.5.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6Kgf/cm2 - Internal work - Exposed on wall
50.18.9.5.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Perumbaramba anganwadi
OD430718/2022-2023: Drilling bore well of suitable size to accommodate well casing pipe of internal dia not less than 150 mm for various strata up to 150 m below ground level having an average 40 m overburden in all classes of soil and rock. inclusive of hire charges of machinery and all other accessories and stores putting up on temporary shed and storing the equipment, cost of fuel, oil and other incidental items to complete the work but excluding the cost of casing pipe etc complete
OD430719/2022-2023:Supply and erection of 180 mm (6kg/cm2) or above dia PVC casing pipe (ISI Marked) and labour charges of conveyance to site etc.
OD430720/2022-2023:Supply and fixing of 180mm dia PVC end cap
OD430721/2022-2023: providing and fixing 32mm HD pipe including all charges etc complete
OD430751/2022-2023:Supply and erection of 2.5 mm electric cable for bore well pump set
OD43/2023-2024:supplying and errecting centrifugal pump set for 1HP=075KWH including cost of pump,motor,panel board ,starter,capacitor sunction pipe for a length of 10 metre footvalve,non return valve,and testing etc complete rate adopted from KWA.
18.17.3:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
50.18.7.5.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall
50.18.9.5.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2
50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
50.18.9.7.1:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2
50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow
17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap
18.54.4:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 90 mm long, weighing not less than 93 gms
Nediyenga Swamimadam anganwadi
OD430731/2022-2023: Drilling bore well of suitable size to accommodate well casing pipe of internal dia not less than 150 mm for various strata up to 150 m below ground level having an average 40 m overburden in all classes of soil and rock. inclusive of hire charges of machinery and all other accessories and stores putting up on temporary shed and storing the equipment, cost of fuel, oil and other incidental items to complete the work but excluding the cost of casing pipe etc complete
OD430732/2022-2023:Supply and erection of 180 mm (6kg/cm2) or above dia PVC casing pipe (ISI Marked) and labour charges of conveyance to site etc.
OD430733/2022-2023:Supply and fixing of 180mm dia PVC end cap
OD430734/2022-2023: providing and fixing 32mm HD pipe including all charges etc complete
OD430735/2022-2023:Supply and erection of 2.5 mm electric cable for bore well pump set
OD45/2023-2024:supplying and errecting centrifugal pump set for 1HP=075KWH including cost of pump,motor,panel board ,starter,capacitor sunction pipe for a length of 10 metre footvalve,non return valve,and testing etc complete rate adopted from KWA.
50.18.9.5.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2
50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
50.18.7.5.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall
18.17.3:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
50.18.9.7.1:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2
50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow
17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap
18.54.4:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 90 mm long, weighing not less than 93 gms
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Cherikkode Anganwadi
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
2.26.1:Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
OD434626/2022-2023:Second lift 3.00-4.50m extra for every additional lift 1.5m or part there of in excavation / banking excavated or stacked materials. All kinds of soil.
OD434664/2022-2023:Third lift 4.50 - 6.00 m Extra for every additional lift 1.5m or part there of in excavation /banking excavated or stacked materials. All kinds of soils.
OD434629/2022-2023:Providing RCC 1:1.5:3 using 20mm metal 1.8m dia, 10cm shell thick and 30cm height for well staining including all cost , conveyance and all labour charges.1
50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete
OD434738/2022-2023:Supplying and erecting submersible pump set (Open well type) for 1HP=0.75kwh including cost of pump motor, panel board, starter, suction pipe, for a length of 10 metre ,foot valve, non return valve and testing etc complete ,rate adopted from KWA.
50.18.9.4.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2
9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
OD435992/2022-2023: providing and fixing 32mm HD pipe including all charges etc complete
OD434631/2022-2023:Providing and fixing PVC valve with CI Wheel of approved quality (screwed end) : 32mm nominal bore.
Ellarinji Anganwadi
OD431197/2022-2023: Drilling bore well of suitable size to accommodate well casing pipe of internal dia not less than 150 mm for various strata up to 150 m below ground level having an average 40 m overburden in all classes of soil and rock. inclusive of hire charges of machinery and all other accessories and stores putting up on temporary shed and storing the equipment, cost of fuel, oil and other incidental items to complete the work but excluding the cost of casing pipe etc complete
OD431196/2022-2023:Supply and erection of 180 mm (6kg/cm2) or above dia PVC casing pipe (ISI Marked) and labour charges of conveyance to site etc.
OD431195/2022-2023:Supply and fixing of 180mm dia PVC end cap
OD431409/2022-2023: providing and fixing 32mm HD pipe including all charges etc complete
OD431410/2022-2023:Supply and erection of 2.5 mm electric cable for bore well pump set
OD47/2023-2024:supplying and errecting centrifugal pump set for 1HP=075KWH including cost of pump,motor,panel board ,starter,capacitor sunction pipe for a length of 10 metre footvalve,non return valve,and testing etc complete rate adopted from KWA.
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
18.17.3:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall
50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
50.18.7.5.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6Kgf/cm2 - Internal work - Exposed on wall
50.18.9.5.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2
17.10.1.2:Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board510x 1040 mm bowl depth 225 mm
50.18.8.7.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2
Aichery Anganwadi
OD431205/2022-2023: Drilling bore well of suitable size to accommodate well casing pipe of internal dia not less than 150 mm for various strata up to 150 m below ground level having an average 40 m overburden in all classes of soil and rock. inclusive of hire charges of machinery and all other accessories and stores putting up on temporary shed and storing the equipment, cost of fuel, oil and other incidental items to complete the work but excluding the cost of casing pipe etc complete
OD431204/2022-2023:Supply and erection of 180 mm (6kg/cm2) or above dia PVC casing pipe (ISI Marked) and labour charges of conveyance to site etc.
OD431203/2022-2023:Supply and fixing of 180mm dia PVC end cap
OD431219/2022-2023: providing and fixing 32mm HD pipe including all charges etc complete
OD431222/2022-2023:Supply and erection of 2.5 mm electric cable for bore well pump set
OD46/2023-2024:supplying and errecting centrifugal pump set for 1HP=075KWH including cost of pump,motor,panel board ,starter,capacitor sunction pipe for a length of 10 metre footvalve,non return valve,and testing etc complete rate adopted from KWA.
18.54.4:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 90 mm long, weighing not less than 93 gms
17.7.3:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
18.17.3:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
50.18.7.5.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6Kgf/cm2 - Internal work - Exposed on wall
50.18.9.5.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2
50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Alakkunnu Anganawadi
OD431306/2022-2023: Drilling bore well of suitable size to accommodate well casing pipe of internal dia not less than 150 mm for various strata up to 150 m below ground level having an average 40 m overburden in all classes of soil and rock. inclusive of hire charges of machinery and all other accessories and stores putting up on temporary shed and storing the equipment, cost of fuel, oil and other incidental items to complete the work but excluding the cost of casing pipe etc complete
OD431311/2022-2023:Supply and erection of 180 mm (6kg/cm2) or above dia PVC casing pipe (ISI Marked) and labour charges of conveyance to site etc.
OD431314/2022-2023:Supply and fixing of 180mm dia PVC end cap
OD431315/2022-2023: providing and fixing 32mm HD pipe including all charges etc complete
OD431317/2022-2023:Supply and erection of 2.5 mm electric cable for bore well pump set
OD44/2023-2024:supplying and errecting centrifugal pump set for 1HP=075KWH including cost of pump,motor,panel board ,starter,capacitor sunction pipe for a length of 10 metre footvalve,non return valve,and testing etc complete rate adopted from KWA.
18.17.3:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
50.18.7.5.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6Kgf/cm2 - Internal work - Exposed on wall
50.18.9.5.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Bidder Name
NIGESH V V
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_852064.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .